IE Shifter Cable End Bushing Set for VW MK5 & MK6

PRODUCT FEATURES

Eliminates excessive play from OE rubber bushings
Greatly Reduces chances of missed shifts
CNC machined in-house for precise fitment
Bronze inner bushing to provide smooth pivoting without wear

PRODUCT DETAILS

Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!

Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.

FITMENT

VW - Golf R 2012-2012 (MK6) 6 speed transmisison
VW - GTI 2009 (MK5) 6 speed transmisison
VW - GTI 2010-2014 (MK6) 6 speed transmisison
VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
VW - Jetta 2008-2009 (MK5) 5 speed transmisison
VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison

$79.95

Out of stock

IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit

EXPLORE WITH CONFIDENCE

Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.

KIT DETAILS

This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.

KIT CONTENTS:

1X IE oiled 8 pleat density performance 5" filter
1X IE pre-filter intake sock
1X Air filter worm clamp

RECHARGING

As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.

COMPATIBLE INTAKES

Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.

IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta

$129.00

Out of stock

IE Intercooler Charge Pipes Upgrade Kit | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3

UPGRADE YOUR PIPES

This charge pipe upgrade Kit for 2.0T and 1.8T MK7/8V TSI engines includes two quality silicone intercooler inlet/outlet hoses and four high-strength band clamps for a direct installation. These hoses are a direct replacement for both IE FDS V2 Intercoolers and the stock factory equipped intercooler. Your new charge pipes feature a flow maximized design with no restrictions for optimized airflow.

Manufactured from multi-ply reinforced silicone for long-life and reliability against expansion or stretching under extreme boost pressures from upgraded turbos and tunes. The ends are molded with a inner flat edge that creates a stop for a perfect and easy no-fuss install and increased reliability against hoses popping off or leaking.

INCLUDES

(1) Inlet silicone charge pipe
(1) Outlet silicone charge pipe
(4) Band clamps

FEATURES

Fits with IE and Stock intercoolers
Direct bolt-on fitment
Smooth airflow transitions
Multi-ply reinforced silicone hoses
Internal stops for easy and perfect install

$229.95

Out of stock

IE TrueFlex Sensor Harness For MQB Engines | Fits VW MK7 & Audi 8V

LEADING FEATURES

Required for IE TrueFlex MQB tunes
Allows for instant adjustments from 91 pump to full E85
Harness for VW MK7 & Audi 8V EA888.3 engines
Sends sensor data in real-time to IE ECU calibrations
Includes everything needed to install

OVERVIEW

This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.

Kit includes:

(1x) IE TrueFlex Wiring Harness
(1x) 2 amp Fuse
(1x) Ethanol Sensor
(2x) Ethanol Sensor Quick Connect Couplers
(2x) Hose Clamps

INSTALLATION

This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.

TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!

$359.00

Out of stock

IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

DESCRIPTION

CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

Most Stage 2+ software tunes are compatible with this kit.

Product Details

Made in house at CTS Turbo in Canada
Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
OEM-spec honing and tolerances
Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
Nitride coated for long-lasting OEM looking finish
Includes belt and bolts required for install
Stock Size: 63.25mm, CTS Size: 57.3mm

Fitment:

2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
Late Audi Q7 with 3.0T SUPERCHARGED engine

$359.00

Add to Cart

IE Valve Spring & Retainer Kit For 2.0T FSI & TSI (Gen 1, 2, 3) | Fits VW MK5, MK6, MK7 & Audi B7, B8, 8P, 8J, 8V, 8S, C7

Sale

IE Valve Spring & Retainer Kit For 2.0T FSI & TSI (Gen 1, 2, 3) | Fits VW MK5, MK6, MK7 & Audi B7, B8, 8P, 8J, 8V, 8S, C7

IE ULTIMATE PERFORMANCE VALVE SPRING & RETAINER KIT FOR 2.0T TSI

This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.

LEADING FEATURES

Protects against engine failure from valve float
Safely increase your rev limit and power band
Nan-peened valve springs provide long life
In-house CNC machined retainers from titanium
Optimized design for all EA113/EA888 2.0T engines
Highest quality spring material available in the world
Torture tested in-house for high-power reliability

INCLUDED IN KIT

16 PRECISION WOUND INTAKE/EXHAUST VALVE SPRINGS
8 EXACT TOLERANCE TITANIUM INTAKE RETAINERS
8 EXACT TOLERANCE TITANIUM EXHAUST RETAINERS

WHY DO I NEED A SPRING & RETAINER KIT?

Increasing your engine's power output often comes with modifications that require more RPMs to get the most out of it, such as larger turbochargers, tuned intake manifolds, and high-output software tunes. Upgrading those components without changing out the valve springs can leave you with a short power band or cause valve float and other significant damage.

