.: R Models - H&R Springs - Supernova - XFORCE - Genuine Audi - P3 Cars
H&R Lowering Springs - MK5 R32
H&R Lowering Springs - VW MK6 Golf R
H&R Lowering Springs - VW MK7 & MK7.5 Golf VII R
H&R Lowering Springs - VW MK7 Golf GTI
H&R 35MM LOWERING SUSPENSION SPRINGS
Golf 7/7.5 1.2T Si, 1.4T Si, 1.6TDi FWD 11/12>
Part Number: 28843-1
Front Lowering: 35mm
Rear Lowering: 35mm
Front Axle Weight: Up to 1010kg
Rear Axle Weight: Up to 940kg
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
Battery voltage (red wire / black wire - read through power and ground wires)
optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
Integrated display
Analog Box control unit
Main harness
Hard-wire harness
Analog boost sensor *boost tap not included
Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
3 zip ties
2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
H&R Sport Sway Bars are crafted from a special 50CRV4 steel alloy, the highest tensile strength available.
The quality of the material and design guarantees smooth transitional sway bar function, decreasing feedback response time and increasing stiffness over stock.
H&R Sport Sway Bars improve lateral stability and cornering grip, while reducing body roll. H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase stiffness and reduce body roll while maintaining comfort and increasing cornering control, lateral stability, and grip.
A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness.
Being 100% German made means a commitment to doing it right and giving you the best quality product.
Features:
- Reduces body roll
- Highest tensile strength available
- Works with DCC (adaptive suspension)
- Special urethane/Teflon composite bushes that are maintenance free
Swaybar Size:
- Front 24mm
- Rear 26mm
Adjustable:
- Front x2
- Rear x2
Compatibility:
- Audi A3 8P 2003-2012 4WD
- Audi S3 8P 2003-2012 4WD
- Skoda SUPERB 3T SEDAN 4WD
- Skoda OCTAVIA 1Z SEDAN + WAGON 4WD
- VW GOLF MK5 2003-2008 4WD
- VW GOLF MK6 2008-2012 4WD
- VW PASSAT B6/B7 2005-2014 4WD
- VW Tiguan 5N 2007-2015 4WD
Sale
Yellow halogen interior lights are being superseded in new European cars with white LED lights. Update your vehicle’s interior ambience with this full plug n play LED interior kit. With High output LEDs where it matters (Glovebox, Footwell and trunk lights) and choose Remnant series overhead LEDs for best visibility or a subtle dim variant. Since these LEDs have a fantastic colour rendering index, greater detail can be seen with less eye fatigue, the dim variant still provides much better visibility than yellow halogen lights.
Regular Price:
$99.00
Special Price
$89.00
The engineering on Volkswagen has never fell short, however many models are still issued with only one low output halogen reverse light from factory. After months of testing various manufacturers, a multitude of knock off ‘Cree’ and ‘OSRAM’ LEDs, we are proud to announce our own, High Output ‘Remnant Series’, Reverse LED which utilises Samsung LED Chips.
Sale
Description
Stainless Steel 3″ Cat Back Exhaust System
Features
This high-performance aftermarket exhaust component is designed to enhance the performance of your Golf MK6 R, MK5 R32, providing improved horsepower, torque, and a deeper, more aggressive exhaust tone. The Xforce cat back system is made from high-quality stainless steel and features mandrel-bent tubing for maximum exhaust flow, resulting in improved engine performance.
This Xforce cat back system is designed to be a direct bolt-on replacement for your factory exhaust component, making installation quick and easy. The precise fit and expert craftsmanship ensure that your Golf MK6 R will perform at its best, giving you the peak in performance and style.
- 304 stainless steel
- 3″ pipe work
- OE size adaptors
- Straight through centre resonator
- Straight pipe rear
- 4″ polished stainless steel clamp on tips
Regular Price:
$1,095.00
Special Price
$963.60