You have no items in your shopping cart.

Product was successfully added to your shopping cart.

MK5 GTI (2006-2009)

Set Descending Direction

   

4 Item(s)

  1. H&R Lowering Springs - VW MK5 Golf GTI - Lowers F/R 30mm

    H&R Lowering Springs - VW MK5 Golf GTI
    $605.00
  2. IE Billet Valve Cover for 2.0T FSI Engines

    Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!

    PRODUCT DETAILS

    IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.

    MACHINED DESIGN

    Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.

    FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY

    This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.

    PRODUCT FEATURES

     

    • Replaces factory plastic valve cover
    • Uses factory valve cover gasket
    • In-house CNC machined from aluminum
    • Includes o ring sealed matching billet oil cap
    • -10AN breather outlet for catch can setups

    ADDITIONAL PARTS REQUIRED

     

    EVAP CROSSOVER TUBE RELOCATION KIT

    The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11


    CATCH CAN KIT FOR BILLET VALVE COVER

    The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3

     

    VEHICLE FITMENT

    • Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
    • Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
    • Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
    • Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
    • VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
    • VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
    • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
    • VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
    • VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*

    *This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.

    $1,045.00
  3. P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – VW MK5 Golf GTI (2007 - 2009) P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – VW MK5 Golf GTI (2007 - 2009)
    CYBER MONDAY

    P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – VW MK5 Golf GTI (2007 - 2009)

    P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Right Hand Drive VW MK5 GTI

    Regular Price: $594.00

    Special Price $534.60

  4. P3 Cars Analog Gauge - VW Golf MK5 GTI (2005-2009)

    P3 Cars - V3 2019 Release

    NEW FEATURES

    • New control box and updated screen bargraph
    • Updated harness with streamlined connectors
    • New improved color coded obd2 harness
    • Read D.T.C's on command
    • Remove unwanted PIDs / gauge modes
    • Configure units individually for English/Metric
    • Calibrate vehicle speed reading
    • Read AFR in Lambda (vehicles with wideband)
    • Auto-detect available PIDs / sensors
    • Pre-configured analog inputs for P3 Sensors

    The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

    4 Available Analog Readouts 

    • Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
    • Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
    • Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
    • Battery voltage (red wire / black wire - read through power and ground wires)

    • optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

    OEM Vent Option

    • We install the display in an OEM vent for your vehicle to make your install even easier.

    Analog gauge base kit includes

    • Integrated display
    • Analog Box control unit
    • Main harness
    • Hard-wire harness
    • Analog boost sensor *boost tap not included
    • Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
    • 3 zip ties
    • 2 scotchlok wire taps

     Questions? Check out our P3 Analog Gauge install/config page for details.

Set Descending Direction

   

4 Item(s)