Currently Shopping by
- Custom Stock Status: Remove This Item In stock
-
Brands:
Autotech
Integrated Engineering
New South Performance
Whiteline
XFORCE
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
.: R Models - New South Performance - Integrated Engineering - XFORCE - Whiteline - Autotech
Whiteline - Rear Control Arm Upper - Outer Bushing Kit
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle$70.00
Whiteline Performance - Front and Rear Coil Springs - Lowered
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 4.1kg/mm (229lb/in) front rated springs that provide a 20mm drop while the 4.8kg/mm (269lb/in) rated rears deliver a desirable 20mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.$502.00
Mk5/Mk6 ConsolePod
The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console. Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver. The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.Regular Price: $75.00
Special Price $45.00
XFORCE - VW GOLF MK5 R32 and MK6 R Cat Back Exhaust System
Description
Stainless Steel 3″ Cat Back Exhaust System
Features
This high-performance aftermarket exhaust component is designed to enhance the performance of your Golf MK6 R, MK5 R32, providing improved horsepower, torque, and a deeper, more aggressive exhaust tone. The Xforce cat back system is made from high-quality stainless steel and features mandrel-bent tubing for maximum exhaust flow, resulting in improved engine performance.
This Xforce cat back system is designed to be a direct bolt-on replacement for your factory exhaust component, making installation quick and easy. The precise fit and expert craftsmanship ensure that your Golf MK6 R will perform at its best, giving you the peak in performance and style.
- 304 stainless steel
- 3″ pipe work
- OE size adaptors
- Straight through centre resonator
- Straight pipe rear
- 4″ polished stainless steel clamp on tips
Regular Price: $1,095.00
Special Price $963.60
Whiteline Performance - Front Roll Centre/Bump Steer - Correction Kit
A must for lowered vehicles, Whiteline roll centre, bump steer and camber correction kits are designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.$301.00
IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P
The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.
Regular Price: $1,899.00
Special Price $1,769.00
IE MK6 GOLF R / MK5 GTI COLD AIR INTAKE KIT - V2 2020 Release
The IE MK6 Golf R Cold Air Intake Kit is the perfect intake upgrade for your engine bay. Benefits include added horsepower and torque, perfect MAF scaling, improved throttle response, and increased turbo noise. Peak gains are generally 10 Horsepower and Torque.
Regular Price: $799.00
Special Price $719.96
IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17
One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.
Regular Price: $184.00
Special Price $179.00
IE POWERlink Flash Cable | Direct-Port ECU Tune Tool
Description
This listing is for the IE POWERlink Flash Tool only.
POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
LEADING FEATURES
- Uploads IE Performance Tunes (sold separately)
- Apple & Android mobile flashing app (supported platforms)
- Flashes engine & transmission tunes
- Direct OBD2 vehicle flashing in only minutes
- Customizable live gauge display (Mobile)
- Octane and feature switching (varies by platform)
- Upgrade tune stages for matching hardware
- Return to 100% stock programming at anytime
- Read and Clear diagnostic codes
- Check and clear emissions monitors
- Data-logging (Windows 10+ laptop)
FLASH WITH A LAPTOP
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE PORTS OS PROC. POWER RAM Laptop or Tablet
Wifi & USB
Windows 10 or newer
32 or 64 bit
1.0ghz or greater
4GB or greater
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
$299.00
IE VW & Audi 2.0T FSI K04 Performance ECU Tune | Fits MK6 Golf R & 8J TTS & Scirocco R
Regular Price: $769.00
Special Price $692.00
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
