Are you sick and tired of plugging your Apple iPhone into the USB port every time you get into your car.
At VW Central we have found the solution for factory fitted vehicles. Simply plug our USB adapter into the factory USB port and it will use Bluetooth to make a wireless connection with your vehicle.
Plug and Play. No coding required.
Please note this will not work if your vehicle doesn’t already have factory fitted CarPlay functionality.
Suitable for VW Vehicles 2016+
Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kitalso available)
OEM Integration - installs in your vent for a sleek install while retaining air flow
Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
Coolant temperature
Air/Fuel ratio (can be read in AFR or Lambda)
Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
Intake air temperature
Throttle angle
Ignition timing
Engine RPM
Exhaust gas temperature
Battery voltage
Programmable shift light
Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
Acceleration timers (0-60mph/0-100mph/60-130mph)
Braking timers (60-0mph/100-0mph)
OEM Vent Option
We install the display in an OEM vent to make your install even easier
Optional Add-Ons
P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Modernise your vehicle by upgrading the radio to an RCD330G+ with it's built in bluetooth, Apple CarPlay, Mirrorlink & Android Auto.
Compatibility:
MK5 2005+
MK6 including
Jetta (2007 - 2013)
EOS (2007 - 2013)
Polo 6R (2007 - 2013)
Scirocco R
Tiguan (2006- 2014)
Caddy (2006 - 2014)
Passat (2006 - 2014)
T5 Transporter
Take advantage of the latest CarPlay functionality by upgrading your iPhone to iOS 14.
Package Contents:
1 x RCD330G+ Radio (187B No Name)
1 x Antenna Adapter
1 x AV Camera Adapter
Tech Specs:
6.5" Touchscreen Display
Resolution 800 x 480
Video Input for the OEM Rear View Camera (Please note Genuine factory fitted reverse cameras will require RGBS to AV Converter)
AM / FM Radio with RDS
Slot for SD Card (Max 32GB)
USB Port for Apple CarPlay & Android Auto
AUX Input
Supports Factory OPS (Optical Parking System)
Supports Multi-Function Steering Wheel (Steering Wheel Adapter Harness will be required for MK5 Platform)
Built-In Bluetooth
Additional Information: Please note for vehicles prior to 2008, you will need to upgrade your CAN Gateway to prevent battery drain. Will NOT work on an VW Polo 6C MQB
Most commonly used to eliminate battery drain issues in Pre-2009 model Volkswagen cars when upgrading the radio to a later model such as the RNS510, RCD510 ,RCD330, RCD340 etc.
The Canbus Gateway Module, will require coding using software such as VCDS or OBDII.
Do it right the first time and only purchase a Genuine VW reverse camera.
This boot handle reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B.
Volkswagen Original Boot Lid Camera KIT Composite(AV) Output Compatible with:
* VW Golf MK6 Wagon (2010-2013)
* VW Tiguan 5N (2007 - 2014)
* VW Passat B6 & B7 (Wagon) (2005-2014)
* VW Jetta 1K & 5C (2005-2012)
See behind your car with a camera in your boot lid.
A camera at the back of your car shows you what's behind to make reversing safer and easier.
Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.
The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.
Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.
Compatible with head unit :
VW Genuine RCD330 / RCD340 - 6RD035187B
VW Genuine Discover Media
VW Genuine Discover Pro
Radiosystem: Composition Media
Not compatible with Composition Media radios with the following part numbers :
5G0035820
5G0035819
5G0035812
Please note: VAS / OBD11 / VCDS Coding is required after installation.
Professional Installation is recommended, we do not provide installation assistance for this product.
FAQ's
Does this camera work with the RCD330?
Yes! It certainly does, no delay timer or AV converter box required.
What is included in this kit?
The Genuine VW Handle Reverse Camera & Wiring Harness
Will this camera work with an RCD510/RNS510 or RNS315 Radio?
No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)

OBDeleven with 12 month PRO Plan OBDeleven becomes a professional diagnostic tool. Operating with easy to use application it allows to fully access all car systems, program, monitor and activate various functions via your iOS, Android, and Huawei devices.
Official and licensed full-featured software is constantly updated with new features. The programming temporarily is not supported on models that are manufactured from 2020 and have SFD protection. The negotiation regarding the support of these models is in progress.
Pack includes:
Next generation device
12 month PRO Plan
200 credits
Pro Plan and 200 credits will be sent to your email
Frequently Asked Questions:
Q. What vehicles are supported with One-Click-Apps by OBDeleven A. Please refer to OBDeleven Official Supported Vehicles Page
Q. Are OBDeleven credits included? A. Yes, the Pro Pack includes 200 Credits with the kit, and provides you with 12 months access on their PRO Plan
Q. What vehicles are supported with this device? A. Vehicles built after 1996 that are Audi, Volkswagen, Seat, Lamborghini, Bentley and Skoda models are supported.
Q. How do I know what tweaks or modifications I can code for my vehicle. A. We do not provide support with the coding and adaptation, there are many YouTube guides for VCDS & OBDeleven: Here is an example of someMK7 Coding and Adaptationavailable for your OBDeleven device Q. Does this product require an internet connection? A. Yes, an internet connection is required whilst using the OBDeleven device. We recommend having good reception and a strong signal to ensure a stable connection with their servers.
Q. If I require assistance with this product who do I contact? A. OBDeleven have a dedicatedsupport area
Q. Will any changes I do to my vehicle with OBDeleven have any effect on my factory vehicle warranty? A. Any form of modification may impact your warranty. VW Central will not take any responsibility for damage caused by using the OBDeleven device.
Q. Where do I find the OBDeleven App? A. The OBDeleven App is available on both the Apple App Store or for Android Users on the Google Play Store.
H&R Sport Sway Bars are crafted from a special 50CRV4 steel alloy, the highest tensile strength available.
The quality of the material and design guarantees smooth transitional sway bar function, decreasing feedback response time and increasing stiffness over stock.
H&R Sport Sway Bars improve lateral stability and cornering grip, while reducing body roll. H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase stiffness and reduce body roll while maintaining comfort and increasing cornering control, lateral stability, and grip.
A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness.
Being 100% German made means a commitment to doing it right and giving you the best quality product.
Features: - Reduces body roll - Highest tensile strength available - Works with DCC (adaptive suspension)
- Special urethane/Teflon composite bushes that are maintenance free
The P3 Analog Gauge*This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
Battery voltage (red wire / black wire - read through power and ground wires)
optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
OBD2 power/ground tap harnessallows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
P3 ESVA (ethanol sensor voltage adaptor)allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...
OEM Vent Option
We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
Integrated display
Analog Box control unit
Main harness
Hard-wire harness
Analog boost sensor *boost tap not included
Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end