https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

MK7 GOLF R FULL LIP SPLITTER SET

Package price for this set includes:

• MK7 Golf R front lip splitter V3
• MK7 Golf R side skirt splitters V3
• MK7 Golf R rear lip spats/pods V3
• MK7 Golf R Flow-Lock rear diffuser OR rear aero valance (please select)
• Please select your choice of WITHOUT accessories or WITH all accessories in the MK7 R range (front extensions, front winglets, side winglets, rear winglets)

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

FAQ HOW IS YOUR SPLITTER SO STRONG? Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper. WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!) WHAT ABOUT CARBON FIBRE? As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable. USE OF ABS PLASTIC Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

DETAILS

Please note you are receiving a special price when you purchase the MK7 R complete body kit splitter set.

• Please select the rear option you want in your kit: Flow-Lock rear diffuser or rear aero valance

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• V3 front lip splitter & Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• V3 side skirt splitters (pair)
• Flow-Lock rear diffuser OR Rear aero valance & fairing
• V3 rear lip spats/pods (pair)
• WITH all accessories package: Adjustable front extensions (pair)
• WITH all accessories package: Adjustable front winglets (Pair)
• WITH all accessories package: Adjustable side winglets (Pair)
• WITH all accessories package: Adjustable rear winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• Front lip splitter, side skirt splitters, rear aero valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• Flow-Lock diffuser fins OR rear fairing: scratch resistant textured ABS plastic
• CNC engraved logo and features

DETAILS

The Flow Designs splitter set is the best exterior mod for your Volkswagen MK7 Golf R! With front lip splitter, side skirt splitters & rear aero valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• MK7 Golf R rear aero valance
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• Aero valance: 10mm thick polyethylene composite, bevelled edges
• Fairing: 4.5mm thick textured ABS
• Aero valance: Hand polished satin black
• Fairing: scratch resistant textured ABS plastic

DETAILS

Please note you are receiving a special price when you purchase the Golf MK7 R Wagon complete body kit splitter set.

• Please select the accessory option you want in your kit.

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R Wagon! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

10 year warranty included (warranty covers front splitter, side splitters, rear valance and rear spats - ABS accessories are not included).

Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

---

KIT INCLUDES

• V3 front lip splitter & Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• V3 side skirt splitters (pair)
• MK7 R Wagon rear aero valance & rear spats set
• WITH all accessories package: Adjustable front extensions (pair)
• WITH all accessories package: Adjustable front winglets (Pair)
• WITH all accessories package: Adjustable side winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• Front lip splitter, side skirt splitters, rear aero valance, rear spats: 10mm thick polyethylene composite, bevelled edges

FINISH

• Hand polished satin black
• CNC engraved logo and features

 

DETAILS

The VW MK7 Golf R splitter set from Flow Designs includes a front splitter with Aerospacers, side splitters, rear spats & rear valance. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.

---

KIT INCLUDES

• MK7 Golf R rear aero valance
• MK7 Golf R rear pods/spats (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL

• 10mm thick polyethylene composite, bevelled edges

FINISH

• Hand polished satin black

Product Description

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

⭐ Excellent quality product & easy to fit ⭐

The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

As with all Forge products, this hose comes with a lifetime warranty*