CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
Fitment:
This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.
Kit includes:
This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.
TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!
This charge pipe upgrade Kit for 2.0T and 1.8T MK7/8V TSI engines includes two quality silicone intercooler inlet/outlet hoses and four high-strength band clamps for a direct installation. These hoses are a direct replacement for both IE FDS V2 Intercoolers and the stock factory equipped intercooler. Your new charge pipes feature a flow maximized design with no restrictions for optimized airflow.
Manufactured from multi-ply reinforced silicone for long-life and reliability against expansion or stretching under extreme boost pressures from upgraded turbos and tunes. The ends are molded with a inner flat edge that creates a stop for a perfect and easy no-fuss install and increased reliability against hoses popping off or leaking.
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
PRODUCT FEATURES
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
Varex 3" Cat back system
Regular Price: $1,699.00
Special Price $1,359.20
Hyundai Kona N 3" Varex Catback System
Are you ready to take your Hyundai Kona N to the next level?
Here at Xforce, we have fallen in love with the Hyundai N range of vehicles. As soon as we tested our first cat back system we knew how special these Hyundai Kona N vehicles are.We’ve spent countless hours in design,development and testing on each Hyundai N Vehicle to ensure the absolute best performance and sound is achieved.We even have a few Hyundai N and N-line vehicles in our staff carpark!
With our new Varex Valved cat back system, get ready to let your engine roar,crackle and pop like it should while offering the ability to take it back a notch when you need the sophistication that you come to expect from a Hyundai N.
Our patented Varex Valved muffler with vehicle-specific internal design adds a high-quality increased performance sound when in the open position whilst delivering quiet and calm when you need it.
To finish things off our 4.5” double wall polished tips compliment the rear of the vehicle perfectly.
We know you will love this system just as we did in developing it.
To take it to the next level, add a Smartbox for the ultimate in control using our patented Bluetooth smartphone app to provide pre-set automatic valve control, geo fencing and more.Drive mode integration is available with the Smartbox by using our BiModal intergration cable part #BMC01.
Regular Price: $1,699.00
Special Price $1,359.20
Varex 3" Cat back system
Are you ready to take your Hyundai i30 N Premium Sedan to the next level?
Here at Xforce, we have fallen in love with the Hyundai i30 N Premium Sedan turbo vehicles. As soon as we tested our first cat back system we knew how special these Hyundai i30 N Premium vehicles can be.
With our new Varex cat back system, get ready to let your engine roar like it should while offering the ability to take it back a notch when you need the sophistication that you come to expect from a Hyundai.
Our patented Varex muffler with vehicle-specific internal design adds a high-quality performance sound when in the open position whilst delivering quiet when you need it.
To finish things off our 4.5” double wall polished tips compliment the rear of the vehicle perfectly.
We know you will love this system just as we did in developing it.
Regular Price: $1,699.00
Special Price $1,359.20
Matt Black 4″ Tips
This tip part number contain 4 tips in the box.
Regular Price: $340.00
Special Price $272.00
Matte Black quad 4" tips
Add the finishing touch of personalization to your KIA Cerato GT with our Matte Black coated 4″ outlet tips. The tips are supplied with the 304 stainless steel clamps and fit seamlessly to the Xforce catback system and provides a premium look to the rear of the KIA Cerato GT.
Regular Price: $210.00
Special Price $168.00