Regular Price: $350.00
Special Price $327.23
Turbosmart's new Kompact Shortie Blow-Off Valve for the Mk7 takes performance to the next level. These valves are a high performance replacement for the Golf's standard diverter valve. Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package. The Plumb Back is a 100% recirculating blow-off valve, routing all vented air back into the intake. This valve operates at a similar level of volume to the standard valve, avoiding unwanted attention. Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the Golf's turbo to operate to its full potential, and for longer.
Regular Price: $330.00
Special Price $327.23
CTS Turbo is proud to release our 2.0T DV (DIVERTER VALVE) KIT for EA888.3 equipped vehicles. The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) is made of billet construction and completely serviceable. Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required. The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions. Our piston design ensures long life, easy installation, complete serviceability, great sound and great value. This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.
Fitment:
B9 Audi A4/A5/Allroad/Q5 (EA888 Gen 3)
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI Jetta (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)
Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Additional red spring is for high boost applications 2bar+
Compact design fits into tight spots easily
Please note you are receiving a special price when you purchase the VW MK8 Golf GTI complete body kit splitter set.
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
DETAILS:
All Flow Designs MK8 Golf GTI Front Lip Splitters and Reinforcement Parts are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.
The Volkswagen MK8 Golf GTI front lip splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
Further customise your front lip splitter with our accessories range (sold separately), which includes adjustable front lip extensions and front lip winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter - the adjustable options allows you to match the width to the wheel setup of your MK8 Golf GTI. The complete MK8 Golf GTI Full Splitter Kit is also available.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
MATERIAL & FINISH:
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.
VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.
Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Winglets (Pair) sold seperately
KIT INCLUDES:
MATERIAL & FINISH:
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.
VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.
Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Extensions (Pair) sold seperately
KIT INCLUDES:
MATERIAL & FINISH:
DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIRED
DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.
VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately
KIT INCLUDES:
MATERIAL & FINISH: