You have no items in your shopping cart.

Product was successfully added to your shopping cart.

GTI/GTD - CTS Turbo - OSIR - Integrated Engineering

Set Descending Direction

   

Items 1 to 10 of 85 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET
    Sale

    CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET

    CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.  In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

    This turbo blanket fits all IHI turbos found on MQB platform cars

    IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD

    IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro

    IS38 Turbos found on the MK7 Golf R and 8V Audi S3

    CTS Turbo Blanket Heat Tolerance:

    Interior Surface:
    Max Temperature Rating: 2100 Deg F
    Continuous Use Limit: 1800 Deg F

    Exterior Surface:
    Direct Contact Limit: 800 Deg F
    Radiant Heat Limit: 1200 Deg F

    Regular Price: $199.00

    Special Price $189.00

  2. IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY
    Sale

    IE VW MK7 & Audi 8V DSG (DQ250) Transmission Tune | Fits MK7 GTI / A3 & MK7 Golf R / S3 w/ 6 Speeds ONLY

    SHIFT FASTER, DRIVE FASTER

    Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2015+ Golf R, GTI, A3, & S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster.

    LEADING FEATURES

    • Required for high torque IE ECU tunes
    • Lightning fast gear shifts
    • Higher shift points of 6900 RPM
    • Kick down in manual mode eliminated
    • Lag time reduced when starting off in first gear
    • Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000  
    • Drive shift mapping entirely reworked with an enthusiast in mind
    • Flashed directly through OBD-II Port (No TCU removal required)
    • Increased clutch pressure on tap for higher torque without slip
    • Temperature protection remains for safety
    • Gear hunting reduced
    • Gearbox “Torque Limiters” removed

    WHAT DOES A DSG TRANSMISSION TUNE DO?

    The IE DSG Tune for the MQB 2015-2017 Golf R / S3 and 2015-2018 GTI / A3 is expertly calibrated to deliver the full performance potential from your existing ECU tune and modifications. This transmission file retunes the complicated DSG mapping and completely reworks the shift points in drive, sport, and manual shifting. This delivers much, much faster and stronger shifts taking time directly off the 0-60 and ¼ mile times making the car more reliable and fun to drive.   

    REQUIRED FOR SELECT ECU TUNES

    Required for MQB Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points, and selectable launch control. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. 

    ONE TUNE FOR ALL STAGES

    IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades. 

    USER ADJUSTABLE LAUNCH CONTROL

    The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

    Available Launch Control RPMs:

    • 3200 RPM
    • 3400 RPM
    • 3600 RPM
    • 3800 RPM
    • 4000 RPM

    IE DSG TUNE TECHNICAL FEATURES

    HIGHER SHIFT POINTS
    Utilize the whole powerband of your turbocharged VW or Audi engine without the DSG interfering and shifting early.

    DRIVE MAPPING REWORKED
    The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.

    INCREASED CLUTCH PRESSURE
    Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. 

    FLASHED THROUGH OBD-II PORT
    There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.

    TAKE-OFF LAG REDUCED
    The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.

    MULTIPLE LAUNCH RPMS
    The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

    KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE

    The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain

    FLAWLESS OPERATION WITH IE ECU TUNES
    The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.

    VEHICLE FITMENT

    • VW - Golf R 2015-2017 (MK7/MK7.5) W/DSG TRANSMISSION
    • VW - GTI 2015-2018 (MK7/MK7.5) W/DSG TRANSMISSION
    • AUDI - S3 2015-2017 (8V) W/ DSG TRANSMISSION
    • AUDI - A3 2015-2018 (8V) W/ DSG TRANSMISSION

    Regular Price: $999.00

    Special Price $899.00

  3. IE Replacement 5″ Air Filter For IE Intake Kits

    IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.
    $99.95
  4. CTS B-Cool Billet DSG Filter Housing

    Made in Canada from billet T6061 Aluminum Hard anodized black for stealth and longevity Uses OEM O-ring OE-style threads are precision made to fit the transmission just like factory part. Other manufacturers do NOT make this thread. Compatible with OEM Filter Replaces factory part 02E305045 The CTS B-Cool Billet 01E DSG Oil Filter Housing fits Audi, VW, SEAT, and SKODA models equipped with DSG Transmissions (except B8 S4).
    $129.00
  5. CTS Turbo FSI/Golf R Intake Manifold Flap Delete

    The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.

    $199.00
  6. CTS Turbo FSI/Golf R Throttle Pipe CTS Turbo FSI/Golf R Throttle Pipe
    Sale

    CTS Turbo FSI/Golf R Throttle Pipe

    Mandrel bent aluminum piping with black powder coating - CNC machined MAP flange - DV relocation/noise pipe bung - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps

    Regular Price: $299.00

    Special Price $279.00

  7. CTS Turbo Heat Shield Golf R / FSI Specific

    The CTS Turbo Golf R / FSI intake heat shield is designed to mount simply to the factory mounting points. With a brushed aluminium finish this heat shield not only reduces your intake temps, but dresses up the engine bay like no other
    $79.95
  8. CTS Turbo MK5 Torque Arm Insert MY2005.5-2008

    Designed with CAD software for precision fit - Virtually eliminates wheel hop - More consistent shifting for manual and DSG transmissions - Minimum increase in NVH - Includes grade 10.9 hardware for install Our inserts are Made in USA using DuPont Adeprene urethane designed specifically for this application.
    $79.95
  9. CTS Turbo MK6 Billet Torque Arm Insert

    MK5 MY09 onwards MK6 R/GTI/Golf/Jetta/GLI 8J Audi A3/TT 8P Audi A3/TT
    $79.95
  10. CTS Turbo MK5 GTI / MK6 Golf R Air Intake System

    At CTS Turbo we are proud to announce our new air intake system for the transverse 2.0T FSI EA113 VW/Audi range of vehicles.

    The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 2.75″ air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF position, you can be sure that fuel trims will remain perfect.

    All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.

    This intake kit is designed to be compatible with our FSI EA113 BOSS kits; intake pipe features 2x 1/8″ bungs and 1x 1/2″ bung for easy installation of BOSS kits. Plugs are included.

    Product Details:

    • Full 2.75″ Mandrel-bent aluminum piping with black powder coating
    • Compatible with CTS BOSS kits, with provisions for easy installation
    • Reusable 3″ air filter with inverted cone design
    • 4 Ply silicon connectors with stainless steel clamps
    • Air box with rubberized trim
    • Bracketry to prevent rattling under engine torquing
    • Gains ranging from 9-15WHP on stock vehicle, even more if tuned!
    • No CEL, no fuel trim issues

    Fitment:

    • MK5 VW GTI incl. Edition 35 (2006-2008)
    • MK5 VW GLI (2006-2008)
    • MK5 VW EOS (2006-2008)
    • MK6 VW Golf R (2012-2013)
    • MK2 SEAT Leon (2006-2009)
    • MK2 SEAT Cupra R (2006-2012)
    • B6 VW Passat (2006-2010)
    • 8P Audi S3 (2006-2013)
Set Descending Direction

   

Items 1 to 10 of 85 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5