MK7.5 GTI (2017+) - CTS Turbo - IPE - P3 Cars

DESCRIPTION

CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.  Installation is very straight forward and only required basic hand tools.

Product Details:

•   Made in Canada from billet T6061 Aluminum
•   Hard anodized black for stealth and longevity
•   Uses OEM O-ring
•   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
•   Installation of CTS-HW-0243 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
•   Compatible with OEM Filter

The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.

ADDITIONAL INFORMATION

Model

Generation

CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.

The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.

Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise.  By removing the restriction you gain 6-7HP and improve the throttle response!

Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.

For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.

NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)

Compatible with factory and CTS Turbo outlet pipes.

NOT FOR MQB VEHICLES!

Fitment:

• Volkswagen Beetle (MK2) Gen3 ONLY
• Volkswagen Jetta (MK6) 1.8TSI & GLI 2.0T (2013.5-2018)
• Volkswagen Scirocco (MK3) Gen3 ONLY
• Volkswagen Passat 1.8TSI & 2.0TSI (B7) Gen3 ONLY

DESCRIPTION

CTS Turbo B9 S4/S5 3.0T (EA839) high flow cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts – unleash your B9 S4/S5 3.0T potential!

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from cast T304 stainless steel, hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS B9 S4/S5 3.0T EA839 high flow cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Designed and tested on a real car in the real world
• 200 cell steel high-flow race cat
• Cast stainless steel body
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust
• Install hardware included (gaskets not included)

Fitment:

• 2018+ Audi S4 3.0T (EA839)
• 2018+ Audi S5 3.0T (EA839)

To remove the CEL that will occur, proper tuning software must be used.

DESCRIPTION

CTS Turbo B9 Audi SQ5 High-Flow Cat is made to maximize exhaust flow for highest power gains. Do not compromise performance and sound with factory parts.

Designed using the latest in CAD technology; this part is made to fit perfectly in place of restrictive factory catalytic converter. Manufactured from CAST T304 stainless steel; hand TIG welded and back-purged to ensure years of reliable performance.

In addition to unleashing the power and performance of your 3.0T, the CTS Audi SQ5 High-Flow Cat will make your vehicle sound like an S-car really should. When installed with factory exhaust it produces a sporty growl with much more pronounced exhaust “crackle” on downshift. While up-shifting you will enjoy a confident “braappp!” as you bang through all 8 gears. The sound will be even louder if you already have an aftermarket exhaust system.

Product Details:

• Includes 200cell sport catalytic converter
• Designed and tested on a real car in the real world
• Cast T304 stainless steel, TIG welded back-purged construction
• Replaces restrictive factory catalytic converter
• Great power upgrade with uncompromising performance
• Incredible sporty exhaust sound, subtle when cruising
• No drone with factory exhaust

Fitment:

• 2018+ B9 Audi SQ5 3.oT

To remove the CEL that will occur, proper stage 2 tuning software must be used.

DESCRIPTION

CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.

These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.

There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.

Features:

• Precision machined aluminum
• Black anodized
• Quick installation.
• NO Check engine light

Fitment:

• 2017-2021 Mercedes-Benz E63/E63S (W213)
• 2018-2021 Mercedes-Benz S63 (W222/C217)
• 2019-2020 G63 AMG (W463)
• 2019-2020 AMG GT 63/AMG GT 63S (X290)

Model

Generation

CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3.  The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors.  Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage.  Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.

DESCRIPTION

We are proud to release the new CTS Turbo Stainless Steel 3″ downpipe with high-flow catalytic converter for the MK6/MK7 Jetta 1.4TSI and MK7 MQB Golf 1.4TSI with EA211 Gen1 and Gen2 engines.

Unfortunately, the factory downpipe that comes as standard equipment in your car was designed for anything but performance.  The factory downpipe severely restricts exhaust flow and therefor has adverse effects on horsepower, especially once your car is “chipped”.  The CTS Turbo downpipe will allow for your exhaust gases to flow smoothly, freeing up the additional ponies that you want, all while look amazing.  Highlights of our downpipe include CNC machined turbine discharge (downpipe) flange, mandrel-bent stainless steel tubing, modular design making installation simple and straight forward, smooth transitions allowing for optimal exhaust gas flow.

Precision fabrication, unparalleled quality and great price point all make the downpipe a must-have for any VW enthusiast that values performance and their pocketbook.

Fitment:

• 2015 – 2021 VW Jetta SE 1.4T TSI EA211
• 2016 – 2021 VW Golf 1.4T TSI (MQB) EA211

NOT COMPATIBLE WITH TWIN-CHARGED or HYBRID ENGINES

Product Details:

• Fitment for multiple models, modular design
• Compatible with factory and aftermarket exhaust
• 200cell metallic race catalytic converter
• T304 Seamless Stainless Steel tubing
• T304 Stainless Steel flanges
• 100% TIG Welded
• T304 Stainless Steel 02 bungs with plugs
• Stainless Steel Clamps
• Great Sound without any drone. Sounds great even with factory exhaust.

Stage 2 software is required to avoid check engine light.

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

OEM Vent Option

• We install the display in an OEM vent to make your install even easier

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!

Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

4 Available Analog Readouts 

• Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
• Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
• Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
• Battery voltage (red wire / black wire - read through power and ground wires)

• optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

Optional Add-Ons

• OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
• P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
• LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
• Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...

OEM Vent Option

• We install the display in an OEM vent for your vehicle to make your install even easier.

Analog gauge base kit includes

• Integrated display
• Analog Box control unit
• Main harness
• Hard-wire harness
• Analog boost sensor *boost tap not included
• Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
• 3 zip ties
• 2 scotchlok wire taps

The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

4 Available Analog Readouts 

• Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
• Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
• Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
• Battery voltage (red wire / black wire - read through power and ground wires)

• optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

Optional Add-Ons

• OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
• P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
• LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
• Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...

Analog gauge base kit includes

• Integrated display
• Analog Box control unit
• Main harness
• Hard-wire harness
• Analog boost sensor *boost tap not included
• Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
• 3 zip ties
• 2 scotchlok wire taps