The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it shouldnot be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
T4
T5
T25
The Garrett GTX28 and GTX30 Range
Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C · Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C · Radiant Heat Limit: 2500°F/1371°C
THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES
The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.
⭐ Excellent quality product & easy to fit ⭐
The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.
The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
As with all Forge products, this hose comes with a lifetime warranty*
H&R Sport Springs - Volkswagen Golf R Wagon (MK7)
Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.
H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany.
Features:
Lowers the center of gravity
Reduces body roll
Reduces wheel gap
Lower wind resistance
Front Drop: 25mm
Rear Drop: 25mm
Protect your bumper from scrapes or kerbing with our MK7 Golf R front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK7 Golf R front extensions and MK7 Golf R front winglets sold separately.
KIT INCLUDES
MK7 Golf R front lip splitter
Pre-mounted adjustable Aerospacers
Stainless steel crossbar mounts (pair: left & right)
Protect your body work from scrapes or kerbing with our MK7 Golf R side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Installation is simple withpre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.
We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf R chassis.
The pre-installed brass thread allow for installation of our MK7 Golf R adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.
VW MK7 Golf R Rear Valance & Flow-Lock Diffuser Fins
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All new diffuser fins featuring Flow-Lock interlocking integral assembly system allows installation without the need of tools or fasteners.
No more double sided tape, nuts, bolts and "L" brackets.
Strong, secure, easy installation.
This part is only compatible with our new VW MK7R kit.
Read More
Kit Includes:
3x Flow-Lock Diffuser Fins (Left, Middle Right)
Centre Valance with Flow-Lock channels
2 Flow Designs Stickers
Fitting kit
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic
Rear Spats sold separately.
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
VW MK7 Golf R Rear Valance & Fairing
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Kit Includes:
Centre Valance & Fairing
2 Flow Designs Stickers
Fitting kit
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Finish:
Valance: Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Protect your body work from scrapes or kerbing with our MK7 Golf R rear bumper spats/pods! All products in our core range are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
The pre-installed brass thread allow for installation of our MK7 Golf R adjustable rear winglets which are sold separately as a bolt-on accessory to suit our rear spats/pods.
Our adjustable front lip splitters extensions will bolt directly onto our MK7 Golf R front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
The MK7 Golf R front splitter extensions are only compatible with Flow Designs MK7 R front lip splitter - designed to be an adjustable direct bolt-on accessory.
MK7 Golf R front lip splitter and MK7 Golf R front winglets sold separately.
Volkswagen MK7 Golf R Front Winglets (Pair)
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
VW MK7 Golf R Front Winglets are only compatible with Flow Designs MK7 R front splitter only which is designed to be an adjustable direct bolt-on accessory.
Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm.
Can also be used in conjunction with MK7 Golf R front extensions (sold separately).
Kit Includes:
Front winglets (pair)
2 Flow Designs stickers
Fitting kit
Material:
4.5mm thick ABS plastic
Finish:
Scratch resistant textured ABS plastic