This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.
Kit includes:
This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.
TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!
This charge pipe upgrade Kit for 2.0T and 1.8T MK7/8V TSI engines includes two quality silicone intercooler inlet/outlet hoses and four high-strength band clamps for a direct installation. These hoses are a direct replacement for both IE FDS V2 Intercoolers and the stock factory equipped intercooler. Your new charge pipes feature a flow maximized design with no restrictions for optimized airflow.
Manufactured from multi-ply reinforced silicone for long-life and reliability against expansion or stretching under extreme boost pressures from upgraded turbos and tunes. The ends are molded with a inner flat edge that creates a stop for a perfect and easy no-fuss install and increased reliability against hoses popping off or leaking.
This harness is designed to be used for vehicles that have a factory fitted MQB harness and wish to install a Genuine VW Composition Media or Genuine VW Discover Media Radio Unit.
Simply plug in this harness directly into the back of your quad lock harness and then into your Genuine VW MIB 2 Composition Media or Discover Media radio unit.
If you are unsure whether your vehicle requires this harness, please contact us prior to purchase.
Compatible Radio models:
Regular Price: $79.00
Special Price $69.00
This is a replacement air filter for CTS Turbo Intake - CTS Turbo 8V.2 RS3 FL / 8S TTRS EVO Intake (2018+)
High quality molded silicon base and cap
Stainless steel clamp
Fitment:
Fitment:
3" 304 Stainless Cat-Back Exhaust System With Varex Muffler
Unlock your MK7, MK7.5 and MK8 Golf GTI’s true exhaust sound output with the XFORCE cat-back exhaust system, complete with VAREX.
Adjusting your sound output and tone is achieved via the VAREX-equipped centre muffler via the supplied remote control. To allow owners to customise their sound output even further, this system is also supplied with an optional resonator-delete pipe to further fine-tune your required sound level and tone.
Packed with neat feature detail, such as the die-cast branded rear split-pipe, the mandrel bent 3” stainless steel system also packs a performance punch, ensuring a reduction in exhaust back-pressure, whilst delivering in terms of sound and looks, being supplied with a 4” polished stainless steel tailpipe trim.
Regular Price: $1,370.00
Special Price $1,205.00
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
PRODUCT FEATURES
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.
Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag.
Two water/methanol bungs provide an easy way to install injection nozzles.
Product Details
Fitment
CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil. Installation is very straight forward and only required basic hand tools.
Product Details:
The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.
Weight | 2 lbs |
---|---|
Dimensions | 6 × 6 × 6 in |
Generation
Make | Model | Year | Generation |
---|---|---|---|
AUDI | A6 | 2005 - 2011 | C6 |
AUDI | A6 | 2012 - 2017 | C7 |
AUDI | A7 | 2012 - 2017 | C7 |
AUDI | S4 | 2010 - 2016 | B8/8.5 |
AUDI | S5 | 2008 - 2017 | B8/8.5 |
Regular Price: $129.00
Special Price $99.00
CTS Turbo is proud to release our high flow Turbo Muffler delete for the Non-MQB Gen3 EA888.3 1.8TSI and 2.0TSI engines with the stock turbo.
The CTS Turbo Muffler delete is a one-piece design CNC constructed from T6 6061 aircraft-grade aluminum and hard anodized to reduce wear.
Our Turbo Muffler delete replaces the restrictive, power-robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. By removing the restriction you gain 6-7HP and improve the throttle response!
Our kit installs in 30 minutes with hand tools, fits perfectly and looks great.
For those of you that want optimal power and boost response, the CTS Turbo Gen3 TSI Turbo Muffler Delete is your answer.
NOTE: compatible only with factory Garrett/Honeywell MGT1752S turbo on EA888.3 TSI (turbocharger OE part number 06K145874)
Compatible with factory and CTS Turbo outlet pipes.
NOT FOR MQB VEHICLES!
Fitment: