Search results for 'design'

We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.

This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally,  we finished the assembly by balancing it on a VSR high-speed balancer.

This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.

Features: 

• Complete brand new turbocharger; no need for core to be sent it or purchased
• Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
• Billet MHI-style TD06 compressor wheel
• High performance 9 blade turbine wheel
• Stainless steel turbine housing
• VSR Balanced to exceed OE tolerances
• Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
• Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
• Compatible with OE or aftermarket turbo inlets and turbo outlets

Fitment:

• 2015+ VW Golf/Sportwagen/Alltrack
• 2015+ VW GTI
• 2015+ VW Golf R
• 2019+ VW Jetta GLI
• 2018+ VW Arteon
• 2015+ Audi A3
• 2015+ Audi S3
• 2015+ Audi TT
• 2015+ Audi TTS

 NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.

Gaskets, wastegate actuator, turbo outlet fitting not included.

Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

This valve is designed to fit the FSI and TSI engines of the VAG group (VW, Audi, Seat, Skoda) listed below, including the 2011-2013 2.0l engine using the IHI Turbo.

• 1.4T (with additional fitting kit FMBGFK3)
• 1.8T
• 2.0T

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB. We designed the slots in the body to cover a large surface area, allowing for a quick release of air, resulting in a unique sounding dumpvalve.

 

This upgrade/replacement for your original equipment valve integrates seamlessly with the OEM electronics. Using a wiring harness and solenoid, both tested for each specific application, you can confidentially fit a Forge part knowing that there will be no fault codes, check engine lights, or performance issues with the vehicle!

Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable.

The OEM valve uses a rubber diaphragm and a plastic housing. Both of these materials, but especially the rubber is prone to failure. The rubber can stiffen and go brittle due to the heat from the engine, resulting in diaphragm splitting and boost leak.

Our valve uses full billet alloy construction with a piston based internal design, meaning the issues with the OEM can never happen with ours! To give you even more peace of mind, we made the internals of our valve serviceable. We recommend doing this every 3 years or 20,000 miles, whichever comes first. However, if you don’t want to service your valve yourself you can order the kit and ship your valve back to us and we will carry out the service free of charge! Simply contact us to arrange the service!

The OEM valve internals can also fail if you have your vehicle mapped as the rubber diaphragm is not always strong enough to cope with the increased boost pressure. We build our valves with a spring matched to the original pressure of the car, but include in the kit a spring strong enough to cope with a stage one remap. If you decide to increase the power even more you can guarantee the reliability of our valve by using this spring tuning kit!

This valve was designed by our highly skilled engineers using CAD software to ensure that it will fit with every listed compatible vehicle with ease! 

It is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis. Compared to competitors our valve has a much shorter overall installed height.

The OEM part numbers we have replaced with our valve include:

• 06H145710B
• 06H145710C
• 06H145710D
• 06H145710F
• 06H145710G

Do it right the first time and only purchase a Genuine VW reverse camera.
This flip badge reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the DIscover Media (MIB 1, or MIB 2), Discover Pro (MIB 1, MIB 2 or MIB 2.5) 

Volkswagen Original Rear Emblem Camera KIT Composite(AV) Output Compatible with:

• VW Golf MK7

See behind your car with a camera in your boot.

A camera at the back of your car shows you what's behind to make reversing safer and easier.

Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot.

The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking.

Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer.

Compatible with head unit :
VW Genuine RCD520 
VW Genuine Discover Media (MIB 1, MIB 2)
VW Genuine Discover Pro (MIB 1, MIB 2 or MIB 2.5)

Please note: VAS / OBD11 / VCDS Coding is required after installation.
Professional Installation is recommended, we do not provide installation assistance for this product. 

FAQ's
Does this flip badge camera work with the RCD520?
Yes! It certainly does, no delay timer or AV converter box required. 
What is included in this kit?
The Genuine VW Flip Badge Reverse Camera & Wiring Harness
Will this camera fit an MK5 or MK6 Golf?
No, this camera is designed especially for the MK7 Golf platform only
Will this camera work with an RCD510/RNS510 or RNS315 Radio?
No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below)

Product Description

This is a direct replacement for Part Number 06H 131 111. - It will fit EA888 Gen 3 engine with IHI Turbo IS20 IS38

On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.

Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.

