.: R Models - CTS Turbo - Flow Designs - Ingo Noak

The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.

This 90 degree silicon hose is the hose we use in our Audi A3, MK5 GTI, MK6 GTI/Golf R, Jetta and Beetle FMIC kits, if you need one we have replacements.

Not for MQB

CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.

Installation is very straight forward and only required basic hand tools:

Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.

Product Details:

•   Made in Canada from billet T6061 Aluminum
•   Hard anodized black for stealth and longevity (machined finish shown)
•   Uses OEM O-ring
•   Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
•   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
•   Compatible with OEM Filter

The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.

This part replaces the OE part# 06D 115 408B and 07K 115 408.

Fitment:

• MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
• MK5 and MK6 Golf, Jetta 2.5 5-cylinder
• 8P Audi RS3 (not for facelift model)
• MK2 Audi TT-RS (not for facelift models)

This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5  intake kits.  These filters can also be used in a custom big turbo application.

Product Details:

3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp

Fitment:

• CTS-IT-270R or CTS-IT-270
• CTS-IT-290
• CTS-IT-300

VOLKSWAGEN MK6 GOLF R SIDE SPLITTERS V3 (PAIR)

Complete the aero stying of your VW MK6 Golf R with a pair of side splitters from Flow Designs - now including pre-pressed threaded brass inserts for quick install of accessories. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.

Details:

Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you.
We also have designed visual prompts so you know exactly where the splitter is meant to sit in relevance to the OEM side skirt.

The pre-installed brass thread is hidden from sight and will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. These can be viewed HERE.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept MK6 R adjustable side winglets (sold separately).

---

KIT INCLUDES:

• Side splitters (pair) with pre-pressed in threaded brass inserts (Side Winglets sold separately)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black 

Details:

Our goal was to create a kit that is discreet and stable without the use of any exposed hardware, it also must be easy to assemble, install and be flat-packable. 

Flow-Lock interlocking integral assembly system allows assembly of the diffuser fins without the need for tools or fasteners. With a simple "push and click" action, the kit is assembled and ready for installation.

No ugly “L-Brackets” no additional exposed hardware and no double-sided tape.
The final installation is only a matter of bolts and nuts, it is also possible to install on the ground.

A lot of thought has been put in to ensure you have a strong and reliable product that is easy to install also pleasing the eye.

---

KIT INCLUDES:

• Flow-Lock MK6 Golf R Rear Diffuser
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic 

Volkswagen MK6 Golf R Rear Spats V3 (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of rear spats from Flow Designs - now including pre-pressed threaded brass inserts for quick install of accessories. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Kit Includes: Rear spats (pair) with pre-pressed in threaded brass inserts (Rear Winglets sold separately) 2 Flow Designs stickers Fitting kit CNC engraved logo and features, hand polish and packed all in Melbourne's outer east. Material: 10mm thick polyethylene composite Finish: Hand polished satin black Bevelled edges Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.