Currently Shopping by
- Custom Stock Status: Remove This Item In stock
-
performance:
Air Intake
Engine
Turbo
-
Brands:
Eibach
Integrated Engineering
Leyo Motorsport
T-carbon
- Filter By Custom Stock Status
- Filter By performance
- Filter By Brands
- Filter By Price
- -
MK7.5 GTI (2017+) - Leyo Motorsport - Integrated Engineering - T-carbon - Eibach
Eibach VW Golf Mk8 GTI Pro-Kit Lowering Springs (F/15-20mm R/10mm)
Product Description:
Eibach’s Pro-Kit Lowering Springs (E10-85-051-05-22) are an essential upgrade component to your vehicles suspension & chassis setup. Please carefully check compatibility, any pre-requisites for suspension setups (including front & rear axle load and electronic dampening setups). Motorsport has always been one of Eibach’s core competencies and the testing ground for numerous innovations. Eibach’s passion for precision is what racing enthusiasts worldwide appreciate.
Technical Information
Eibach Part: E10-85-051-05-22
Range: Pro-Kit
Front Lowering: 15-20mm (Max front axle load: 1070kg)
Rear Lowering: 10mm (Max rear axle load: 930kg)
Axle: Multi-Link Axle, for all standard damping systemsRegular Price: $580.00
Special Price $522.00
IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
$359.00
IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
SPECIFICATIONS
- High-gloss true carbon fiber construction
- Factory style mounts
- Stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum bottom plate
- Stainless laser-etched logo plate
- 5" pleated cotton filter
COMPATIBILITY
- 2017-On Audi S4 B9 3.0T Turbocharged
- 2017-On Audi S5 B9 3.0T Turbocharged
Regular Price: $1,894.00
Special Price $1,749.00
IE TrueFlex Sensor Harness For MQB Engines | Fits VW MK7 & Audi 8V
LEADING FEATURES
- Required for IE TrueFlex MQB tunes
- Allows for instant adjustments from 91 pump to full E85
- Harness for VW MK7 & Audi 8V EA888.3 engines
- Sends sensor data in real-time to IE ECU calibrations
- Includes everything needed to install
OVERVIEW
This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.
Kit includes:
- (1x) IE TrueFlex Wiring Harness
- (1x) 2 amp Fuse
- (1x) Ethanol Sensor
- (2x) Ethanol Sensor Quick Connect Couplers
- (2x) Hose Clamps
INSTALLATION
This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.
TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!
$359.00
IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
$129.00
IE Shifter Cable End Bushing Set for VW MK5 & MK6
PRODUCT FEATURES
- Eliminates excessive play from OE rubber bushings
- Greatly Reduces chances of missed shifts
- CNC machined in-house for precise fitment
- Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILSSay goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
- VW - Golf R 2012-2012 (MK6) 6 speed transmisison
- VW - GTI 2009 (MK5) 6 speed transmisison
- VW - GTI 2010-2014 (MK6) 6 speed transmisison
- VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta 2008-2009 (MK5) 5 speed transmisison
- VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
- VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
- VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
$79.95
LEYO - Diverter Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement..
-
Improved throttle response
-
Consistent turbo boost.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.
SUGGESTED SPRING INSTALLATION
Above figure is only preference. Please refer vehicle modification needs.
$399.00-
LEYO Blow Off Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on the All New Re-Designed Leyo Motorsports latest in-house designed Blow Off Valve. Leyo Motorsport Blow Off Valve's multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Blow Off Valve has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We offer a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Set yourself apart from the rest of the boosted crowd and get your vehicle the best automotive Blow Off Valve available at Leyo Motorsport.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement.
-
Improved throttle response.
-
Consistent turbo boost & Prevent boost leak.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Great sound.
-
Holds up to 600HP (with uprated spring kit) .
$399.00-
LEYO Boost Tap
Description:
Directly plugs into the manifold where the factory MAP is located, LEYO Boost Tap provides the most reliable solution to create a vacuum/boost port for boost monitoring. The dual port design offers hassle free multiple boost references with direct installation, no fabrication required.
Specifications:
-
Dual port boost tap allows for multiple boost references.
-
CNC machined T6061 aluminum structure.
-
Heavy-duty screw plug included.
$80.00-
LEYO - DSG Oil Filter Housing
Description:Made from T6061 billet aluminum, LEYO DSG Oil Filter Housing not only adds aesthetic appeal to the engine bay, but specially designed fin also provides effective heat dispersion for the DSG under load. Heat resistant to prolong optimum operational temperature.
*Only fits 6 speed DSG DQ250 wet.
Specifications:
-
T6061 Billet aluminum construction.
-
Hard coat anodized finish for impeccable appearance and heat resistance.
-
Promotes oil heat dispersion.
$125.99-
SAFE & SECURE SHOPPING
