.: R Models - CTS Turbo - IPE - Turbosmart - SuperPro - Genuine VW - P3 Cars - VW Central - Whiteline
- Plug and play compatability
- 400% stronger than the OE Diverter Valve
- Designed to handle boost pressure up to 30PSI
- Ideal for lightly modified vehicles
The Turbosmart Kompact EM Series combines world leading electronics and more than two decades of blow off valve technology for rapid response and unbeatable performance. The Turbosmart EM Series is a plug and play upgrade for OE electronic diverter valves that are prone to cracking under pressure. Featuring a patent-pending pressure control, the Turbosmart Kompact EM Series are faster than the OE unit and will not leak under pressure.
Features:
- Plumb Back
- Patent pending integrated pressure control
- Plug and play compatability
- Integrated proprietary high-temperature solenoid valve
- 400% stronger than the OE unit
At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow.
The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.
Product Details:
- Mandrel bent large bore 3.5" aluminum piping with black powder coating
- Coveted Laser etched //CTS Turbo logo
- 3.5" Reusable air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Sealed air box
- Bracketry to prevent rattling under engine torquing
- Billet SAI breather adapter and filter (Optional in drop down menu)
Fitment:
- 2014+ VW Golf (all models)
- 2014+ VW GTI
- 2014+ VW Golf R
- 2018+ Audi A3 (all models)
- 2018+ Audi S3
NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.
CONFIRM ON YOUR CAR BEFORE ORDERING!
Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
MK7 Golf/GTI/Golf R
8V Audi A3/S3
MK3 Audi TT/TT-S
Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket
This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.
Compatible with:
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Buy a set of 4 Now!
Sale
Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Buy a set of 4 Now!
Regular Price:
$196.00
Special Price
$189.00
Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
Sale
- Australian owned
- 100% Fitment Guarantee
- Genuine quality brands
Regular Price:
$229.00
Special Price
$146.70
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275