ONLY TRUST YOUR ENGINE TO THE BEST

Other cheap valve spring kits are often designed by simply finding a spring that is stiffer and will fit. Those are also not usually a good compromise because many times they are the wrong stiffness, and often poorly constructed. A broken valve spring can cause total engine failure and destroy everything that you have put hard work and money into. Our kits are the only spring and retainer kits on the market designed by someone with a working knowledge of the unique valvetrain in the VW & Audi EA113 FSI engines, and what the spring requirements actually are.

THE ULTIMATE SPRING & RETAINER KIT

Manufactured out of the best spring wire in the world IE valve springs use a patented multi-stage shot peening process that further reduces failure rates. Our titanium retainers are machined with an excellent surface finish and tight tolerance control for a long lifespan. Each application is thoroughly tested to perform on these engines right here in our test facility in Salt Lake City, Utah. Our spring and retainer kits are the best matched, most tested parts on the market. Purchasing a set will ensure that your engine runs at maximum performance and reliability.

Regular Price: $1,015.00

Special Price $985.00

Add to Cart

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

Sale

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

1Review(s)

PRODUCT DETAILS

IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)

The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.

Included:

High-Gloss Carbon Fiber Intake Lid

PACKAGE CONTENTS:

High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)

Get The Complete Carbon Fiber Intake Kit (See below):

This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.

IE Carbon Fiber Performance Cold Air Intake V2 For Audi/VW MQB MK7/8V - IEINCI11-KT

DISCONTINUED PART NUMBERS & V1 INTAKE:

With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.

IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
IEINCI3 -Carbon Fiber Inlet Pipe

VEHICLE FITMENT GUIDE

MAKE	MODEL	YEAR	ENGINE(S)
VW	GTI	MK7-MK7.5 2015-2019	2.0T
VW	Golf R	MK7-MK7.5 2015-2019	2.0T
VW	Golf	MK7-MK7.5 2015-2019	2.0T & 1.8T
VW	GLI	MK7 2019	2.0T
VW	Golf Alltrak	MK7-MK7.5 2015-2019	2.0T & 1.8T
Audi	A3	8V 2015-2019	2.0T & 1.8T
Audi	S3	8V 2015-2019	2.0T

Regular Price: $699.00

Special Price $659.95

Add to Cart

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

Sale

IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

3Review(s)

LEADING FEATURES

Gain over 10+ horsepower and torque with tuning
Available with optional high gloss carbon fiber lid
Adds aggressive motorsport turbo and engine sound
Full-width air inlet spans entire radiator support
High-flow built in velocity stack & 5″ air filter
3.5″ turbo inlet pipe and silicone – removes factory restrictions
Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
Through-flow flat surface 3-ply couplers
Perfect fitment by utilizing factory airbox mounts
Black powder coated inlet pipe and heat shield
Stealth coolant line included at no extra cost
Works with/without SAI – no need to buy an extra kit

PRODUCT DETAILS

We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:

POWER GAINS

On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.

MODULAR DESIGN

At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.

PERFECT FITMENT & APPEARANCE

IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.

FULLY INCLUSIVE KIT

Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.

MOTORSPORT PERFORMANCE & SOUND

Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.

VEHICLE FITMENT GUIDE

MAKE	MODEL	YEAR	ENGINE(S)
VW	GTI	MK7-MK7.5 2015-2019	2.0T
VW	Golf R	MK7-MK7.5 2015-2019	2.0T
VW	Golf	MK7-MK7.5 2015-2019	2.0T & 1.8T
VW	GLI	MK7 2019	2.0T
VW	Golf Alltrak	MK7-MK7.5 2015-2019	2.0T & 1.8T
Audi	A3	8V 2015-2019	2.0T & 1.8T
Audi	S3	8V 2015-2019	2.0T

Regular Price: $1,498.00

Special Price $1,299.00

Add to Cart

IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)

Sale

IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)

LEADING INTAKE FEATURES

Increased airflow - Get the most out of your upgrades
High-flow velocity stack - True performance design
Sealed heatshield - Separates cold air from engine bay heat
Perfect fitment - No modifications required to bolt-on
Amazing sound - Releases awesome turbo and engine noise
Looks great - Black powder coat, tight clearances, clean angles

AUDI B8 A4 & A5 COLD AIR INTAKE

You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

VEHICLE FITMENT

Audi - A4 2009-2015 (B8-B8.5) 2.0T
Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
Audi - A5 2009-2015 (B8-B8.5) 2.0T

Regular Price: $761.00

Special Price $719.00

Add to Cart

IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD)

Sale

IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD)

2Review(s)

• Proven performance gains for Stage 2 power levels

• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing

• Bolt on fitment - no hassle or poorly fitting parts when you choose IE

• Constructed of 304 stainless long-lasting and high-quality material

• Thick turbo flange - prevents leaks and warping

• High flow 200 cell catalytic converter - full power with reduced pollution and smell

• Metal matrix catalytic structure -

• OEM style flex section - allows for more adjustment and won’t fail

• All inclusive kit - downpipe, midpipes, all hardware

• TIG welded construction - equates to long lasting welds that are less likely to fail

Regular Price: $1,699.00

Special Price $1,574.95

Add to Cart