- Gain over 10+ horsepower and torque with tuning
- Available with optional high gloss carbon fiber lid
- Adds aggressive motorsport turbo and engine sound
- Full-width air inlet spans entire radiator support
- High-flow built in velocity stack & 5″ air filter
- 3.5″ turbo inlet pipe and silicone – removes factory restrictions
- Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
- Through-flow flat surface 3-ply couplers
- Perfect fitment by utilizing factory airbox mounts
- Black powder coated inlet pipe and heat shield
- Stealth coolant line included at no extra cost
- Works with/without SAI – no need to buy an extra kit
MK7.5 Golf R (2017+)
IE Turbo Outlet Muffler Delete for VW MK7/MK7.5 & Audi 8V/8S 2.0T Engines
Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI$249.00
IE Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.TURBO INLET PIPE FEATURES
- Greatly improves air-flow to turbocharger
- Constant high-flow inner diameter
- Easy install, no modifications necessary
- Long life cast aluminum alloy
- In-house CNC machined for perfect fitment
- No leak o ring seal to turbocharger
- Outflows stock inlet by 110CFM
IS YOUR STOCK INLET ROBBING POWER?
The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades.
UPGRADE YOUR TURBO INLET PIPE
The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.
HORSEPOWER RESULTS
Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane
EASY INSTALLATION
Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.VEHICLE APPLICATIONS
- Audi - A3 2015+ 8V 1.8T & 2.0T engines
- Audi - S3 2015+ 8V 2.0T engine
- Audi - TT 2016+ 8S 2.0T engine
- Audi - TTS 2016+ 8S 2.0T engine
- VW - Golf R 2015+ MK7 2.0T engine
- VW - GTI 2015+ MK7 2.0T engine
- VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
- VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
- VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine
Regular Price: $225.00
Special Price $219.95
IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
LEADING FEATURES
PRODUCT DETAILS
We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:
POWER GAINS
On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.
MODULAR DESIGN
At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.
PERFECT FITMENT & APPEARANCE
IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.
FULLY INCLUSIVE KIT
Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.
MOTORSPORT PERFORMANCE & SOUND
Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE(S) VW
GTI
MK7-MK7.5 2015-2019
2.0T
VW
Golf R
MK7-MK7.5 2015-2019
2.0T
VW
Golf
MK7-MK7.5 2015-2019
2.0T & 1.8T
VW
GLI
MK7 2019
2.0T
VW
Golf Alltrak
MK7-MK7.5 2015-2019
2.0T & 1.8T
Audi
A3
8V 2015-2019
2.0T & 1.8T
Audi
S3
8V 2015-2019
2.0T
Regular Price: $1,498.00
Special Price $1,299.00
IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
PRODUCT DETAILS
IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)
The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.
Included:- High-Gloss Carbon Fiber Intake Lid
PACKAGE CONTENTS:
- High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)
Get The Complete Carbon Fiber Intake Kit (See below):
This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.
IE Carbon Fiber Performance Cold Air Intake V2 For Audi/VW MQB MK7/8V - IEINCI11-KT
DISCONTINUED PART NUMBERS & V1 INTAKE:
With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.- IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
- IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
- IEINCI3 -Carbon Fiber Inlet Pipe
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE(S) VW
GTI
MK7-MK7.5 2015-2019
2.0T
VW
Golf R
MK7-MK7.5 2015-2019
2.0T
VW
Golf
MK7-MK7.5 2015-2019
2.0T & 1.8T
VW
GLI
MK7 2019
2.0T
VW
Golf Alltrak
MK7-MK7.5 2015-2019
2.0T & 1.8T
Audi
A3
8V 2015-2019
2.0T & 1.8T
Audi
S3
8V 2015-2019
2.0T
Regular Price: $699.00
Special Price $659.95
BFI MK7 Torque Arm Insert – Stage 1 – Type 2
MK7 Golf/GTI/Golf R 8V Audi A3/S3 MK3 Audi TT/TT-S$79.95
Flow Designs - MK7.5 Golf R Full Lip Splitter Set with Flow-Lock Rear Diffuser
DETAILS:
Please note you are receiving a special price when you purchase the MK7.5 R complete splitter set. Please select your choice of WITHOUT accessories or WITH all accessories in the MK7.5 R range.
- Option 1 includes all items in the set with the rear valance and fairing.
- Option 2 (currently selected) includes all the items in the set with the rear valance and Flow-Lock diffuser fins.
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Front, side, rear spats and all accessories included + rear valance & Flow-Lock diffuser fins.
KIT INCLUDES:- Front splitter & Aerospacers
- Cross bar drilling template (for stud installation)
- Side Splitters (Pair)
- MK7.5 Golf Rear Diffuser
- Rear spats (Pair)
- WITH all accessories package: Adjustable front extensions (Pair)
- WITH all accessories package: Adjustable front winglets (Pair)
- WITH all accessories package: Adjustable side winglets (Pair)
- WITH all accessories package: Adjustable rear winglets (Pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL:
- Front splitter, side splitters, valance, rear spats: 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
- Flow-Lock fins and rear fairing: scratch resistant textured ABS plastic
- CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
$1,648.00
Flow Designs - VW MK7.5 Golf R Side Splitter
DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
KIT INCLUDES:
- Splitter(s)
- Pre-mounted Adjustable Aero Spacers
- 2 Flow Designs Stickers
- Fitting kit
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
$429.00
LEYO - BRAKE FLUID RESERVOIR CAP - Black
Description:
Get the latest in performance aesthetics with Leyo Motorsports light weight aluminium engine fluid caps. Made from the finest raw materials, these fluid caps will add that clean modified look to your engine bay without the messy installation. Designed in-house by our technical team, these caps are built to perfection to seamlessly integrate with your vehicle engine bay.We offer four unique caps for the oil filler neck, the coolant reservoir, the brake fluid reservoir and finally the windshield washer tank. Changing these under the bonnet will add that unique personal touch and create an engine bay you’d be proud to show off with the confidence of performing better than the OEM parts. To make installation as simple as possible, we’ve included an Allen Set screw wrench for your new aluminium engine compartment oil caps.
Don’t wait, get the stylish appearance your car deserves from Leyo Motorsport today.
Specifications:
- Constructed from T6061 Billet Aluminium for strength.
- Hard coated anodized finish.
- Visual improvements to the engine bay
Available for all accessory cap looks like this.
BRAKE FLUID RESERVOIR CAP
$85.00
LEYO AIR Cold Air Intake System V2
Description:
This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance
This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.
Installation is simple and straight forward, no fabrication required.
Specifications:
-
OEM fitment requires no fabrication.
-
3.5’inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Open or closed intake design.
$719.99-
LEYO Clear Paddle Shift Extension
Description:
We take our most popular extension to date, throw in some innovation, throw in some creativity and voilà, honey I’ve vanished my paddle extension!
A world first, paddle shift extension that is transparent. See your dashboard unobstructed through the clear extension as well as the glow of the cabin lighting and you might for a split second think they are not even there.
Clear your mind as you blast down the racetrack; Clear your thoughts as you cruise along the coastline; Clear the clutter in front of you, Clear Extension, a first by Leyo Motorsport.
Specifications:
- The ultimate addition to your performance vehicle.
- Futuristic see-through design.
- Patented design (Pending).
- Direct OEM bolt-on. Clips right over existing paddle shifters.
- Scratch free for your factory paddle.
$69.99
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
