Search results for 'gt rs'
GT Mustang S550 FN Side Skirt Splitters (Pair)
DETAILSAdjustable Side winglets sold separately.
Finish the exterior aesthetic of your Mustang S550 FN with our side skirt splitters - renowned for their durability under all driving conditions worldwide! For the first time we have included pre-pressed brass thread fittings on both ends of the side skirt splitter, which will allow for the installation of our adjustable Mustang S550 FN side winglets (sold separately) for both front and rear ends of the side splitter. Easy install instructions are included and side skirt removal is NOT required.
The Mustang S550 FN entire body kit range shares the same technology used in our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts around the world.All our lip splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our front splitter stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
Brass threads located on each side will for easy installation of our adjustable Mustang S550 FN side winglets, creating your own style with our bolt-on accessories range (sold separately).
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
GT MUSTANG S550 FN SIDE SKIRT EXTENSION SPLITTER KIT INCLUDES:
- Mustang S550 FN side skirt splitters (pair)
- 2 Flow Designs stickers
- Fitting kit
GT MUSTANG S550 FN SIDE SKIRT EXTENSION SPLITTER MATERIAL & FINISH:
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$419.00
GT Mustang S550 FM Front Splitter Winglets (Pair)
DETAILS
Our adjustable front splitter winglets will bolt directly onto our Mustang S550 FM front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
The Mustang S550 FM body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
Mustang S550 FM front lip splitter and Mustang S550 FM front extensions sold separately.
GT MUSTANG S550 FM FRONT SPLITTER WINGLETS KIT INCLUDES:
- Mustang S550 FM adjustable front splitter winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
GT MUSTANG S550 FM FRONT SPLITTER WINGLETS MATERIAL & FINISH:
- 4.5mm thick textured ABS
- Scratch resistant textured ABS plastic
$79.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi TT MK2 / RS
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. OBD Multi-Gauge Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Audi TT MK2 / RSRegular Price: $605.00
Special Price $544.50
Flow Designs - RS3 8V Sedan FL Full Lip Splitter Set
DETAILS:
The Flow Designs splitter set for the Audi RS3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your RS3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
- RS3 8V Sedan FL Front Lip Splitter & Mounting Brace
- RS3 8V Sedan FL Side Skirt Splitters (Pair)
- RS3 8V Sedan FL Rear Spats (Pair)
- RS3 8V Sedan FL Flow-Lock Rear Diffuser
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Extensions (Pair)
- WITH all accessories package: RS3 8V Sedan FL Front Lip Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
- WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
- ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
- 2 Flow Designs stickers
- Fitting kit
MATERIAL & FINISH:- Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
- Rear diffuser fins, Window Vents and accessories: scratch-resistant textured ABS plastic
- Fire Extinguisher Bracket: 3mm Stainless Steel, Powder-coated Texture Black
$1,251.00
Flow Designs - VW MK8 Golf GTI Side Skirt Splitters (Pair)
DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIREDDETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.
VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.
MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately
KIT INCLUDES:
- MK8 Golf GTI Side Skirt Splitters (pair)
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$440.00
P3 Cars Analog Gauge - VW Mk7 / MK7.5 Golf GTI (2014-2019) - Right Hand Drive
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors$399.00
P3 Cars Analog Gauge - VW Mk6 GTI (2009-2013)
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 SensorsThe P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
$399.00
P3 Cars Analog Gauge - VW Golf MK5 GTI (2005-2009)
P3 Cars - V3 2019 Release
NEW FEATURES
• New control box and updated screen bargraph
• Updated harness with streamlined connectors
• New improved color coded obd2 harness
• Read D.T.C's on command
• Remove unwanted PIDs / gauge modes
• Configure units individually for English/Metric
• Calibrate vehicle speed reading
• Read AFR in Lambda (vehicles with wideband)
• Auto-detect available PIDs / sensors
• Pre-configured analog inputs for P3 SensorsThe P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
4 Available Analog Readouts
- Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
- Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire - read through power and ground wires)
- optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
OEM Vent Option
- We install the display in an OEM vent for your vehicle to make your install even easier.
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Questions? Check out our P3 Analog Gauge install/config page for details.
$399.00
Flow Designs - VW MK8 Golf GTI Full Lip Splitter Set - No Accessories
DESCRIPTION
Suitable for MK8 Golf GTI
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
PACKAGE PRICE FOR THIS SET INCLUDES:
- MK8 Golf GTI front lip splitter with bumper reinforcement plate
- MK8 Golf GTI side skirt splitters
- MK8 Golf GTI rear spats
- MK8 Golf GTI Flow-Lock rear diffuser
- ADD: Rear Window Vents (Pair), Rear Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired.
Please note you are receiving a special price when you purchase the VW MK8 Golf GTI complete body kit splitter set.
DETAILS:
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK8 GOLF GTI FULL LIP SPLITTER KIT INCLUDES:
- MK8 Golf GTI front lip splitter & bumper reinforcement plate
- MK8 Golf GTI side skirt splitters (pair)
- MK8 Golf GTI Flow-Lock rear diffuser
- MK8 Golf GTI rear spats/pods (pair)
- x2 Flow Designs stickers
- x1 Flow Designs air freshener
- Fitting kit
- x1 EDITION 1 stickers (limited to first production run preorder purchases)
MK8 GOLF GTI FULL LIP SPLITTER KIT MATERIAL & FINISH:
- Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
- Hand polished satin black
- Flow-Lock fins: scratch resistant textured ABS plastic
- Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
- Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
- Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
$1,699.00
Flow Designs - VW MK8 Golf GTI Front Lip Splitter & Bumper Reinforcement Plate
DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVALDETAILS:
All Flow Designs MK8 Golf GTI Front Lip Splitters and Reinforcement Parts are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship.The Volkswagen MK8 Golf GTI front lip splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
Further customise your front lip splitter with our accessories range (sold separately), which includes adjustable front lip extensions and front lip winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter - the adjustable options allows you to match the width to the wheel setup of your MK8 Golf GTI. The complete MK8 Golf GTI Full Splitter Kit is also available.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES:
- MK8 Golf GTI Front Lip Splitter
- Stainless Steel Reinforcement Plate
- Pre-mounted adjustable Aerospacers
- 2 Flow Designs stickers
- Fitting kit with black stainless hardware
MATERIAL & FINISH:- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$470.00
SAFE & SECURE SHOPPING
