MK7 Golf R (2014+) - Leyo Motorsport - XFORCE - Genuine VW - VW Central - Flow Designs - Whiteline - Autotech

Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 4.1kg/mm (229lb/in) front rated springs that provide a 20mm drop while the 4.8kg/mm (269lb/in) rated rears deliver a desirable 20mm to the vehicle. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation match with Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.

Part No: ES-VW09-CHROME RRP: $200.00 Diameter [in]: 4 Material: Stainless Steel

https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

DETAILS

The Flow Designs splitter set is the best exterior mod for your Volkswagen MK7 Golf R! With front lip splitter, side skirt splitters & rear aero valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• MK7 Golf R rear aero valance
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• Aero valance: 10mm thick polyethylene composite, bevelled edges
• Fairing: 4.5mm thick textured ABS
• Aero valance: Hand polished satin black
• Fairing: scratch resistant textured ABS plastic

DETAILS

Please note you are receiving a special price when you purchase the Golf MK7 R Wagon complete body kit splitter set.

• Please select the accessory option you want in your kit.

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R Wagon! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

10 year warranty included (warranty covers front splitter, side splitters, rear valance and rear spats - ABS accessories are not included).

Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• V3 front lip splitter & Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• V3 side skirt splitters (pair)
• MK7 R Wagon rear aero valance & rear spats set
• WITH all accessories package: Adjustable front extensions (pair)
• WITH all accessories package: Adjustable front winglets (Pair)
• WITH all accessories package: Adjustable side winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• Front lip splitter, side skirt splitters, rear aero valance, rear spats: 10mm thick polyethylene composite, bevelled edges

FINISH

• Hand polished satin black
• CNC engraved logo and features

 

DETAILS

The VW MK7 Golf R splitter set from Flow Designs includes a front splitter with Aerospacers, side splitters, rear spats & rear valance. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.

---

KIT INCLUDES

• MK7 Golf R rear aero valance
• MK7 Golf R rear pods/spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• 10mm thick polyethylene composite, bevelled edges

FINISH

• Hand polished satin black

Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high performance street or track day weapon, providing improved tyre life and extra grip during high speed / high load cornering.