.: R Models - IPE - IROAD - New South Performance - Leyo Motorsport - XFORCE - P3 Cars - INA - Autotech
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
Battery voltage (red wire / black wire - read through power and ground wires)
optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
Integrated display
Analog Box control unit
Main harness
Hard-wire harness
Analog boost sensor *boost tap not included
Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
3 zip ties
2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
Sale
The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console.
Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver.
The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.
Regular Price:
$75.00
Special Price
$45.00
Sale
Description
Stainless Steel 3″ Cat Back Exhaust System
Features
This high-performance aftermarket exhaust component is designed to enhance the performance of your Golf MK6 R, MK5 R32, providing improved horsepower, torque, and a deeper, more aggressive exhaust tone. The Xforce cat back system is made from high-quality stainless steel and features mandrel-bent tubing for maximum exhaust flow, resulting in improved engine performance.
This Xforce cat back system is designed to be a direct bolt-on replacement for your factory exhaust component, making installation quick and easy. The precise fit and expert craftsmanship ensure that your Golf MK6 R will perform at its best, giving you the peak in performance and style.
- 304 stainless steel
- 3″ pipe work
- OE size adaptors
- Straight through centre resonator
- Straight pipe rear
- 4″ polished stainless steel clamp on tips
Regular Price:
$1,095.00
Special Price
$963.60
Sale
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Right Hand Drive VW MK5 R32
Regular Price:
$594.00
Special Price
$534.60
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Description:
For the ultimate driving experience, you need the connection directly at your fingertips. Leyo Motorsport understands that when it comes to perfecting the exit of an apex, gear changes need to be precise and fluently timed. Welcome to the greatest edition and interior modification for you performance vehicle, the Leyo Motorsport Aluminium paddle shifters. Made from 6061 billet aluminium, these shift extensions will be the classiest addition to your interior yet. Available in multiple finishes and coated with a hard anodised finish, Leyo Motorsport have truly delivered on our most in-demand product.
Leyo Motorsport endeavours to get you the purest driving experience by manufacturing products that are race proven with durability in mind. Order today and pursue your very own ultimate driving experience.
Specifications:
- The ultimate addition to your performance vehicle.
- Patented design (Pending).
- Direct OEM bolt-on. Clips right over existing paddle shifters.
- Comes with all components required to get your car looking amazing.
- Ergonomic back CNC surface.
- Scratch Free for your OEM plastics paddle.
- Undergoes 6 stage hand polishing.
Description:
Looking dull in the engine bay? Want to spice it up a bit? Get your beloved MK5 GTI the bad ass 21st century look with the Leyo Motorsport MK5 GTI Cold Air Intake System.
Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel).
As this kit is compatible with the Golf MK6 Golf R, one day when you decide to level up to the 6R, you can pop your beloved Leyo intake right into the 6R’s engine bay
(don’t show the fellow that sold you the 6R too soon as he might want his car back).
*This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
Description:
Presenting you the new Leyo Motorsport Double Cone high flow air filter. These performance air filter has an inverted filtration cone on the top to greatly increase filtration surface. It is available in 3” inlet. With the increased filtration surface, the engine no longer needs to gasp for air after you have mod your ride. Filtration surface is made from nonwoven fabric providing superior filtration.
*This product is only for use on the race track.
Specifications:
-
High airflow with superior filtration.
-
Clamp on design for easy installation.
-
Top inverted filtration cone for maximum air flow.
-
For MK5 GTI / MK6 R cold air intake system replacement.
Sale
FEATURES;
Polished stainless steel
3″ pipe work
Straight through sports muffler
Varex Muffler with twin outlet
Twin 4″ tips
Regular Price:
$1,699.00
Special Price
$1,495.00
Sale
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: |
ES-VW07-KITB |
Vehicle Model: |
A3, GOLF R, S3 |
Diameter [in]: |
3 |
Material: |
Stainless Steel |
Regular Price:
$1,000.00
Special Price
$880.00