You have no items in your shopping cart.

Product was successfully added to your shopping cart.

MK5 GTD (2006-2009) - OSIR - Integrated Engineering - Supernova - Genuine VW - P3 Cars - Flow Designs

Set Descending Direction

   

Items 1 to 10 of 11 total

  1. 1
  2. 2
  1. IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17 IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17
    Sale

    IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17

    One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.

    Regular Price: $184.00

    Special Price $179.00

  2. EVAP Crossover Tube Relocation Kit for 2.0T FSI with IE Valve Cover

    EVAP Crossover Tube Relocation Kit for 2.0T FSI with IE Valve Cover

    $46.00
  3. IE 2.0T FSI Catch Can Kit For IE Billet Valve Cover | Fits MK5, MK6 Golf R, Mk2 TTS

    This recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5as a simple install solution for your billet valve cover and catch can. 
    IE billet valve cover sold separately. 

     

    Product Features

    • Easy install catch can and valve cover kit

    • Complete kit, ready to install

    • Installs with IE billet valve cover (sold separately)

    • All components are black for a sleek stealth install

    • Braided stainless steel/Nylon hose

     

    $1,016.00
  4. VW Golf Mk5/6/7/7.5 License plate LEDs

    Plug n Play, Error Free, Life time warranty.

    New European cars come with LED license plate lights standard from factory for good reason. Not only are they more efficient, they provide a defined modern look. Update the exterior ambience of your vehicle to a crisp, 6000k pure white light with the plug n play Golf License Plate LEDs. Fits all VW Golfs 2005-2018 (MK5 Mk6 MK7). New updated variant, now with 24 month warranty.

    Features

    • Plug n Play
    • Full housing replacement with inbuilt LEDs and canbus decoder
    • 6000k Pure white
    • Error Free, no VCDS coding needed.
    • New revised design
    • Life time warranty.

    Fits all Mk5, MK6, MK7, MK7.5 Models, 2003-2019. TSI/TDI/GT/GTI/GTD/R/R32.

    $34.00
  5. VW Golf MK5/6 Full Interior LED Kit – 11pcs VW Golf MK5/6 Full Interior LED Kit – 11pcs
    Sale

    VW Golf MK5/6 Full Interior LED Kit – 11pcs

    Yellow halogen interior lights are  being superseded in new European cars with white LED lights.  Update your vehicle’s interior ambience with this full plug n play LED interior kit. With High output LEDs where it matters (Glovebox, Footwell and trunk lights) and choose Remnant series overhead LEDs for best visibility or a subtle dim variant.  Since these LEDs have a fantastic colour rendering index, greater detail can be seen with less eye fatigue, the dim variant still provides much better visibility than yellow halogen  lights.

    Regular Price: $99.00

    Special Price $89.00

  6. VW High Output Reverse LED – Golf 4/5 – Polo 6 – Amarok – Jetta Mk5

    The engineering on Volkswagen has never fell short, however many models are still issued with only one low output halogen reverse light from factory. After months of testing various manufacturers, a multitude of knock off ‘Cree’ and ‘OSRAM’ LEDs, we are proud to announce our own, High Output ‘Remnant Series’, Reverse LED which utilises Samsung LED Chips.
    $21.00
  7. Remnant Footwell LED – VW Golf 5/6/7/7.5 – Jetta MK6 -Scirocco (Pair)

    Update the ambient aesthetics of your vehicle with our latest Remnant footwell LEDs. Now a full housing with inbuilt LEDs, which makes for a Plug N Play install without the need to open or modify the original lights.
    $29.00
  8. IE POWERlink Flash Cable | Direct-Port ECU Tune Tool

    Description

    This listing is for the IE POWERlink Flash Tool only.
    You may also purchase this cable with IE performance tunes for your vehicle (sold separately).

    POWER IN THE PALM OF YOUR HAND

    Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!

    LEADING FEATURES

    • Uploads IE Performance Tunes (sold separately)
    • Apple & Android mobile flashing app (supported platforms)
    • Flashes engine & transmission tunes
    • Direct OBD2 vehicle flashing in only minutes
    • Customizable live gauge display (Mobile)
    • Octane and feature switching (varies by platform)
    • Upgrade tune stages for matching hardware
    • Return to 100% stock programming at anytime
    • Read and Clear diagnostic codes
    • Check and clear emissions monitors
    • Data-logging (Windows 10+ laptop)

    FLASH WITH A LAPTOP

    Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.

    DEVICE PORTS OS PROC. POWER RAM

    Laptop or Tablet

    Wifi & USB

    Windows 10 or newer

    32 or 64 bit

    1.0ghz or greater

    4GB or greater

    NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.

    $299.00
  9. Genuine VW/Audi OEM Canbus Gateway Upgrade

    Most commonly used to eliminate battery drain issues in Pre-2009 model Volkswagen cars when upgrading the radio to a later model such as the RNS510, RCD510 ,RCD330, RCD340 etc.

    The Canbus Gateway Module, will require coding using software such as VCDS or OBDII. 

    Installation instructions: https://www.my-gti.com/2296/can-bus-gateway-removing-installing-and-upgrading-volkswagen-golf

    $139.00
  10. Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc
    Sale

    Volkswagen Genuine Flip Badge Static Rear View AV Composite Reverse Camera - Fits VW MK5, MK6, Polo 6R, Polo 6C, Passat B7 & B8, T-Roc

    Do it right the first time and only purchase a Genuine VW reverse camera. 
    This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.

    Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with: 

    • VW Golf MK5
    • VW Golf MK6
    • VW Polo 6R / 6C (Bracket Required)
    • VW Passat B7/B8 (Sedan Only)
    • VW T-Roc

    See behind your car with a camera in your boot.

    A camera at the back of your car shows you what's behind to make reversing safer and easier.

    Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

    The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

    Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.


    Compatible with head unit :
    VW Genuine RCD330 / RCD340 - 6RD035187B
    VW Genuine Discover Media
    VW Genuine Discover Pro
    Radiosystem: Composition Media
    Not compatible with Composition Media radios with the following part numbers :
    5G0035820
    5G0035819
    5G0035812

    Please note: VAS / OBD11 / VCDS Coding is required after installation. 
    Professional Installation is recommended, we do not provide installation assistance for this product. 

    FAQ's
    Does this flip badge camera work with the RCD330?
    Yes! It certainly does, no delay timer or AV converter box required. 
    What is included in this kit?
    The Genuine VW Flip Badge Reverse Camera & Wiring Harness
    Will this camera work with an RCD510/RNS510 or RNS315 Radio?
    No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)
    26-pin-rgb-connector

    Regular Price: $499.00

    Special Price $329.00

Set Descending Direction

   

Items 1 to 10 of 11 total

  1. 1
  2. 2