Volkswagen MK7 Golf R Front Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7 Golf R Front Winglets are only compatible with Flow Designs MK7 R front splitter only which is designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 5mm - 20mm on each side increasing the overall width up to 40mm. Can also be used in conjunction with MK7 Golf R front extensions (sold separately). Kit Includes: Front winglets (pair) 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

DETAILS

Our adjustable side skirt splitter winglets will bolt directly onto our MK7 Golf R side skirt splitters thanks to the pre-pressed in threaded brass fittings on our side skirt splitters. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The MK7 Golf R side skirt splitter winglets are only compatible with Flow Designs MK7 R side skirt splitters - designed to be an adjustable direct bolt-on accessory. 

MK7 Golf R side skirt splitter sold separately. 

---

KIT INCLUDES

• Adjustable side skirt splitter winglets (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

DETAILS

Our adjustable rear spat winglets will bolt directly onto our MK7 Golf R rear spats/pods thanks to the pre-pressed in threaded brass fittings on our rear spats/pods. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!

The MK7 Golf R rear winglets are only compatible with Flow Designs MK7 R rear spats/pods - designed to be an adjustable direct bolt-on accessory. 

MK7 Golf R rear spats/pods sold separately. 

---

KIT INCLUDES:

• Adjustable rear winglets (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH:

• 4.5mm thick textured ABS 
• Scratch resistant textured ABS plastic

DETAILS

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

MK7 Golf R front lip splitter sold separately.

---

KIT INCLUDES

• Stainless steel crossbar mounts (pair: left & right)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• Stainless steel

FINISH

• CNC engraved logo and features

Product Description

This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38

On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.

Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

MK7 GOLF R FULL LIP SPLITTER SET

Package price for this set includes:

• MK7 Golf R front lip splitter V3
• MK7 Golf R side skirt splitters V3
• MK7 Golf R rear lip spats/pods V3
• MK7 Golf R Flow-Lock rear diffuser OR rear aero valance (please select)
• Please select your choice of WITHOUT accessories or WITH all accessories in the MK7 R range (front extensions, front winglets, side winglets, rear winglets)

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

H&R Sport Springs - Volkswagen Golf R Wagon (MK7) Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany. Features: Lowers the center of gravity Reduces body roll Reduces wheel gap Lower wind resistance Front Drop: 25mm Rear Drop: 25mm