This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
XForce is proud to announce our resonator delete kit for the MK7/MK7.5 Golf R and Audi 8V S3 platforms. Get all the benefits of using this resonator delete (based on factory Audi part) without the high price tag.
Features:
• Replaces the factory resonator on stock cat-back exhaust assembly with our high flow exhaust section.
• Adds a nice deep exhaust note without the need for replacing the entire exhaust system.
Genuine Volkswagen USB AUX Switch for CarPlay & Auto Android Adapter Plug Socket
This USB/AUX Adapter is designed for MIB 2 & MIB 2.5 Radio Control Units. This adapter is required for Pre-2016 Vehicles to allow CarPlay and Auto Android connectivity.
Experiencing Misfires on your car? Don't go OEM again! Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Experiencing Misfires on your car? Don't go OEM again! Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles
Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES
Stage 1 & Stage 2 files available to match any level of bolt-on parts
Horsepower & torque gains maximized on stock engine & turbo
Switch between 91, 93, & 104 octanes at no extra cost
Stock boost control optimized for a smooth driving experience
Rev limiter increased to 7100 RPM in manual mode or with DSG flash
Quick and easy to tune your car at home
Launch control boost pressure increased for faster starts (DSG)
Increased rev limiters (transmission stock shift points remain)
Road speed limiters removed
All engine safety protocols remain for reliability and long engine life
POWERlink allows file and octane switching in less than 2 minutes
Engineered for all climates and elevations
Simple data logging for diagnosis purposes
Flash back to stock at any time
HOW TO IE TUNE YOUR 2.0T (IS38)
IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes!
WHAT DOES THE AUDI 2.0T ECU TUNE DO?
Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations.
AVAILABLE MK7/8V IS38 TUNES
Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available.
Stage 1 Low Torque recommended hardware
-IE Cold Air Intake (recommended)
Stage 1 High Torque required & recommended hardware
-IE DSG Transmission Tune (required)
-IE Cold Air Intake (recommended)
Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE DSG Transmission Tune (required)
-IE Intercooler (highly recommended)
-IE Cold Air Intake (highly recommended)
AVAILABLE OCTANES
All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump.
STAGE 1 OCTANES:
Pump 95
Pump 98
STAGE 2 OCTANES:
Pump 95
Pump 98
Race Fuel 108
EASY INSTALLATION – TUNE FROM HOME
IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it shouldnot be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
T4
T5
T25
The Garrett GTX28 and GTX30 Range
Borg Warner EFR6258
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C · Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C · Radiant Heat Limit: 2500°F/1371°C
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
Complete brand new turbocharger; no need for core to be sent it or purchased
Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
Billet MHI-style TD06 compressor wheel
High performance 9 blade turbine wheel
Stainless steel turbine housing
VSR Balanced to exceed OE tolerances
Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
Compatible with OE or aftermarket turbo inlets and turbo outlets
Fitment:
2015+ VW Golf/Sportwagen/Alltrack
2015+ VW GTI
2015+ VW Golf R
2019+ VW Jetta GLI
2018+ VW Arteon
2015+ Audi A3
2015+ Audi S3
2015+ Audi TT
2015+ Audi TTS
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.