DESCRIPTION

CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.

These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.

There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.

Features:

• Precision machined aluminum
• Black anodized
• Quick installation.
• NO Check engine light

Fitment:

• 2017-2021 Mercedes-Benz E63/E63S (W213)
• 2018-2021 Mercedes-Benz S63 (W222/C217)
• 2019-2020 G63 AMG (W463)
• 2019-2020 AMG GT 63/AMG GT 63S (X290)

Model

Generation

CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3.  The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors.  Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage.  Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.

DESCRIPTION

We are proud to release the new CTS Turbo Stainless Steel 3″ downpipe with high-flow catalytic converter for the MK6/MK7 Jetta 1.4TSI and MK7 MQB Golf 1.4TSI with EA211 Gen1 and Gen2 engines.

Unfortunately, the factory downpipe that comes as standard equipment in your car was designed for anything but performance.  The factory downpipe severely restricts exhaust flow and therefor has adverse effects on horsepower, especially once your car is “chipped”.  The CTS Turbo downpipe will allow for your exhaust gases to flow smoothly, freeing up the additional ponies that you want, all while look amazing.  Highlights of our downpipe include CNC machined turbine discharge (downpipe) flange, mandrel-bent stainless steel tubing, modular design making installation simple and straight forward, smooth transitions allowing for optimal exhaust gas flow.

Precision fabrication, unparalleled quality and great price point all make the downpipe a must-have for any VW enthusiast that values performance and their pocketbook.

Fitment:

• 2015 – 2021 VW Jetta SE 1.4T TSI EA211
• 2016 – 2021 VW Golf 1.4T TSI (MQB) EA211

NOT COMPATIBLE WITH TWIN-CHARGED or HYBRID ENGINES

Product Details:

• Fitment for multiple models, modular design
• Compatible with factory and aftermarket exhaust
• 200cell metallic race catalytic converter
• T304 Seamless Stainless Steel tubing
• T304 Stainless Steel flanges
• 100% TIG Welded
• T304 Stainless Steel 02 bungs with plugs
• Stainless Steel Clamps
• Great Sound without any drone. Sounds great even with factory exhaust.

Stage 2 software is required to avoid check engine light.

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
All Flow Designs MK8 Golf GTI Front Lip Splitters and Reinforcement Parts are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.

The Volkswagen MK8 Golf GTI front lip splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your front lip splitter with our accessories range (sold separately), which includes adjustable front lip extensions and front lip winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter - the adjustable options allows you to match the width to the wheel setup of your MK8 Golf GTI. The complete MK8 Golf GTI Full Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

KIT INCLUDES:

• MK8 Golf GTI Front Lip Splitter
• Stainless Steel Reinforcement Plate
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI adjustable front lip splitter extensions
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Extensions (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Front Lip Splitter Winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIRED

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.

MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Side Skirt Splitters (pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE SIDE SKIRT REMOVAL

Details:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable side splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.

MK8 Golf GTI Side Skirt Splitters (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Side Skirt Splitter Winglets (pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
Experience Flow-Lock rear diffuser technology for your Volkswagen MK8 Golf GTI, sharing the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

The Flow-Lock interlocking system allows for the final assembly of the diffuser fins without tools or fasteners. A simple push and click and the kit is assembled and ready for installation - this means zero exposed hardware giving you the cleanest look for your MK8 Golf GTI rear. Friendly reminder, the 10 year warranty applies for the rear valance only but does not include the ABS diffuser fins.

No more L-brackets, no additional exposed hardware and no double-sided tape, experience the Flow-Lock difference today! The rear valance and diffuser fins fit nice and snug between the MK8 GTI dual exhaust tips. Giving your MK8 GTI a nice clean look but still upholds an aggressive quality!!!

All Flow Designs MK8 Golf GTI rear diffusers are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your rear diffuser, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

KIT INCLUDES:

• MK8 Golf GTI rear diffuser (rear valance and Flow-Lock diffuser fins)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:
10mm thick polyethylene composite, bevelled edges

• Hand polished satin black
• 4.5mm thick textured ABS
• scratch resistant textured ABS plastic
• CNC engraved logo and features