MK6 GTI (2010-2014) - Forge Motorsports - Flow Designs

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

 

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.

Details: Complete the aero stying of your VW MK6 Golf GTI with the rear valance and Flow-Lock diffuser fins from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Kit Includes: Rear valance (pair) Flow-Lock diffuser fins x6 2 Flow Designs stickers Fitting kit CNC engraved logo and features, hand polish and packed all in Melbourne's outer east. Material: Valance: 10mm thick polyethylene composite, bevelled edges Flow-Lock Diffuser Fins: 4.5mm thick textured ABS Finish: Valance: Hand polished satin black Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

DETAILS

Protect your bumper from scrapes or kerbing with our MK6 Golf GTI front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

MK6 GTI front lip splitter extensions and MK6 GTI front winglets sold separately. 

---

MK6 GOLF GTI LIP SPLITTER KIT INCLUDES:

• MK6 Golf GTI front lip splitter
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit

MK6 GOLF GTI LIP SPLITTER MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DETAILS

Protect your body work from scrapes or kerbing with our MK6 Golf GTI side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

Installation is simple with pre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.

We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf GTI chassis.

The pre-installed brass thread allow for installation of our MK6 Golf GTI adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.

PLEASE NOTE: MK6 Golf GTI Side Winglets are sold separately

---

MK6 GOLF GTI SIDE SKIRT SPLITTER V3 WINGLETS KIT INCLUDES:

• MK6 Golf GTI side skirt splitters (pair)
• 2 Flow Designs stickers
• Fitting kit

MK6 GOLF GTI SIDE SKIRT SPLITTER V3 MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

Volkswagen MK6 Golf GTI Rear Spats (Pair) Details: Complete the aero styling of your VW MK6 Golf GTI with Flow Designs rear spats! The rear spats line up perfectly with the Golf GTI's stock rear bumper & car body & are impact resistant so they will not crack. Install is easy as instructions are provided. Kit Includes: Rear spats (pair) 2 Flow Designs stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

DETAILS

Our adjustable front splitter winglets will bolt directly onto our MK6 Golf GTI front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The MK6 Golf GTI front splitter winglets are only compatible with Flow Designs MK6 GTI front lip splitter - designed to be an adjustable direct bolt-on accessory. 

MK6 GTI front lip splitter and MK6 GTI front extensions sold separately. 

---

KIT INCLUDES

• Adjustable front splitter winglets (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• 4.5mm thick textured ABS 

FINISH

• Scratch resistant textured ABS plastic

DETAILS

Our adjustable side skirt splitter winglets will bolt directly onto our MK6 Golf GTI side skirt splitters thanks to the pre-pressed in threaded brass fittings on our side skirt splitters. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The MK6 Golf GTI side skirt splitter winglets are only compatible with Flow Designs MK6 GTI side skirt splitters - designed to be an adjustable direct bolt-on accessory. 

MK6 Golf GTI side skirt splitter sold separately. 

---

MK6 GOLF GTI SIDE SKIRT SPLITTER WINGLETS KIT INCLUDES:

• Adjustable side skirt splitter winglets (pair)
• 2 Flow Designs stickers
• Fitting kit

MK6 GOLF GTI SIDE SKIRT SPLITTER WINGLETS MATERIAL & FINISH:

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

DETAILS

Our adjustable rear spat winglets will bolt directly onto our MK6 Golf GTI rear spats/pods thanks to the pre-pressed in threaded brass fittings on our rear spats/pods. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The MK6 Golf GTI rear winglets are only compatible with Flow Designs MK6 GTI rear spats/pods - designed to be an adjustable direct bolt-on accessory. 

MK6 GTI rear spats/pods sold separately. 

---

MK6 GOLF GTI REAR SPAT/POD WINGLETS KIT INCLUDES:

• Adjustable rear winglets (pair)
• 2 Flow Designs sticker

MK6 GOLF GTI REAR SPAT/POD WINGLETS MATERIAL & FINISH

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic