Currently Shopping by
- Custom Stock Status: Remove This Item In stock
-
performance:
Air Intake
Diverter Valves
Engine
Exhaust
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
GTI/GTD
XFORCE - BMW F87 M2 Varex Cat Back System
Description
Varex Dual 2.5"-3" Cat Back System
Features
Introducing the highly anticipated Xforce Varex cat back exhaust system for the BMW F87 M2. Engineered for performance and precision, this exhaust system takes your driving experience to the next level.
Designed to bolt directly to the factory downpipe, the system seamlessly splits into a twin 2.5″ center section, ensuring excellent ground clearance. The flow then collects into a single 3″ pipe, entering the Varex muffler. Experience a deep and aggressive exhaust note that will turn heads wherever you go.
Crafted with meticulous attention to detail, the Xforce Varex cat back exhaust system is built to last, providing maximum durability and performance. The quad 4″ tip outlet adds a touch of style to your BMW F87 M2, making a bold statement.
Get ready to unleash the true potential of your BMW F87 M2 with the Xforce Varex cat back exhaust system. Elevate your driving experience and enjoy the power, performance, and the commanding sound that this system delivers. Upgrade today and make a statement on the road.
- 304 Stainless steel
- Clamps to factory down pipe slip joint
- Slits to twin 2.5″
- Collects to single 3″
- Varex rear muffler with dual outlet
- Quad 4″ tips
Regular Price: $2,199.00
Special Price $1,869.15
XFORCE - BMW F22 M235i Varex Cat Back System
Description
Twin 2.5" to 3" Varex cat back system
Features
- Oem size splitting to twin 2.5″ then collecting to 3″ at rear
- Slip joint connections
- Brushed 304 stainless steel
- Varex rear muffler
- 4″ 304 polished tips
Regular Price: $2,199.00
Special Price $1,869.15
XFORCE - BMW F20 M135i - Varex Cat Back System
Description
Varex cat back system
Features
Introducing the revolutionary Xforce Varex cat back exhaust system designed specifically for the BMW F22 M135i. Unleash the true potential of your vehicle with this high-performance exhaust upgrade.
With a seamless bolt-on installation, this system directly connects to the factory downpipe, ensuring a perfect fit. The twin 2.5″ center section provides exceptional ground clearance while optimizing exhaust flow. The flow then converges into a single 3″ pipe, entering the Varex muffler, resulting in an aggressive and throaty exhaust note that commands attention.
Crafted with precision and durability in mind, the Xforce Varex cat back exhaust system is built to withstand the test of time. The system features dual 4″ tip outlets, adding a touch of style and distinction to your BMW F22 M135i.
Experience the exhilaration of improved performance and an unmistakable sound as you accelerate through the gears. Upgrade your BMW F22 M135i with the Xforce Varex cat back exhaust system and make a statement on the road. Upgrade today and take your driving experience to new heights.
- OEM size splitting to twin 2.5″ then collecting to 3″ at rear
- Slip joint connections
- Brushed 304 stainless steel
- Varex rear muffler
- 4″ 304 polished tips
Regular Price: $2,199.00
Special Price $1,869.15
XFORCE - KIA Cerato GT Axle Back Exhaust System
Features
KIA Cerato GT owners worldwide have fallen in love with Xforce Performance Exhaust systems for a reason.
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Cerato GT. The high qualitymuffler provides a step up in terms of sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this Axle-back provides a step up in sound, upgrade to take your KIA Cerato GT to the next level.
- 3″ 304 Stainless steel Mandrel-Bent Pipework
- 3″ inlet – dual 2.5″ Outlet rear muffler
- Quad 3.5″ Double-Wall Slant-Cut Tips
- Straight-through Design for Maximum Performance and Sports Sound
- Fits seamlessly to the factory OEM KIA mounting points.
- All gaskets, Nuts & bolts included for fitment
- Fits Cerato GT (2019-2021), GT Hatch (2019-on), GT HATCH (2022-on), GT Sedan (2019-2021). For 2022 onward sedan use ESKC22AS
Regular Price: $850.00
Special Price $722.50
XFORCE - BMW 1 SERIES F20 M140I (2016-2019)/TOYOTA Supra A90/J29 MK5 (3/2019-on) Turbo Downpipe and Hi-Flow Catalytic Converter
Description
Turbo Downpipe with high flow Cat Converter
Features
- Turbo dump pipe
- 4″ inlet size / 3″ 3/8″ outlet size
- 200 cell metallic high flow cat
- 200 cell metallic high flow cat
- Euro style mesh flex bellow
- Non polished stainless steel
- Tune is recommended after fitment
Regular Price: $645.00
Special Price $548.25
IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$359.00
XFORCE - KIA Cerato GT Catback Exhaust System
Features
The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Forte GT. The high quality muffler provides the ultimate sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this cat-back provides the ideal sound and performance upgrade to take your KIA Cerato GT to the next level.
- 3″ 304 Stainless steel Mandrel-Bent Pipework
- Hot-dog Center Resonator
- 3″ inlet – dual 2.5″ Outlet rear muffler
- Quad 3.5″ Double-Wall Slant-Cut Tips
- Straight-through Design for Maximum Performance and Sports Sound
- Fits seamlessly to the factory OEM KIA mounting points.
- All gaskets, Nuts & bolts included for fitment
$1,200.00
Hyundai I30 SR/N-Line, Cold Air Intake 6-Inch Bell Mouth K&N Filter - (2018-2021)
6-Inch Bell Mouth Cold Air Intake V1.1
Introduction
We are excited to introduce you to our first of many Hyundai I30n bolt-on upgrade parts. Hyundai has outdone themselves with the I30 n, and we are eager to push the limits of this amazing, extremely underrated car. Our aim for our Hyundai i30 n development program is to deliver high-performing parts and intelligent design to provide aftermarket capability with OEM quality. Our team are incredibly passionate about creative and innovative design while maintaining practicality, taking pride in our ability to achieve a flawless fit and finish, time after time. We have put a lot of time into planning our parts development program for the I30 n, with modular integration of future parts already designed into this 6-Inch Bell Mouth Cold Air Intake, The largest available for the Hyundai I30 n. We are in the final stages of finishing three new products for the I30 n, with many more in the planning and early development stages.
Benefits of Fitting a Cold Air Intake
Colder air, better noises, more power$680.00
SAFE & SECURE SHOPPING
