You have no items in your shopping cart.

Product was successfully added to your shopping cart.

GTI/GTD - CTS Turbo - New South Performance - H&R Springs - Integrated Engineering - SuperPro - Genuine VW - Eibach - VW Central - INA - Whiteline - Autotech

Set Ascending Direction

   

Items 1 to 10 of 229 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. H&R Lowering Springs - VW MK8 Golf GTI - Lowers F/R 40mm

    H&R Lowering Springs - Golf MK8 GTI Lowering Levels: Front 40mm Rear 40mm Enhance the look of your vehicle with H&R Lowering Springs. H&R Sport Springs provide a lower center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing sport springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. Sporty look and performance Progressive spring characteristics Less weight by using high tension steel TUV approved
    $715.00
  2. Eibach VW Golf Mk8 GTI Sportline Lowering Springs (F/20-30mm & R/20mm) Eibach VW Golf Mk8 GTI Sportline Lowering Springs (F/20-30mm & R/20mm)
    Sale

    Eibach VW Golf Mk8 GTI Sportline Lowering Springs (F/20-30mm & R/20mm)

    Description:


    Eibach Sportline is an extremely powerful spring system that has been specially designed for enthusiastic motor sports fans who are looking for racing car performance for the road with minimal loss of comfort and maximum driving quality. You achieve ultimate driving dynamics by particularly sporty lowering of the vehicle centre of gravity and by precisely designed, progressive spring rates. Thanks to the lower vehicle centre of gravity, the Sportline sport suspension springs also reduce building up when accelerating, the rolling tilt of the body during cornering and immersion when braking. For Sportline springs, we strongly recommend the use of sports shock absorbers. The Bilstein sport shock absorbers are ideal for this.

    Eibach Part: E20-85-051-05-22
    Range: Sportline
    Front Lowering: 20-30mm (Max front axle load: 1170kg)
    Rear Lowering: 20mm (Max rear axle load: 930kg)
    Axle: Multi-Link Axle, for all standard damping systems

    Regular Price: $602.00

    Special Price $542.00

  3. Eibach VW Golf Mk8 GTI Pro-Kit Lowering Springs (F/15-20mm R/10mm) Eibach VW Golf Mk8 GTI Pro-Kit Lowering Springs (F/15-20mm R/10mm)
    Sale

    Eibach VW Golf Mk8 GTI Pro-Kit Lowering Springs (F/15-20mm R/10mm)

    Product Description:

    Eibach’s Pro-Kit Lowering Springs (E10-85-051-05-22) are an essential upgrade component to your vehicles suspension & chassis setup. Please carefully check compatibility, any pre-requisites for suspension setups (including front & rear axle load and electronic dampening setups). Motorsport has always been one of Eibach’s core competencies and the testing ground for numerous innovations. Eibach’s passion for precision is what racing enthusiasts worldwide appreciate.

    Technical Information

    Eibach Part: E10-85-051-05-22
    Range: Pro-Kit
    Front Lowering: 15-20mm (Max front axle load: 1070kg)
    Rear Lowering: 10mm (Max rear axle load: 930kg)
    Axle: Multi-Link Axle, for all standard damping systems

    Regular Price: $580.00

    Special Price $522.00

  4. MQB to PQ Harness Adapter for VW RCD330/RCD340 Radio MQB to PQ Harness Adapter for VW RCD330/RCD340 Radio
    Sale

    MQB to PQ Harness Adapter for VW RCD330/RCD340 Radio

    This harness is designed to be used for vehicles that have a factory fitted MQB radio and wish to install a VW RCD330/RCD340 Radio. Simply plug in this harness directly into the back of your RCD330G headunit, followed by your vehicles factory quadlock. Compatible with: VW Caddy (2016+) VW Transporter (2016+) If you are unsure whether your vehicle requires this harness, please contact us prior to purchase. Radio models: - RCD330 - RCD340

    Regular Price: $79.00

    Special Price $69.00

  5. Eibach Pro-Kit Performance Springs – VW Golf MK6 1.4 TSI & 1.8 TSI (DSG Only) F/R 30mm Eibach Pro-Kit Performance Springs – VW Golf MK6 1.4 TSI & 1.8 TSI (DSG Only) F/R 30mm
    Sale

    Eibach Pro-Kit Performance Springs – VW Golf MK6 1.4 TSI & 1.8 TSI (DSG Only) F/R 30mm

    • World's leading Performance Suspension Spring System
    • Engineered and tested to work perfectly with stock dampers
    • First step towards a complete sport suspension system
    • Lower center of gravity ? lowers vehicle up to 40 mm
    • Lowering = Traction + Attraction
    • Progressive spring design
    • Performance handling

    Regular Price: $515.00

    Special Price $464.00

  6. Eibach Pro-Kit Performance Springs – VW Golf MK6 1.4 TSI & 1.8 TSI (Manual Only) F/R 30mm

    • World's leading Performance Suspension Spring System
    • Engineered and tested to work perfectly with stock dampers
    • First step towards a complete sport suspension system
    • Lower center of gravity ? lowers vehicle up to 40 mm
    • Lowering = Traction + Attraction
    • Progressive spring design
    • Performance handling
    $515.00
  7. IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $359.00
  8. Eibach Pro-Kit Performance Springs – Audi A5 Sportback 1.8T / 2.0T (2009-2017) Eibach Pro-Kit Performance Springs – Audi A5 Sportback 1.8T / 2.0T (2009-2017)
    Sale

    Eibach Pro-Kit Performance Springs – Audi A5 Sportback 1.8T / 2.0T (2009-2017)

    Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System

    Regular Price: $633.00

    Special Price $570.00

  9. WRX/STI ColumnPod WRX/STI ColumnPod
    Sale

    WRX/STI ColumnPod

    Mounting on top of the steering column, the WRX/STI ColumnPod™ is designed to hold a 2” or 2 1/16” (52mm) gauge on your Impreza WRX/STI (2008-2014) or Forester (2009-2013)

    The unique design offsets the gauge to the left for maximum visibility of the dash instrumentation.

    Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road.

    Our exclusive design hides all wires and tubes from view.

    Regular Price: $94.00

    Special Price $59.00

  10. CTS TURBO AIR FILTER 3″ FOR CTS-IT-105R/220R/260/020

    This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots.  These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.

    3.0″ Inlet x 8.0″ Long x 5.0″ Wide
    High quality molded silicon base and cap
    Stainless steel clamp

    Fitment:

    • CTS-IT-020
    • CTS-IT-105R
    • CTS-IT-220R
    • CTS-IT-260
    $99.00
Set Ascending Direction

   

Items 1 to 10 of 229 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5