Currently Shopping by
-
Brands:
New South Performance
P3 Cars
XFORCE
- Filter By Custom Stock Status
- Filter By performance
- Filter By Brands
- Filter By Price
- -
MK6 Golf R (2010-2014) - New South Performance - XFORCE - P3 Cars
Mk5/Mk6 ConsolePod
The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console. Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver. The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.Regular Price: $75.00
Special Price $45.00
XFORCE - VW Golf R MK6 Cat Back System with Varex Rear Muffler
FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tipsRegular Price: $1,699.00
Special Price $1,495.00
XFORCE - VW GOLF MK6 R / AUDI S3 8P - 3" STAINLESS STEEL DUMP PIPE & CAT
Description
3.5″ to 3" Dump pipe, to OEM cat back with 100 cell metallic cat in Stainless Steel
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reduced to 3″
- Flex bellows before hanger
- 100 cell high flow performance catalytic converter
- Designed to fit to factory cat back systems
- Requires ECU tuning
Fits the following;
- Audi 8P S3
- Audi 8P A3 2.0T
- Golf MK6 R
Part No: ES-VW07-KITB Vehicle Model: A3, GOLF R, S3 Diameter [in]: 3 Material: Stainless Steel Regular Price: $1,000.00
Special Price $880.00
XFORCE - VW Golf R MK6 R Full Turbo Back Exhaust System with Varex Rear Muffler
FEATURES; Polished stainless steel 3″ pipe work Straight through sports muffler Varex Muffler with twin outlet Twin 4″ tips DUMP-PIPE & CAT KIT 3" Stainless Steel Dump Pipe and 100-cel CatRegular Price: $2,600.00
Special Price $2,288.00
XFORCE - VW GOLF R MK6 (10/2009-08/2013) Turbo Exhaust Downpipe With Hi-Flow Racing Catalytic Converter (Fit XFORCE Cat-back System Only)
Description
3.5″ to 3" Dump pipe with 100 cell metallic cat in stainless steel fits to Xforce cat back system
Features
This aftermarket downpipe replaces the factory exhaust pipe, unlocking the full potential of your Audi 8P S3, Audi 8P A3 2.0T & Golf MK6 R engine. The Xforce Downpipe is expertly crafted from high-quality stainless steel to ensure a perfect fit and maximum durability.
The increased exhaust flow from the Xforce Downpipe will allow for improved horsepower and torque, giving you a more exhilarating driving experience. The mandrel-bent design and high-flow catalytic converter provide maximum exhaust flow and minimize back pressure, allowing your engine to breathe freely and reach its full potential. While exclusively working with an Xforce cat back system.
Upgrade your vehicle with the Xforce Downpipe and experience the ultimate in performance.
- 3.5″ dump pipe reducing to 3″
- Flex bellows before hanger
- 100 cell high flow cat
- 3″ connector pipe with resonator
- Fits to Xforce cat back system
Regular Price: $1,100.00
Special Price $970.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK6 Golf R
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Right Hand Drive MK6 Golf RRegular Price: $594.00
Special Price $534.60
P3 Cars Analog Gauge - VW Mk6 R (2009-2013)
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs. 4 Available Analog Readouts Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included Analog input 1 (brown wire - can read any 0-5 volt linear output sensor) Analog input 2 (blue wire - can read any 0-5 volt linear output sensor) Battery voltage (red wire / black wire - read through power and ground wires) optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on) OEM Vent Option We install the display in an OEM vent for your vehicle to make your install even easier. Analog gauge base kit includes Integrated display Analog Box control unit Main harness Hard-wire harness Analog boost sensor *boost tap not included Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end 3 zip ties 2 scotchlok wire taps Questions? Check out our P3 Analog Gauge install/config page for details.$399.00
SAFE & SECURE SHOPPING
