.: R Models - CTS Turbo - IPE - Leyo Motorsport - Supernova - P3 Cars - Eibach - Flow Designs - INA
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 Sensors
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
Battery voltage (red wire / black wire - read through power and ground wires)
optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
Integrated display
Analog Box control unit
Main harness
Hard-wire harness
Analog boost sensor *boost tap not included
Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
3 zip ties
2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
DETAILS
The VW MK7 Golf R splitter set from Flow Designs includes a front splitter with Aerospacers, side splitters, rear spats & rear valance. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.
KIT INCLUDES
- MK7 Golf R rear aero valance
- MK7 Golf R rear pods/spats (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL
- 10mm thick polyethylene composite, bevelled edges
FINISH
- Hand polished satin black
DESCRIPTION
ORDER NOW TO RECEIVE A 10% DISCOUNT ACROSS OUR MK8 R RANGE
To celebrate the upcoming release of the latest Flow Designs kit for the MK8 Golf R, we are giving you this special opportunity to pre-order our full range of body enhancements with a special discounted price!
To be one of the first to have your MK8 R stand out from the crowd. For a limited time only simply select from our newly released product range NOW TO GET AN AUTOMATIC 10% DISCOUNT on your order)! So the more pieces of the Australian designed and made kit for your MK8 R you add to your order, the bigger your saving will be!
If this sounds like a great way to enhance the look of your MK8 R at an affordable price, jump across and search our complete range of front/side splitters, rear spats/diffusers and bolt on accessories for your MK8 R today. But hurry because this exclusive, never to be repeated offer is STRICTLY LIMITED TO THE FIRST 10 ORDERS RECEIVED.
Suits MK8 Golf R models
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
DETAILS:
Our adjustable rear spat winglets will bolt directly onto our MK8 Golf R rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats (sold seperately). Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
The MK8 Golf R body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Rear spats sold seperately
KIT INCLUDES:
MK8 Golf R Rear Spat Winglets (pair)
2 Flow Designs stickers
MATERIAL & FINISH:
4.5mm thick ABS plastic
Scratch resistant textured ABS plastic
CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3. The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors. Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage. Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.
Made in Canada from billet T6061 Aluminum
Hard anodized black for stealth and longevity
Uses OEM O-ring
OE-style threads are precision made to fit the transmission just like factory part. Other manufacturers do NOT make this thread.
Compatible with OEM Filter
Replaces factory part 02E305045
The CTS B-Cool Billet 01E DSG Oil Filter Housing fits Audi, VW, SEAT, and SKODA models equipped with DSG Transmissions (except B8 S4).
Designed with CAD software for precision fit
- Virtually eliminates wheel hop
- More consistent shifting for manual and DSG transmissions
- Minimum increase in NVH
- Includes grade 10.9 hardware for install
Our inserts are Made in USA using DuPont Adeprene urethane designed specifically for this application.
W MK5 Golf R32 Front Splitter + Pre Mounted Aero Spacers
Kit Includes
Splitter(s)
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
VW MK5 Golf R32 Side Splitter
Kit Includes
Splitter(s)
2 Flow Designs Stickers
Fitting kit
Material
10mm Thick Polyethylene Composite, Bevelled edges
Finish
HAND POLISHED SATIN BLACK
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Plug n Play, Error Free, Life time warranty.
New European cars come with LED license plate lights standard from factory for good reason. Not only are they more efficient, they provide a defined modern look. Update the exterior ambience of your vehicle to a crisp, 6000k pure white light with the plug n play Golf License Plate LEDs. Fits all VW Golfs 2005-2018 (MK5 Mk6 MK7). New updated variant, now with 24 month warranty.
Features
- Plug n Play
- Full housing replacement with inbuilt LEDs and canbus decoder
- 6000k Pure white
- Error Free, no VCDS coding needed.
- New revised design
- Life time warranty.
Fits all Mk5, MK6, MK7, MK7.5 Models, 2003-2019. TSI/TDI/GT/GTI/GTD/R/R32.
Sale
Whether your looking to save hundreds on highly priced dealer xenon globes or wanting more out of your xenon projector headlights, ATOM brings higher output, colour rendering index and colour temperature over traditional big brand xenon globes without the excessive price tag.
Regular Price:
$149.00
Special Price
$115.00