The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console. Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver. The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.

CTS Turbo is proud to announce our new intake system for the B9 AUDI A4, AllRoad, A5, S4, S5, RS4, RS5 (2017-2019 models)

We designed our system to work in conjunction with the OEM air scoop to seamlessly force cold air into the air intake system. Air then flows through our high flow 6″ velocity stack air filter for maximum engine performance.

Our single-piece proprietary moulded silicone couplers allows for smooth entry of air into the engine providing peak power gains ranging from 10-12HP on a stock car.
All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound. Turbo spool up and diverter valve release are a lot louder!

Features:

• Massive 6″ velocity stack filter, largest on the market
• 3.5″ silicone turbo inlet hoses for both 4-cylinder and 6-cylinder engines (5-ply construction, will not collapse)
• Heatshield to keep air temperatures as low as possible
• Easy install and perfect fitment
• Increased engine performance, less turbo lag
• Sporty sound under acceleration and loud pressure release
• Gains of 10-12HP on stock vehicles, tuned cars will gain even more!
• Kit comes with parts to install on 1.8T, 2.0T, 2.9T and 3.0T engines (fits MAF-LESS cars)

Fitment:

• B9 A4 (2017 – current)
• B9 AllRoad (2017 – current)
• B9 S4 (2018 – current)
• B9 A5 (2018 – current)
• B9 S5 (2018 – current)
• B9 RS4 (2018 – current)
• B9 RS5 (2018 – current)

Does not fit cars with MAF sensor.

Installation Guide S4

Installation Guide A4

Retain your VW MK5's 8-button steering wheel controls after installing an RCD330G with this plug and play harness.

This harness is designed to retain the use of every button on your factory steering wheel which will communicate with your RCD330G headunit.

Simply plug in this harness directly into the back of your RCD330G headunit, followed by your vehicles factory quadlock. 

Compatible with:

- Golf Mk5

- Jetta Mk5

- Passat B6

Radio models:

- RCD330

- RCD340

- RCD360

- RNS510

- RCD510

Do it right the first time and only purchase a Genuine VW reverse camera. This boot handle reverse camera does not require any MIB Camera Adapter or Delay Timer as it is a VW Original product designed especially for the latest radios including the RCD330/RCD340 -6RD035187B. Volkswagen Original Boot Lid Camera KIT Composite(AV) Output Compatible with: * VW Golf MK6 Wagon (2010-2013) * VW Tiguan 5N (2007 - 2014) * VW Passat B6 & B7 (Wagon) (2005-2014) * VW Jetta 1K & 5C (2005-2012) See behind your car with a camera in your boot lid. A camera at the back of your car shows you what's behind to make reversing safer and easier. Or rear view camera lets you spot any obstacles behind your car - even moving ones - quickly and easily, thanks to the camera built into the boot. The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Superimposed graphic lines guide you to the optimal steering lock, guaranteeing fuss-free, smooth parking. Using the rear view camera means you'll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you're hitching up a trailer. Compatible with head unit : VW Genuine RCD330 / RCD340 - 6RD035187B VW Genuine Discover Media VW Genuine Discover Pro Radiosystem: Composition Media Not compatible with Composition Media radios with the following part numbers : 5G0035820 5G0035819 5G0035812 Please note: VAS / OBD11 / VCDS Coding is required after installation. Professional Installation is recommended, we do not provide installation assistance for this product.  FAQ's Does this camera work with the RCD330? Yes! It certainly does, no delay timer or AV converter box required.  What is included in this kit? The Genuine VW Handle Reverse Camera & Wiring Harness Will this camera work with an RCD510/RNS510 or RNS315 Radio? No, this camera kit is only compatible with radios that support an AV signal not the 26-pin RGB Plug (as seen below) 

Product Description

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

⭐ Excellent quality product & easy to fit ⭐

The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

As with all Forge products, this hose comes with a lifetime warranty*

This harness is designed to be used for vehicles that have a factory fitted MQB radio and wish to install a VW RCD330/RCD340 Radio. Simply plug in this harness directly into the back of your RCD330G headunit, followed by your vehicles factory quadlock. Compatible with: VW Caddy (2016+) VW Transporter (2016+) If you are unsure whether your vehicle requires this harness, please contact us prior to purchase. Radio models: - RCD330 - RCD340