MK7.5 Golf R (2017+) - Forge Motorsports - OSIR - Flow Designs

Product Description

This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C

Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R

This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!

This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

In The Box:
1 x FMDVMK7R Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

⭐  Easy installation and sounds fantastic! Money well spent ⭐

In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

 

DETAILS

The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance with Diffuser Fins, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you. We've implemented visual prompts in our design so you know exactly where the splitter is meant to line up with the OEM side skirt.

The pre-installed brass thread is hidden from sight and will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. 

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept MK7.5 Golf R adjustable side winglets (sold separately).

---

VOLKSWAGEN MK7.5 GOLF R SIDE SKIRT SPLITTER KIT INCLUDES:

• Side skirt splitters (pair) with pre-pressed threaded brass inserts
• x2 Flow Designs Stickers
• Fitting kit

VOLKSWAGEN MK7.5 GOLF R SIDE SKIRT SPLITTER MATERIAL & FINISH:

• Side splitter: 10mm thick polyethylene composite
• Hand polished satin black
• Bevelled edges
• CNC engraved logo and features

DETAILS

The Flow Designs splitter set is the best exterior mod for your Volkswagen MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our goal was to create a kit that is discreet and stable without the use of any exposed hardware, it also must be easy to assemble, install and be flat-packable. 

Flow-Lock interlocking integral assembly system allows assembly of the diffuser fins without the need for tools or fasteners. With a simple "push and click" action, the kit is assembled and ready for installation.

No ugly L-brackets, no additional exposed hardware and no double-sided tape.
The final installation is a matter of bolts and nuts, it is also possible to install on the ground. A lot of research and development has been put in to ensure you have a strong and reliable product that is easy to install also pleasing the eye.

The rear valance and diffuser fins will clear the Volkswagen MK7.5 Golf R dual exhaust tips and rear bumper removal is not necessary for installation of the diffuser. 10 year warranty applies for the rear valance (excludes ABS fins).

Rear spats are sold separately.

---

VOLKSWAGEN MK7.5 GOLF R REAR DIFFUSER KIT INCLUDES:

• Volkswagen MK7.5 Golf R rear diffuser (rear valance and Flow-Lock diffuser fins)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7.5 GOLF R REAR DIFFUSER MATERIAL & FINISH:

• Valance: 10mm thick polyethylene composite, bevelled edges
• Flow-Lock diffuser fins: 4.5mm thick textured ABS 
• Valance: Hand polished satin black
• Flow-Lock diffuser fins: scratch resistant textured ABS plastic
• CNC engraved logo and features
  
  

Volkswagen MK7.5 Golf R Front Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf R Front Winglets are only compatible with Flow Designs MK7.5 R front splitter only which is designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Can also be used in conjunction with MK7.5 Golf R front extensions (sold separately). Kit Includes: Front winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf R Adjustable Front Splitter Extensions (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Our Adjustable Front extension will directly bolt onto our MK7.5 R Front splitter thanks to the Pre-Pressed in threaded brass fittings install int the splitter. Our fitting hard will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm VW MK7.5 Golf GTI Front Extensions are only compatible with Flow Designs MK7.5 GTI front splitter only which is designed to be an adjustable direct bolt-on accessory. Other accessories not included. Splitter sold separately. Kit Includes: MK7.5 Golf R Adjustable Front Extensions (Pair) 2 Flow Designs Stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf R Side Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf R side winglets are only compatible with Flow Designs MK7.5 R side splitter only which is designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm. Kit Includes: Side winglets (pair) 2 Flow Designs stickers Fitting kit Side splitter is not included Material: 4.5mm thick ABS Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf GTI/R Adjustable Rear Spat Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI & R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf GTI/R Rear Winglets are only compatible with Flow Designs MK7.5 GTI/R rear spats only which are designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm. Kit Includes: Adjustable Rear Spat Winglets (Pair) 2 Flow Designs Stickers Fitting kit *** Rear spats are not included *** Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic Fits Models: VW MK7.5 Golf GTI 3 Door VW MK7.5 Golf GTI 5 Door VW MK7.5 Golf R 3 Door VW MK7.5 Golf R 5 Door

Volkswagen MK7.5 Golf GTI/R Rear Spats (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI/R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Kit Includes: Rear Spats (1 x Pair) Flow-Lock Fins (Pair) 2 Flow Designs Stickers Fitting kit Fits Models: VW MK7.5 Golf GTI 3 Door VW MK7.5 Golf GTI 5 Door VW MK7.5 Golf R 3 Door VW MK7.5 Golf R 5 Door Material: Spat: 10mm thick polyethylene composite, bevelled edges Flow-Lock Fins: 4.5mm thick ABS plastic Finish: Spat: Hand polished satin black Flow-Lock Fins: Scratch resistant textured ABS plastic Accessories not included Volkswagen MK7.5 Golf GTI/R Adjustable Rear Spat Winglets (Pair) Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.