.: R Models - Forge Motorsports - Flow Designs

Product Description

Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.

This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak.

Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location.

The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products.

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB

 

In The Box:
1 x FMFSITVR Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x PCV Adaptor Kit
1 x Blue Spring (Uprated)
10 x Cable Ties
1 x 2000mm Length of 4mm Vac Hose
1 x Instruction Booklet
1 x Forge Keyring and Sticker

If you are unsure if this product is suitable for your application, please contact us.

VOLKSWAGEN MK6 GOLF R SIDE SPLITTERS V3 (PAIR)

Complete the aero stying of your VW MK6 Golf R with a pair of side splitters from Flow Designs - now including pre-pressed threaded brass inserts for quick install of accessories. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.

Details:

Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you.
We also have designed visual prompts so you know exactly where the splitter is meant to sit in relevance to the OEM side skirt.

The pre-installed brass thread is hidden from sight and will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. These can be viewed HERE.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept MK6 R adjustable side winglets (sold separately).

---

KIT INCLUDES:

• Side splitters (pair) with pre-pressed in threaded brass inserts (Side Winglets sold separately)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black 

Details:

Our goal was to create a kit that is discreet and stable without the use of any exposed hardware, it also must be easy to assemble, install and be flat-packable. 

Flow-Lock interlocking integral assembly system allows assembly of the diffuser fins without the need for tools or fasteners. With a simple "push and click" action, the kit is assembled and ready for installation.

No ugly “L-Brackets” no additional exposed hardware and no double-sided tape.
The final installation is only a matter of bolts and nuts, it is also possible to install on the ground.

A lot of thought has been put in to ensure you have a strong and reliable product that is easy to install also pleasing the eye.

---

KIT INCLUDES:

• Flow-Lock MK6 Golf R Rear Diffuser
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic 

Volkswagen MK6 Golf R Rear Spats V3 (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of rear spats from Flow Designs - now including pre-pressed threaded brass inserts for quick install of accessories. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Kit Includes: Rear spats (pair) with pre-pressed in threaded brass inserts (Rear Winglets sold separately) 2 Flow Designs stickers Fitting kit CNC engraved logo and features, hand polish and packed all in Melbourne's outer east. Material: 10mm thick polyethylene composite Finish: Hand polished satin black Bevelled edges Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Volkswagen MK6 Golf R Front Winglets (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of front winglets from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Our Adjustable Front Winglets will directly bolt onto our MK6R front splitter thanks to the pre-pressed in threaded brass fittings install into the splitter. Our fitting kit will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm VW MK6 Golf R Front Winglets are compatible with Flow Designs MK6R front splitter only which is designed to be an adjustable direct bolt-on accessory. Splitter and Front Extensions sold separately. Kit Includes: Adjustable front winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick textured ABS Finish: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

Volkswagen MK6 Golf R Front Extensions (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of front extensions from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Our Adjustable Front Extensions will directly bolt onto our MK6R front splitter thanks to the pre-pressed in threaded brass fittings install into the splitter. Our fitting kit will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm VW MK6 Golf R Front Extensions are compatible with Flow Designs MK6R front splitter only which is designed to be an adjustable direct bolt-on accessory. Splitter and Front Extensions sold separately. Kit Includes: Adjustable front extensions (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick textured ABS Finish: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

Volkswagen MK6 Golf R Side Winglets (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of side winglets from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Our Adjustable Side Winglets will directly bolt onto our MK6R side splitters thanks to the pre-pressed in threaded brass fittings install into the splitter. Our fitting kit will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm VW MK6 Golf R Side Winglets are compatible with Flow Designs MK6R side splitters only which is designed to be an adjustable direct bolt-on accessory. Side Splitters sold separately. Kit Includes: Adjustable side winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick textured ABS Finish: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

Volkswagen MK6 Golf R Rear Winglets (Pair) Details: Complete the aero stying of your VW MK6 Golf R with a pair of rear winglets from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong. Our Adjustable Rear Winglets will directly bolt onto our MK6R rear spats thanks to the pre-pressed in threaded brass fittings install into the splitter. Our fitting kit will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm VW MK6 Golf R Rear Winglets are compatible with Flow Designs MK6R side splitters only which is designed to be an adjustable direct bolt-on accessory. Rear Spats sold separately. Kit Includes: Adjustable rear winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick textured ABS Finish: Scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.