GTI/GTD - New South Performance - XFORCE - Genuine VW - P3 Cars - INA - Whiteline
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
- OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
- P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
- LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
- Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Sale
P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.
Regular Price:
$689.00
Special Price
$550.00
Sale
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration - installs the dash and cluster trim for a sleek install
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price:
$689.00
Special Price
$550.00
Sale
Description:
Benefit Note:
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Specification:
SKU |
KDT975 |
Foot Note 1 |
Performance alloy arm |
Foot Note 2 |
X heavy duty - induces NVH |
Foot Note 3 |
3 Year / 60,000Kms |
Components Per |
2 Brackets, 2 Bushings, 2 Tubes, 3 Bolts, 1 Washer, 1 Nut |
Sub brand |
Performance |
EAN |
9319924462131 |
Regular Price:
$389.00
Special Price
$330.65
Sale
For drivers side vent of RHD 2015 GTI or Golf.Not for Jetta
Regular Price:
$127.00
Special Price
$62.00
Sale
This product will only bolt directly to an Xforce axle back system.
- 3" dump pipe from turbo
- 100 cell high flow cat
- "3 connector pipe with resonator
- Will only bolt directly to an Xforce axle back system
Regular Price:
$1,200.00
Special Price
$1,055.00
Sale
Xforce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf GTI platforms.Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.
Regular Price:
$180.00
Special Price
$175.00
Sale
Description
3" 304 Stainless Cat-Back Exhaust System With Varex Muffler
Features
Unlock your MK7, MK7.5 and MK8 Golf GTI’s true exhaust sound output with the XFORCE cat-back exhaust system, complete with VAREX.
Adjusting your sound output and tone is achieved via the VAREX-equipped centre muffler via the supplied remote control. To allow owners to customise their sound output even further, this system is also supplied with an optional resonator-delete pipe to further fine-tune your required sound level and tone.
Packed with neat feature detail, such as the die-cast branded rear split-pipe, the mandrel bent 3” stainless steel system also packs a performance punch, ensuring a reduction in exhaust back-pressure, whilst delivering in terms of sound and looks, being supplied with a 4” polished stainless steel tailpipe trim.
- 304 stainless steel
- 3″ Mandrel-bent pipework
- Volume Adjustable Varex Round Center Muffler with Remote Control
- Optional non-resonated pipe included
- Straight Rear Pipes With Die-Cast “X” logo Embroidered Split-Pipe
- Dual 4″ Polished Stainless Steel Tips
- Straight-Through Design for Maximum Power and Sound.
Regular Price:
$1,370.00
Special Price
$1,205.00
Genuine VW 2018 LED Facelifted Tail lights
Give your MK7 the ultimate look and style. This sleek, modern and elegant tail lights will be sure to turn some heads. Standout from the crowd with the beautiful new LED glow which can be seen on the MK7.5 platform.
These OEM tail lights, are built with the highest quality material in German Engineering. These tail lights will fit your halogen, or non-facelifted LED tail lights and give your vehicle a new MK7.5 Dynamic LED look.
This kit does require a harness that can be purchased from the link below in order to operate. VCDS coding is also required.
Installation is approximately 35-40 minutes using our retrofit adapter harness.
Golf MK7 Owners: Please ensure you purchase the correct harness for your vehicle:
Golf MK7 - Golf MK7.5 Dynamic LED Tail Light Retrofit Adapter Harness for RHD
Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket
This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.
Compatible with: