GTI/GTD - CTS Turbo - Supernova - Genuine Audi - Genuine VW

Plug N Play – New Update V2.0 – Brighter

Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your Golf Mk7 with our dynamic variant.
Made specifically for MK7, incorporating the same socket as OEM for easy install, no further coding or modification needed.

• Plug N Play – no coding needed
• Easy 10 min install
• No coding needed
• All Tools Included

Fits

• All VW Golf MK7.0 models 2014-2017 TSI / TDI / GTI / R
• Does not fit VW Golf Mk6
• Does not fit VW Golf MK7.5 Models

What's Included

2pcs – Sequential Mirror LED modules MK7
1pcs – Torx Tool

1pcs – Trim Removal Tool

Genuine VW 2018 LED Facelifted Tail lights Give your MK7 the ultimate look and style. This sleek, modern and elegant tail lights will be sure to turn some heads. Standout from the crowd with the beautiful new LED glow which can be seen on the MK7.5 platform. These OEM tail lights, are built with the highest quality material in German Engineering. These tail lights will fit your halogen, or non-facelifted LED tail lights and give your vehicle a new MK7.5 Dynamic LED look. This kit does require a harness that can be purchased from the link below in order to operate. VCDS coding is also required. Installation is approximately 35-40 minutes using our retrofit adapter harness. Golf MK7 Owners: Please ensure you purchase the correct harness for your vehicle: Golf MK7 - Golf MK7.5 Dynamic LED Tail Light Retrofit Adapter Harness for RHD

Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket

This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.

Compatible with:

Do it right the first time and only purchase a Genuine VW reverse camera.
This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the DIscover Media (MIB 1, or MIB 2), Discover Pro (MIB 1, MIB 2 or MIB 2.5) 

Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with:

• VW Golf MK7

See behind your car with a camera in your boot.

A camera at the back of your car shows you what's behind to make reversing safer and easier.

Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.

Compatible with head unit :
VW Genuine RCD520 
VW Genuine Discover Media (MIB 1, MIB 2)
VW Genuine Discover Pro (MIB 1, MIB 2 or MIB 2.5)

Please note: VAS / OBD11 / VCDS Coding is required after installation.
Professional Installation is recommended, we do not provide installation assistance for this product. 

FAQ's
Does this flip badge camera work with the RCD520?
Yes! It certainly does, no delay timer or AV converter box required. 
What is included in this kit?
The Genuine VW Flip Badge Reverse Camera & Wiring Harness
Will this camera fit an MK5 or MK6 Golf?
No, this camera is designed especially for the MK7 Golf platform only
Will this camera work with an RCD510/RNS510 or RNS315 Radio?
No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)

CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).

The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.

This kit features press-on style supercharger pulley. Check on your vehicle before ordering!

NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.

This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5  intake kits.  These filters can also be used in a custom big turbo application.

Product Details:

3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp

Fitment:

• CTS-IT-270R or CTS-IT-270
• CTS-IT-290
• CTS-IT-300

Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!

CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA

Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.

We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.

Features:

• CAD optimized for maximum flow, 56% larger than factory
• Cast aluminum throttle body elbow, billet aluminum spacer
• CNC machined in house for perfect fitment
• Direct replacement for factory parts between the cold side of the intercooler and the throttle body
• HP gain of up to 20hp on stock turbo, even more with big turbo upgrades
• Compatible with factory intake, CTS Turbo intakes and most other popular intakes (not compatible with Eventuri intake)
• Compatible with factory and aftermarket intercoolers
• Includes a large-bore 2.75″ charge pipe and custom silicone couplers
• Two extra 1/8″ NPT bungs on the charge pipe for watermeth nozzles
• Compatible with 1-bolt and 2-bolt pressure sensors
• DV flange is based on factory design
• Includes hoses and fittings to install on 2019+ DNWA engines

Fitment:

• 8V and 8V.2 Audi RS3 (2018-2020) – DAZA and DNWA models
• 8S Audi TT-RS (2018-2020) – DAZA and DNWA models

CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.

Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag.

Two water/methanol bungs provide an easy way to install injection nozzles.

Product Details

• 2.5″ mandrel-bent aluminum piping
• Billet throttle body inlet adapter
• Precision CNC machined MAP sensor flange
• Robust Black Powdercoated Finish
• 4 ply silicon connector
• Stainless Steel Clamps
• 2 x 1/8″ NPT Water-Methanol Bungs with plugs
• Compatible with factory and CTS Turbo intercoolers (may be compatible with other aftermarket intercoolers)

Fitment

• 2018 – current B9/B9.5 Audi S4 3.0T Turbo
• 2018 – current B9/B9.5 Audi S5 3.0T Turbo