Product was successfully added to your shopping cart.

.: R Models - Turbosmart - H&R Springs - Leyo Motorsport - XFORCE - Ingo Noak

H&R Lowering Springs - VW MK6 Golf R - Lowers F/R 20mm

H&R Lowering Springs - VW MK6 Golf R

$605.00

Out of stock
H&R Lowering Springs - VW MK7 & MK7.5 Golf VII R Lowers F/R 25mm

H&R Lowering Springs - VW MK7 & MK7.5 Golf VII R

$605.00

Out of stock
H&R Lowering Springs - VW MK7 & MK7.5 Golf 1.2 TSI, 1.4 TSI, 1.6TDI FWD 11/12> - Lowers F/R 35mm

H&R 35MM LOWERING SUSPENSION SPRINGS

Golf 7/7.5 1.2T Si, 1.4T Si, 1.6TDi FWD 11/12>

Part Number: 28843-1

Front Lowering: 35mm
Rear Lowering: 35mm
Front Axle Weight: Up to 1010kg
Rear Axle Weight: Up to 940kg

$600.00

Add to Cart
H&R Lowering Springs - VW MK8 Golf GTI - Lowers F/R 40mm

H&R Lowering Springs - Golf MK8 GTI Lowering Levels: Front 40mm Rear 40mm Enhance the look of your vehicle with H&R Lowering Springs. H&R Sport Springs provide a lower center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing sport springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. Sporty look and performance Progressive spring characteristics Less weight by using high tension steel TUV approved

$715.00

Out of stock
Sale
XFORCE - VW GOLF MK5 R32 and MK6 R Cat Back Exhaust System
Description

Stainless Steel 3″ Cat Back Exhaust System
Features

This high-performance aftermarket exhaust component is designed to enhance the performance of your Golf MK6 R, MK5 R32, providing improved horsepower, torque, and a deeper, more aggressive exhaust tone. The Xforce cat back system is made from high-quality stainless steel and features mandrel-bent tubing for maximum exhaust flow, resulting in improved engine performance.

This Xforce cat back system is designed to be a direct bolt-on replacement for your factory exhaust component, making installation quick and easy. The precise fit and expert craftsmanship ensure that your Golf MK6 R will perform at its best, giving you the peak in performance and style.

304 stainless steel

3″ pipe work

OE size adaptors

Straight through centre resonator

Straight pipe rear

4″ polished stainless steel clamp on tips
Regular Price: $1,095.00

Special Price $963.60

Add to Cart
Sale

Turbosmart BOV Kompact VAG 2.0T V2 Plumb Back

Kompact VAG V2 Plumb Back has been specifically to suit the 2.0L VAG engine Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new Kompact VAG V2 Plumb Back uses O-Ring sealed piston which, coupled with it's billet aluminium construction give it over 30PSI boost handling capability. Included with each Kompact VAG V2 Plumb Back kit: Model specific valve, Mounting screws and Spring clamps.

Regular Price: $320.00

Special Price $313.59

Add to Cart
Sale
Turbosmart BOV SP Dual Port 2.0L VAG Golf R (MK6)/ Audi S3
- Distinctive vent-to-atmostphre BOV sound
- Suitable for stock or lightly modified vehicles
- Supplied blanking plug gives the option of converting to a full recirculating or full vent-to-atmosphere valve
- Eliminates compressor surge, even in stock applications
These new Kompact Dual Ports offer an alternative to the existing Kompact Plumb Backs for the below cars, for owners who want the sound of a Dual Port BOV, but do not require the heavier-duty performance of the larger and higher priced Type 5.

The Kompact is suited to owners of otherwise stock or mildly modified vehicles, seeking the improved performance of an Turbosmart BOV with that classic vent-to-atmosphere sound.

The existing Kompact Plumb Back for these applications is ideal for those who prefer the quieter operation of a recirculating BOV, while the Type 5 is ideal for more highly modified cars running increased boost levels.

The VAG Type 5 Smart Port Diverter Valve features innovative new drive-by-wire friendly staging technology. This eliminates compressor surge at both low throttle and high engine load while smoothly integrating with factory engine mapping. Plus a new hard-anodised, lightweight, aluminium piston provides better valve response and prolonged piston life.
Regular Price: $480.00

Special Price $449.96

Add to Cart
Sale

Turbosmart BOV Kompact VAG 2.0T V2 - Dual Port

1Review(s)

Kompact VAG 2.0T V2 - Dual Port TS-0203-1041 Details Applications Instructions Accessories Kompact VAG V2 Dual Port has been specifically to suit the 2.0L VAG engine Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new Kompact VAG V2 Dual Port uses O-Ring sealed piston which, coupled with it's billet aluminium construction give it over 30PSI boost handling capability. VAG V2 Dual Port kit: Model specific valve, Mounting screws and Spring clamps.

Regular Price: $350.00

Special Price $345.41

Add to Cart
LEYO - VW MK5/MK6 GTI BILLET PADDLE SHIFT EXTENSION
Description:

For the ultimate driving experience, you need the connection directly at your fingertips. Leyo Motorsport understands that when it comes to perfecting the exit of an apex, gear changes need to be precise and fluently timed. Welcome to the greatest edition and interior modification for you performance vehicle, the Leyo Motorsport Aluminium paddle shifters. Made from 6061 billet aluminium, these shift extensions will be the classiest addition to your interior yet. Available in multiple finishes and coated with a hard anodisedÂ finish, Leyo Motorsport have truly delivered on our most in-demand product.

Leyo Motorsport endeavours to get you the purest driving experience by manufacturing products that are race proven with durability in mind. Order today and pursue your very own ultimate driving experience.

Specifications:
- The ultimate addition to your performance vehicle.
- Patented design (Pending).
- Direct OEM bolt-on. Clips right over existing paddle shifters.
- Comes with all components required to get your car looking amazing.
- Ergonomic back CNC surface.
- Scratch Free for your OEM plastics paddle.
- Undergoes 6 stage hand polishing.
$226.79

Out of stock
LEYO AIR Cold Air Intake System
Description:
Looking dull in the engine bay? Want to spice it up a bit? Get your beloved MK5 GTI the bad ass 21st century look with the Leyo Motorsport MK5 GTI Cold Air Intake System.

Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel).

As this kit is compatible with the Golf MK6 Golf R, one day when you decide to level up to the 6R, you can pop your beloved Leyo intake right into the 6R’s engine bay

(don’t show the fellow that sold you the 6R too soon as he might want his car back).

*This product is only for use on the race track.

Specifications:

OEM fitment requires no fabrication.

Unique quality and design.

Track and dyno proven for greater horsepower gain.

Direct bolt on & easy installation.

Easy installation.

Intake Heat shield.
$699.99

Add to Cart