Tiguan - CTS Turbo - IPE - IROAD - Integrated Engineering - T-carbon - P3 Cars - Eibach - Autotech
IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.
The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
- OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
- P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
- LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
- Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
For EA888.1 Gen 1 TSI models (2009-2013)
- Mandrel bent aluminum piping with black powder coating
- CNC machined MAP flange - DV relocation/noise pipe bung
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$548.00
Special Price
$493.00
Stop missing shifts and your friends will stop laughing at you.
Eliminate free-play and slop in your factory shifter bracket by replacing soft factory rubber bushings.
Keep your shifts crisp and smooth; and stay ahead of the pack!
Kit includes:
3 x shifter bracket bushings (upper and lower halfs)
This part fits the following transmissions:
MK3: 02A ONLY
MK4: 02J, 02M
MK5: 02Q
MK6: 02Q
MK7: 6MT
Sale
Regular Price:
$769.00
Special Price
$692.00
Audi |
TT |
MK2 (2008-2015) |
2.0 TSI |
Audi |
A3 |
8P (2009-2013) |
2.0 TSI (FWD) |
Volkswagen |
Tiguan |
(2009-2011) |
2.0 TSI |
Volkswagen |
Tiguan |
(2012+) |
2.0 TSI |
Volkswagen |
Jetta |
MK5 (2010) |
2.0 TSI |
Volkswagen |
Jetta |
MK6 Sedan (2011-2017) |
2.0T GLI |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2017) |
1.8TSI/2.0TSI |
Volkswagen
Volkswagen
|
Jetta
Golf/GTI/Rabbit
|
MK6 Sedan (2014-2017)
MK5 (2009)
|
1.8TSI/2.0T GLI
2.0 TSI
|
Volkswagen |
Golf/GTI/Rabbit |
MK6 (2010-2014) |
2.0T |
Volkswagen |
CC |
(2009+) |
2.0 TSI |
Volkswagen |
Beetle |
Beetle (2012+) |
2.0 TSI |
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$603.00
Special Price
$543.00
Sale
Large inside diameter for extremely high flow
Cast aluminum with CNC machined flanges
Compatible with any intake system, including stock
Durable aluminum construction, will not break like factory plastic part
Simple installation
Includes new o-ring
Faster turbo spool, more airflow, improved turbo sound!
Regular Price:
$189.00
Special Price
$179.00
Sale
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
TURBO INLET PIPE FEATURES
- Greatly improves air-flow to turbocharger
- Constant high-flow inner diameter
- Easy install, no modifications necessary
- Long life cast aluminum alloy
- In-house CNC machined for perfect fitment
- No leak o ring seal to turbocharger
- Outflows stock inlet by 110CFM
IS YOUR STOCK INLET ROBBING POWER?
The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades.
UPGRADE YOUR TURBO INLET PIPE
The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.
HORSEPOWER RESULTS
Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane
EASY INSTALLATION
Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.
VEHICLE APPLICATIONS
- Audi - A3 2015+ 8V 1.8T & 2.0T engines
- Audi - S3 2015+ 8V 2.0T engine
- Audi - TT 2016+ 8S 2.0T engine
- Audi - TTS 2016+ 8S 2.0T engine
- VW - Golf R 2015+ MK7 2.0T engine
- VW - GTI 2015+ MK7 2.0T engine
- VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
- VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
- VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine
Regular Price:
$225.00
Special Price
$219.95