You have no items in your shopping cart.

Product was successfully added to your shopping cart.

GTI/GTD

Set Ascending Direction

   

Items 1 to 10 of 71 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $359.00
  2. XFORCE - KIA Cerato GT Catback Exhaust System

    Features

    The high-quality 304 stainless steel construction is built to look and sound amazing while lasting the distance for you to enjoy the miles in your Forte GT. The high quality muffler provides the ultimate sound from the 1.6 Turbo engine. Experience the Enhanced exhaust sound, crackles & pops that KIA owners love, this cat-back provides the ideal sound and performance upgrade to take your KIA Cerato GT to the next level.

    • 3″ 304 Stainless steel Mandrel-Bent Pipework
    • Hot-dog Center Resonator
    • 3″ inlet – dual 2.5″ Outlet rear muffler
    • Quad 3.5″ Double-Wall Slant-Cut Tips
    • Straight-through Design for Maximum Performance and Sports Sound
    • Fits seamlessly to the factory OEM KIA mounting points.
    • All gaskets, Nuts & bolts included for fitment
    $1,200.00
  3. TurboSmart TS-0223-1091 Blow-Off Valves BOV Kompact EM Dual Port VR4 - Fits VW MK6 1.4 TSI & VW Polo GTI 6R

    • Plug and play compatability
    • 400% stronger than the OE Diverter Valve
    • Designed to handle boost pressure up to 30PSI
    • Ideal for lightly modified vehicles
    The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.

    Features:

    - Plumb Back
    - Patent pending integrated pressure control
    - Plug and play compatability
    - Integrated proprietary high-temperature solenoid valve
    - 400% stronger than the OE unit
    $360.00
  4. SuperPro Roll Control Engine Sway Bar Link Kit Fits VW  SuperPro Roll Control Engine Sway Bar Link Kit Fits VW
    Sale

    SuperPro Roll Control Engine Sway Bar Link Kit Fits VW

    • Australian owned
    • 100% Fitment Guarantee
    • Genuine quality brands

    Regular Price: $211.00

    Special Price $184.44

  5. BFI MK7 Torque Arm Insert – Stage 1 – Type 2

    MK7 Golf/GTI/Golf R 8V Audi A3/S3 MK3 Audi TT/TT-S
    $79.95
  6. SuperPro TRC5000 Strut Mount Kit SuperPro TRC5000 Strut Mount Kit
    Sale

    SuperPro TRC5000 Strut Mount Kit

    • Australian owned
    • 100% Fitment Guarantee
    • Genuine quality brands

    Regular Price: $473.00

    Special Price $413.22

  7. Turbosmart Kompact Shortie Dual Port - EVR05 - MK7-7.5 GTI&R

    Turbosmart's new Kompact Shortie Blow-Off Valve for VAG 2.0 TSI engines takes performance to the next level. These valves are a high performance replacement for the standard diverter valve fitted to the current 2.0 TSI range. Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package. The Dual Port offers a 50/50 split between recirculating and vent-to-atmosphere, for quiet operation at low boost, and the high performance sound associated with vent-to-atmosphere BOVs at higher boost. The Dual Port also recirculates enough air to keep the car's ECU happy. Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the turbo to operate to its full potential, and for longer.
    $350.00
  8. Turbosmart BOV Kompact Plumb Back VW Golf MK7 GTI/R

    Turbosmart's new Kompact Shortie Blow-Off Valve for the Mk7 takes performance to the next level. These valves are a high performance replacement for the Golf's standard diverter valve. Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package. The Plumb Back is a 100% recirculating blow-off valve, routing all vented air back into the intake. This valve operates at a similar level of volume to the standard valve, avoiding unwanted attention. Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the Golf's turbo to operate to its full potential, and for longer.

    $330.00
  9. Turbosmart BOV Kompact EM Plumb Back VR1 - MK7-7.5 GTI&R

    • Plug and play compatability
    • 400% stronger than the OE Diverter Valve
    • Designed to handle boost pressure up to 30PSI
    • Ideal for lightly modified vehicles
    The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.

    Features:

    - Plumb Back
    - Patent pending integrated pressure control
    - Plug and play compatability
    - Integrated proprietary high-temperature solenoid valve
    - 400% stronger than the OE unit
    $330.00
  10. FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black
    Sale

    FORGE MOTORSPORT BLOW OFF VALVE BOV | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R - Black

    Product Description

    • Direct OEM replacement
    • Made from the highest quality Aircraft quality T6061 billet aluminium construction
    • Fully compatible with OEM electronics
    • Fully serviceable piston
    • Capable to 600HP (with uprated spring kit)
    • Utilising world leading springs for more precise operation and consistency
    • All internal and external components have been made in the UK
    • Pistons use heat stabilised Viton O-rings
    • Lubricated with high temperature Mobil1 grease
    • Fully serviceable and rebuildable in minutes
    • Unlike other valves on the market, ours produce no check engine lights (EML)
    • Improved dynamic throttle response
    • Consistent turbo boost & reduced turbo lag
    • Covered by the Forge Lifetime Warranty*

    Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

    This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

    Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

    Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

    This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

    ⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

    ⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

    ⭐  Easy installation and sounds fantastic! Money well spent ⭐

    In The Box:
    1 x FMDVMK7A Valve
    1 x Wiring Harness
    1 x Solenoid, Bracket, and Screws
    1 x Uprated Blue Spring
    10 x Cable Ties
    1 x 1000mm of 4mm Vacuum Tube
    1 x 5mm T Piece
    1 x Instructions
    1 x Forge Keyring and Sticker

     

    Regular Price: $399.00

    Special Price $350.00

Set Ascending Direction

   

Items 1 to 10 of 71 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5