MK7 Golf R (2014+)

This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5  intake kits.  These filters can also be used in a custom big turbo application.

Product Details:

3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp

Fitment:

• CTS-IT-270R or CTS-IT-270
• CTS-IT-290
• CTS-IT-300

CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3.  The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors.  Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage.  Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.

DESCRIPTION

CTS Turbo is happy to release our high flow turbo outlet pipe kit for MQB vehicles equipped with BOSS V3 kits or hybrid turbochargers. This part is perfect to compliment the 2.5″ turbo outlet on the BOSS V3 kit, making the installation seamless.

The CTS Turbo 2.5″ high flow turbo outlet pipe kit replaces all the factory charge piping between the turbocharger compressor housing and intercooler.

Product Details:

• 2.5″ turbo outlet fitting
• 2.5″ Aluminum piping
• OEM style pipe bracket
• High quality tig welds
• Durable powdercoat finish
• Fits all MQB models with BOSS V3 kit or hybrid turbos.

Hardware Included:

• 2.5″ Silicone coupler
• Lower turbo outlet pipe
• 2.5″ turbo outlet fitting
• Hose clamps
• Installation hardware

Fitment:

•  VW Golf/AllTrack/Sportwagen 1.8TSI (2015 – 2020)
•  VW GTI (2015 – 2021)
•  VW Golf R (2015 – 2019)
•  Audi A3 (2015 – 2020)
•  Audi S3 (2015 – 2020)
• Audi TT/TT-S (2015-2020)
•  VW Jetta GLI (2019 – 2020)

Vehicle Fitment

Model

iPE Innotech revolutionizes the Hot-Hatch-Segment with an exhaust system completely made from stainless steel, for the new VW Golf R MK7.

This extremely durable, performance increasing and valve-controlled system brings your new Golf R more than only an exclusive touch.

Our premium-class exhaust system has larger pipes in diameter and an optimized exhaust flow, leading to more performance and improved torque and response.

The system comes standard with chrome silver tips. Different colour tips are available from the drop-down menu.

Please note if you have an MK7.5 Golf R - The link pipe to the muffler is different to the MK7 Golf R. 

DESCRIPTION

1.Improper adjustments made during installation may result in short-term to permanent damages to the iPE exhaust system and/or your vehicle.

iPE will not be held responsible for any damages to the vehicle, and warranties on our products will be voided if the damages occurred due to improper installation.If you have any trouble installing the system please contact your authorized dealer!



2. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the iPE exhaust system. When installing the iPE exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.



3. iPE makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the iPE exhaust system. The warranty is limited to defects recognized by our technical department and of normal use only, and excludes items subject to normal wear and tear(gaskets and damping wool). The warranty is voided in case of accidents, modifications, improper or competition uses.



*Actual product may vary due to product enhancement. iPE reserves the right to revise, change, explain the product.

*Cat Pipe/Cat-bypass Pipe ONLY fit with iPE Catback System

Autotech is the premier manufacturer of fuel pump upgrades for the FSI engine because our kit offers the highest quality, solid engineering, and great value. 

Upon installing the Volkswagen fuel pump, notable differences include 5% Horsepower & Torque increase on stock mapping.

Our HPFP kit continues to be the benchmark that imitators strive to reach. However, Autotech’s HPFP Kit is not easily duplicated. 

There are many reasons why Autotech’s Kit is superior. Here are a few: 

~Each piston (11.66mm) and cylinder in AutoTech High-Pressure Fuel Pump kit undergo high-precision grinding processes many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. Not the cheapest way to make them, but the best way.

~Each piston and cylinder are match-ground and serialized to ensure absolute precision and the utmost longevity.

~Autotech was the first to incorporate plasma DLC coating on HPFP components to reduce friction losses and increase performance. Others have tried to follow by adding a coating to their parts. However, the DLC process alone is not enough – it is not a cure for substandard precision – the parts must be engineered specifically for the process to take full advantage: Autotech’s are. The success we have in the field can attest to that.

Tuners trust Autotech’s HPFP in their conversions and upgrades because it works, and works well. 

Applications:
Audi - 8V A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
Audi - 8S TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI
Audi - TTRS 8S / RS3 8V (MK3) - EA888 Gen 3 
VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
VW - Jetta - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
Audi - S1 EA888 Gen 3 - 2.0 TFSI



Note: some 1.8 TSFI non-USA Market cars do not use this internal pump style (physically check for a hex-cap recess for our 103T tool) 

Also some 2.0T Jettas and Beetles with engine codes CPLA & CPPA do not use this internal pump style (sealed pump unit similar to MK6 GTI sorry)

Assembly tool required, part # 10-127-103T (see related parts above) 
103K/203K Install Instructions