Currently Shopping by
-
Brands:
Flow Designs
Forge Motorsports
Genuine VW
INA
Integrated Engineering
VW Central
XFORCE
- Filter By cosmetics
- Filter By Custom Stock Status
- Filter By performance
- Filter By Brands
- Filter By Price
- -
MK7 GTI (2014+) - Forge Motorsports - Integrated Engineering - XFORCE - Genuine VW - VW Central - Flow Designs - INA
Set of 5 Ignition Coil Pack for Audi RS3 8V
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehiclesBuy a set of 4 Now!
$240.00
Set of 4 Ignition Coil Pack for Audi RS3 8V.5 & VW MK7 / MK7.5 GTI & R, Audi S3 8V
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehiclesBuy a set of 4 Now!
Regular Price: $196.00
Special Price $189.00
Flow Designs - MK7/7.5/8 Golf GTI & R Window Vents (Pair)
https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf$175.00
ECS Manifold Port Boost Tap Kit
Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!$99.00
Flow Designs - MK7 Golf GTI Full Lip Splitter Set (With Rear Aero Valance & Fairing)
DESCRIPTION
Suitable for Volkswagen MK7 Golf GTI (2012-2016)
PACKAGE PRICE FOR THIS SET INCLUDES:
- MK7 Golf GTI front lip splitter with bumper reinforcement bracket
- MK7 Golf GTI side skirt splitters
- MK7 Golf GTI rear spats
- MK7 Golf GTI rear valance & fairing
- Please select your choice of Extension OR Winglet Accessories OR ALL Accessories in the MK7 Golf GTI range (MK7 Golf GTI front extensions, MK7 Golf GTI front winglets, MK7 Golf GTI side winglets, MK7 Golf GTI rear winglets)
- ADD: Rear Window Vents (Pair), Rear Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired.
Please note you are receiving a special price when you purchase the VW MK7 Golf GTI complete body kit splitter set.
DETAILS:
Get the original and best splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK7 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK7 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
VOLKSWAGEN MK7 GOLF GTI FULL LIP SPLITTER KIT INCLUDES:
- MK7 Golf GTI front lip splitter & bumper reinforcement bracket
- MK7 Golf GTI side skirt splitters (pair)
- MK7 Golf GTI rear valance & fairing
- MK7 Golf GTI rear spats/pods (pair)
- WITH All Accessories Package OR Winglets Package: MK7 Golf GTI adjustable front winglets (pair)
- WITH All Accessories Package OR Winglets Package: MK7 Golf GTI adjustable side winglets (pair)
- WITH All Accessories Package OR Winglets Package: MK7 Golf GTI adjustable rear winglets (pair)
- WITH All Accessories Package OR Extensions Package: MK7 Golf GTI adjustable front extensions (pair)
- x2 Flow Designs stickers
- x1 Flow Designs air freshener
- Fitting kit
VOLKSWAGEN MK7 GOLF GTI FULL LIP SPLITTER KIT MATERIAL & FINISH:
- Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
- Hand polished satin black
- Rear fairing, winglets and extensions: scratch resistant textured ABS plastic
- Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
- Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
- Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
$1,555.00
XFORCE Resonator Delete Kit - VW MK7/MK7.5 GOLF GTI
Xforce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf GTI platforms.Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.Regular Price: $180.00
Special Price $175.00
Forge Motorsport Turbo Blanket - VW Golf MK7 / MK7.5 GTI & R, Audi S3 8V - Fits T4, T5, T25, GTX28, GTX30, EFR6258
Product Description
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
· Stainless Steel Rivets
· Stainless Steel Fasteners
· Carbon fabric Outer Shell
· Calcium Magnesium Silicate Wool constructed Inner Core
· High temperature silica fabricThe unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
- T4
- T5
- T25
- The Garrett GTX28 and GTX30 Range
- Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C
· Continuous Use Limit: 1832°F1000°CExterior Surface:
· Direct Contact Limit: 1800°F/982°C
· Radiant Heat Limit: 2500°F/1371°C
Complimentary Products
Uprated Intercooler
High Flow Discharge Pipe
Carbon Fibre Induction Kit
$169.00
Flow Designs - MK7.5/MK7 Golf GTI & R Rear Spoiler Extension
FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.$290.00
XFORCE - 4″ANGLE CUT BURNT BLUE TIPS - Fits VW MK6 & MK7 GTI
VW GTI MK6 & MK7/MK7.5 GTI
- Burnt Blue Coating Look
Regular Price: $170.00
Special Price $149.00
XFORCE - 4″ANGLE CUT BLACK TIPS - Fits VW MK6 & MK7/MK7.5 GTI
4" Black Tips for use with Xforce MK6 & MK7/MK7.5 GTI Systems.
Regular Price: $170.00
Special Price $149.00
SAFE & SECURE SHOPPING
