.: R Models - Integrated Engineering - Flow Designs - Autotech
Sale
PRODUCT DETAILS
IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)
The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.
Included:
- High-Gloss Carbon Fiber Intake Lid
PACKAGE CONTENTS:
- High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)
Get The Complete Carbon Fiber Intake Kit (See below):
This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.
IE Carbon Fiber Performance Cold Air Intake V2 For Audi/VW MQB MK7/8V - IEINCI11-KT
DISCONTINUED PART NUMBERS & V1 INTAKE:
With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.
- IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
- IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
- IEINCI3 -Carbon Fiber Inlet Pipe
| MAKE |
MODEL |
YEAR |
ENGINE(S) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular Price:
$699.00
Special Price
$659.95
Sale
MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES
Stage 1 & Stage 2 files available to match any level of bolt-on parts
Horsepower & torque gains maximized on stock engine & turbo
Switch between 91, 93, & 104 octanes at no extra cost
Stock boost control optimized for a smooth driving experience
Rev limiter increased to 7100 RPM in manual mode or with DSG flash
Quick and easy to tune your car at home
Launch control boost pressure increased for faster starts (DSG)
Increased rev limiters (transmission stock shift points remain)
Road speed limiters removed
All engine safety protocols remain for reliability and long engine life
POWERlink allows file and octane switching in less than 2 minutes
Engineered for all climates and elevations
Simple data logging for diagnosis purposes
Flash back to stock at any time
HOW TO IE TUNE YOUR 2.0T (IS38)
IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes!
WHAT DOES THE AUDI 2.0T ECU TUNE DO?
Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations.
AVAILABLE MK7/8V IS38 TUNES
Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available.
Stage 1 Low Torque recommended hardware
-IE Cold Air Intake (recommended)
Stage 1 High Torque required & recommended hardware
-IE DSG Transmission Tune (required)
-IE Cold Air Intake (recommended)
Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE DSG Transmission Tune (required)
-IE Intercooler (highly recommended)
-IE Cold Air Intake (highly recommended)
AVAILABLE OCTANES
All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump.
STAGE 1 OCTANES:
Pump 95
Pump 98
STAGE 2 OCTANES:
Pump 95
Pump 98
Race Fuel 108
EASY INSTALLATION – TUNE FROM HOME
IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
Regular Price:
$929.00
Special Price
$836.00
LEADING FEATURES
- Required for IE TrueFlex MQB tunes
- Allows for instant adjustments from 91 pump to full E85
- Harness for VW MK7 & Audi 8V EA888.3 engines
- Sends sensor data in real-time to IE ECU calibrations
- Includes everything needed to install
OVERVIEW
This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.
Kit includes:
- (1x) IE TrueFlex Wiring Harness
- (1x) 2 amp Fuse
- (1x) Ethanol Sensor
- (2x) Ethanol Sensor Quick Connect Couplers
- (2x) Hose Clamps
INSTALLATION
This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.
TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!
UPGRADE YOUR PIPES
This charge pipe upgrade Kit for 2.0T and 1.8T MK7/8V TSI engines includes two quality silicone intercooler inlet/outlet hoses and four high-strength band clamps for a direct installation. These hoses are a direct replacement for both IE FDS V2 Intercoolers and the stock factory equipped intercooler. Your new charge pipes feature a flow maximized design with no restrictions for optimized airflow.
Manufactured from multi-ply reinforced silicone for long-life and reliability against expansion or stretching under extreme boost pressures from upgraded turbos and tunes. The ends are molded with a inner flat edge that creates a stop for a perfect and easy no-fuss install and increased reliability against hoses popping off or leaking.
INCLUDES
- (1) Inlet silicone charge pipe
- (1) Outlet silicone charge pipe
- (4) Band clamps
FEATURES
- Fits with IE and Stock intercoolers
- Direct bolt-on fitment
- Smooth airflow transitions
- Multi-ply reinforced silicone hoses
- Internal stops for easy and perfect install
DETAILS
Protect your bumper from scrapes or kerbing with our MK7 Golf R front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK7 Golf R front extensions and MK7 Golf R front winglets sold separately.
KIT INCLUDES
- MK7 Golf R front lip splitter
- Pre-mounted adjustable Aerospacers
- Stainless steel crossbar mounts (pair: left & right)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
DETAILS
Protect your body work from scrapes or kerbing with our MK7 Golf R side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Installation is simple with pre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.
We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf R chassis.
The pre-installed brass thread allow for installation of our MK7 Golf R adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters.
KIT INCLUDES
- MK7 Golf R side skirt splitters (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
VW MK7 Golf R Rear Valance & Flow-Lock Diffuser Fins
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All new diffuser fins featuring Flow-Lock interlocking integral assembly system allows installation without the need of tools or fasteners.
No more double sided tape, nuts, bolts and "L" brackets.
Strong, secure, easy installation.
This part is only compatible with our new VW MK7R kit.
Read More
Kit Includes:
3x Flow-Lock Diffuser Fins (Left, Middle Right)
Centre Valance with Flow-Lock channels
2 Flow Designs Stickers
Fitting kit
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic
Rear Spats sold separately.
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
VW MK7 Golf R Rear Valance & Fairing
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Kit Includes:
Centre Valance & Fairing
2 Flow Designs Stickers
Fitting kit
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Finish:
Valance: Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
DETAILS
Protect your body work from scrapes or kerbing with our MK7 Golf R rear bumper spats/pods! All products in our core range are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
The pre-installed brass thread allow for installation of our MK7 Golf R adjustable rear winglets which are sold separately as a bolt-on accessory to suit our rear spats/pods.
KIT INCLUDES
- Rear spats/pods (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
DETAILS
Our adjustable front lip splitters extensions will bolt directly onto our MK7 Golf R front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
The MK7 Golf R front splitter extensions are only compatible with Flow Designs MK7 R front lip splitter - designed to be an adjustable direct bolt-on accessory.
MK7 Golf R front lip splitter and MK7 Golf R front winglets sold separately.
KIT INCLUDES
- Adjustable front extensions (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH
- 4.5mm thick textured ABS
- Scratch resistant textured ABS plastic
