IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)
The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.
Included:
High-Gloss Carbon Fiber Intake Lid
PACKAGE CONTENTS:
High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)
Get The Complete Carbon Fiber Intake Kit (See below):
This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.
With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.
This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
MK7 Golf R Flow-Lock rear diffuser OR rear aero valance (please select)
Please select your choice of WITHOUT accessories or WITH all accessories in the MK7 R range (front extensions, front winglets, side winglets, rear winglets)
MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES
Stage 1 & Stage 2 files available to match any level of bolt-on parts
Horsepower & torque gains maximized on stock engine & turbo
Switch between 91, 93, & 104 octanes at no extra cost
Stock boost control optimized for a smooth driving experience
Rev limiter increased to 7100 RPM in manual mode or with DSG flash
Quick and easy to tune your car at home
Launch control boost pressure increased for faster starts (DSG)
Increased rev limiters (transmission stock shift points remain)
Road speed limiters removed
All engine safety protocols remain for reliability and long engine life
POWERlink allows file and octane switching in less than 2 minutes
Engineered for all climates and elevations
Simple data logging for diagnosis purposes
Flash back to stock at any time
HOW TO IE TUNE YOUR 2.0T (IS38)
IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes!
WHAT DOES THE AUDI 2.0T ECU TUNE DO?
Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations.
AVAILABLE MK7/8V IS38 TUNES
Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available.
Stage 1 Low Torque recommended hardware
-IE Cold Air Intake (recommended)
Stage 1 High Torque required & recommended hardware
-IE DSG Transmission Tune (required)
-IE Cold Air Intake (recommended)
Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE DSG Transmission Tune (required)
-IE Intercooler (highly recommended)
-IE Cold Air Intake (highly recommended)
AVAILABLE OCTANES
All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump.
STAGE 1 OCTANES:
Pump 95
Pump 98
STAGE 2 OCTANES:
Pump 95
Pump 98
Race Fuel 108
EASY INSTALLATION – TUNE FROM HOME
IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it shouldnot be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
T4
T5
T25
The Garrett GTX28 and GTX30 Range
Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C · Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C · Radiant Heat Limit: 2500°F/1371°C
FAQ
HOW IS YOUR SPLITTER SO STRONG?
Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
WHAT ABOUT CARBON FIBRE?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
USE OF ABS PLASTIC
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Please note you are receiving a special price when you purchase the MK7 R complete body kit splitter set.
Please select the rear option you want in your kit: Flow-Lock rear diffuser or rear aero valance
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
KIT INCLUDES
V3 front lip splitter & Aerospacers
Stainless steel crossbar mounts (pair: left & right)
V3 side skirt splitters (pair)
Flow-Lock rear diffuser OR Rear aero valance & fairing
V3 rear lip spats/pods (pair)
WITH all accessories package:Adjustable front extensions (pair)
WITH all accessories package:Adjustable front winglets (Pair)
WITH all accessories package:Adjustable side winglets (Pair)
WITH all accessories package:Adjustable rear winglets (Pair)
2 Flow Designs stickers
Fitting kit
MATERIAL & FINISH
Front lip splitter, side skirt splitters, rear aero valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
Hand polished satin black
Flow-Lock diffuser fins OR rear fairing: scratch resistant textured ABS plastic
The Flow Designs splitter set is the best exterior mod for your Volkswagen MK7 Golf R! With front lip splitter, side skirt splitters & rear aero valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Please note you are receiving a special price when you purchase the Golf MK7 R Wagon complete body kit splitter set.
Please select the accessory option you want in your kit.
The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R Wagon! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.
10 year warranty included (warranty covers front splitter, side splitters, rear valance and rear spats - ABS accessories are not included).
Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
KIT INCLUDES
V3 front lip splitter & Aerospacers
Stainless steel crossbar mounts (pair: left & right)
V3 side skirt splitters (pair)
MK7 R Wagon rear aero valance & rear spats set
WITH all accessories package:Adjustable front extensions (pair)
WITH all accessories package:Adjustable front winglets (Pair)
WITH all accessories package:Adjustable side winglets (Pair)
2 Flow Designs stickers
Fitting kit
MATERIAL
Front lip splitter, side skirt splitters, rear aero valance, rear spats: 10mm thick polyethylene composite, bevelled edges
