Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value.
Our HPFP Kit can achieve flow rates 50% higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades.
Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated.
There are many reasons why Autotech’s Kit is superior. Here are a few:
~Each piston (9.8mm) and cylinder in Autotech HPFP kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.
~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.
~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.
~HPFP-specific mapping is now commonly available from tuners worldwide.
Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well.
Fits VW/Audi 2.0T FSI 2006-2008.5, MK6 Golf R.
2 kits required for V8 4.2L FSI Audi B7 RS4 / R8 V8 / B8 S5 models.
After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we go rogue, bringing an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.
V5 brings a new ground up design, making it the largest improvement to date.
Deeper amber indicator/turn signal Dual Reverse, Dual Fog Light, RHD + LHD support -V5.1 update Wider indicator/turn signal illumination – edge to edge Reduced moisture ingress Stronger electrical sockets Solid metal canbus decoder – improved thermal cooling, rock solid design Improved weather sealing – Harsh Aussie climate tested, Snow to 45cº
TREND SETTING.
Buy with confidence and get the latest variant. Beware of off the shelf V1.0 non edge to edge designs.
LIGHT OUTPUT EXCEEDS OEM BRIGHTNESS IS ACHIEVED BY DARKENING INTERNALS AND MAINTAINING A CLEAR OUTER LENS FOR MAXIMUM LIGHT TRANSMISSION.
NEW VARIANT UPDATE - V5.1
-Wider Indicator Illumination
-Deeper Amber Indicator Colour
-Dual Fog and Reverse light function
-Increased Diffusion; More Consistent, Less Harsh Indicator Brightness
If we're being honest, the stock Golf 6 halogen tail lights leave a lot to be desired in terms of aesthetics. Get a defined and modern look with these easy install, no coding required LED tail lights for your golf 6.
Features
No Coding Required
Fits all Golf 6 models - TSI/TDI/R/GTI/GTD
100% LED - Standard LED tail lights utilise Halogen globes for Reverse - Fog - Turn Signal
Super Bright Sequential turn signal functions on inner + outer tail light
Right Hand Drive and Left Hand Drive configurable
Dual Reverse, Dual Fog Light
(red variant pictured for illustration. This listing is for black style)
VERSION 5.0, GOING ROGUE.
After years of request we delivered the first MK6 sequential tail lights to market in 2018. Working directly with a well established manufacturer we specified a great product and obtained southern hemisphere distribution rights. Despite the popularity we were not 100% satisfied with the quality. Today we bring an entirely new mould with edge to edge turn signal illumination and many small improvements to deliver the best version yet.
V5.0 brings a new ground up design, making it the largest improvement to date
Deeper amber indicator/turn signal
Wider indicator/turn signal illumination – edge to edge
Reduced moisture ingress
Stronger electrical sockets
Solid metal canbus decoder – improved thermal cooling, rock solid design
V3 2019 Release
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Right Hand Drive MK6 Golf GTI
Details:
Complete the aero stying of your VW MK6 Golf GTI with the rear valance and Flow-Lock diffuser fins from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.
Kit Includes:
Rear valance (pair)
Flow-Lock diffuser fins x6
2 Flow Designs stickers
Fitting kit
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Use of ABS Plastic
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Please note you are receiving a special price when you purchase the MK6 R complete splitter set.
The Flow Designs splitter set is the best exterior mod for your VW MK6 Golf R! With front & side splitters & rear valance with Flow-Lock diffuser fins, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We also have packages that include our MK6 R bolt on accessories range.
MK6 GOLF R LIP SPLITTER KIT INCLUDES:
MK6R V3 front splitter & Aerospacers
MK6R V3 side Splitters (Pair)
MK6R Flow-Lock Rear Diffuser
MK6R V3 rear spats (Pair)
2 Flow Designs stickers
Fitting kit
ADD:Rear Window Vents, Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired
MK6 GOLF R LIP SPLITTER KIT MATERIAL & FINISH:
Front splitter, side splitters, diffuser, rear spats: 10mm thick polyethylene composite, bevelled edges
Hand polished satin black
Flow-Lock fins and rear valance: scratch resistant textured ABS plastic
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
HOW IS YOUR SPLITTER SO STRONG?
Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
WHAT ABOUT CARBON FIBRE?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
USE OF ABS PLASTIC
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Protect your bumper from scrapes or kerbing with our MK6 Golf GTI front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK6 GTI front lip splitter extensionsandMK6 GTI front wingletssold separately.
Protect your body work from scrapes or kerbing with our MK6 Golf GTI side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Installation is simple withpre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.
We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf GTI chassis.
The pre-installed brass thread allow for installation of our MK6 Golf GTI adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.
PLEASE NOTE: MK6 Golf GTI Side Winglets are sold separately
MK6 GOLF GTI SIDE SKIRT SPLITTER V3 WINGLETS KIT INCLUDES:
MK6 Golf GTI side skirt splitters (pair)
2 Flow Designs stickers
Fitting kit
MK6 GOLF GTISIDE SKIRTSPLITTER V3 MATERIAL & FINISH: