Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

Buy a set of 4 Now!

Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

Buy a set of 4 Now!

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

MK7 GOLF R FULL LIP SPLITTER SET

Package price for this set includes:

• MK7 Golf R front lip splitter V3
• MK7 Golf R side skirt splitters V3
• MK7 Golf R rear lip spats/pods V3
• MK7 Golf R Flow-Lock rear diffuser OR rear aero valance (please select)
• Please select your choice of WITHOUT accessories or WITH all accessories in the MK7 R range (front extensions, front winglets, side winglets, rear winglets)

DESCRIPTION CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details: 60mm aluminum piping with CTS logo 5-ply silicon coupler Factory mounting points are used for perfect fitment Durable black powdercoat finish For 7-speed DSG/S-tronic transmissions only Compatible with factory and upgraded turbos Compatible with factory and upgraded intakes Compatible with factory and upgraded intercoolers Parts Included: Upper turbo outlet silicon Lower turbo outlet pipe 2 clamps Installation hardware Fitment: 2018+ VW Golf R DSG 7-speed 2019+ VW GLI DSG 7-speed 2019+ VW GTI DSG 7-speed 2018+ Audi A3 S-Tronic 7-speed 2018+ Audi S3 S-Tronic 7-speed 2018+ Audi TT, TT-S S-Tronic 7-speed NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275

We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.

This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally,  we finished the assembly by balancing it on a VSR high-speed balancer.

This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.

Features: 

• Complete brand new turbocharger; no need for core to be sent it or purchased
• Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
• Billet MHI-style TD06 compressor wheel
• High performance 9 blade turbine wheel
• Stainless steel turbine housing
• VSR Balanced to exceed OE tolerances
• Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
• Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
• Compatible with OE or aftermarket turbo inlets and turbo outlets

Fitment:

• 2015+ VW Golf/Sportwagen/Alltrack
• 2015+ VW GTI
• 2015+ VW Golf R
• 2019+ VW Jetta GLI
• 2018+ VW Arteon
• 2015+ Audi A3
• 2015+ Audi S3
• 2015+ Audi TT
• 2015+ Audi TTS

 NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.

Gaskets, wastegate actuator, turbo outlet fitting not included.

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold. The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.

DETAILS

Please note you are receiving a special price when you purchase the MK7 R complete body kit splitter set.

• Please select the rear option you want in your kit: Flow-Lock rear diffuser or rear aero valance

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• V3 front lip splitter & Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• V3 side skirt splitters (pair)
• Flow-Lock rear diffuser OR Rear aero valance & fairing
• V3 rear lip spats/pods (pair)
• WITH all accessories package: Adjustable front extensions (pair)
• WITH all accessories package: Adjustable front winglets (Pair)
• WITH all accessories package: Adjustable side winglets (Pair)
• WITH all accessories package: Adjustable rear winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• Front lip splitter, side skirt splitters, rear aero valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• Flow-Lock diffuser fins OR rear fairing: scratch resistant textured ABS plastic
• CNC engraved logo and features