CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower. In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.
This turbo blanket fits all IHI turbos found on MQB platform cars
IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD
IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro
IS38 Turbos found on the MK7 Golf R and 8V Audi S3
CTS Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F
Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F
Regular Price: $199.00
Special Price $189.00
CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles. The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow. Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.
The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!
The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!
Features:
Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps
Fits the following vehicles:
Mounting on top of the steering column, the WRX/STI ColumnPod™ is designed to hold a 2” or 2 1/16” (52mm) gauge on your Impreza WRX/STI (2008-2014) or Forester (2009-2013)
The unique design offsets the gauge to the left for maximum visibility of the dash instrumentation.
Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road.
Our exclusive design hides all wires and tubes from view.
Regular Price: $94.00
Special Price $49.00
This is a CTS Turbo universal 3″ low profile cone filter, it has a tapered design to fit in tight spots. These filters are used in our MK4 1.8T, 2.0T FSI, 2.oT TSI, B8 A4 intake kits. Also these filters can also be used in a custom big turbo application.
3.0″ Inlet x 8.0″ Long x 5.0″ Wide
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5 intake kits. These filters can also be used in a custom big turbo application.
Product Details:
3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp
Fitment:
Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
Fitment:
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment:
CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.
The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.
Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. By removing the restriction you gain 6-7HP and improve the throttle response!
Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.
For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.
NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)
Compatible with factory and CTS Turbo outlet pipes.
NOT FOR MQB VEHICLES!
Fitment:
CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.
These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.
There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.
Generation
Make | Model | Year | Generation |
---|---|---|---|
MERCEDEZ-BENZ | AMG GT 63 | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | AMG GT 63S | 2019 - 2020 | X290 |
MERCEDEZ-BENZ | E63 | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | E63S | 2017 - 2021 | W213 |
MERCEDEZ-BENZ | G63 | 2019 - 2020 | W463 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | C217 |
MERCEDEZ-BENZ | S63 | 2018 - 2021 | W222 |
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
Made from the highest quality T6061 billet aluminium construction.
Direct OEM replacement..
Improved throttle response
Consistent turbo boost.
Reduced turbo lag .
Fully compatible with OE electronics.
Fully serviceable piston .
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.