Search results for 'c'
LEYO Cold Air Intake System
Description:
More air, more power. Leyo Motorsport designed this intake for the 2.0l petrol engine F56 Mini Cooper S and JCW with maximum air flow in mind. Higher flow filter now replaces the restricted OEM filter and high grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market.
Installation is simple and straight forward with no modification needed. Other than the 2.0l petrol F56, it can also be installed in F54, F55 and F57 generation of the Mini family that has the same 2.0l petrol engine. Please make sure to check the design of the MAF sensor found on your car as there is a pre 2018 and 2018+ version, this intake fits the pre 2018 version.
*This product is only for use on the race track.
Specifications:
-
Aluminum heat shield.
-
Fits 2.0l F54, F55, F56, F57.
-
OEM fitment, requires no modification.
-
Easy installation.
BEFORE PURCHASE
PLEASE NOTE
Not suitable for cars with this MAF sensor (LCI version).
This kit is for vehicle with the pre-LCI MAF sensor.
Please check your vehicle OEM airbox before purchase.
$665.99-
LEYO Cold Air Intake System
Description:
LEYO Cold Air Intake System for the Amarok V6 3.0 TDI guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Factory plastic pipe is known to go hard and crack, allowing dust into the turbo. This intake comes with aluminum pipe and heatshield offering better durability and visual appeal.
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3.5 ’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion.
*This product is only for use on the race track.
Specifications:
-
Track and dyno proven for greater horsepower gain.
-
3.5 ’inch diameter for greater air induction.
-
Unique quality and design.
-
Increased air volume and better airflow.
- Open or closed intake design
COMPATIBLE VEHICLES
VW Amarok 3.0 V6 cold air intake system.
VOLKSWAGEN
Year
2016-2022
Model
Amarok
Gen
MK1 FL
Engine
V6 3.0 TDI
BEFORE PURCHASE
PLEASE NOTE
Not suitable for cars with MAP sensor on the airbox lid.
Please check your vehicle OEM airbox before purchase.$829.00-
LEYO AIR Cold Air Intake System
Description:
Looking dull in the engine bay? Want to spice it up a bit? Get your beloved MK5 GTI the bad ass 21st century look with the Leyo Motorsport MK5 GTI Cold Air Intake System.
Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel).
As this kit is compatible with the Golf MK6 Golf R, one day when you decide to level up to the 6R, you can pop your beloved Leyo intake right into the 6R’s engine bay
(don’t show the fellow that sold you the 6R too soon as he might want his car back).
*This product is only for use on the race track.
Specifications:-
OEM fitment requires no fabrication.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
$699.99-
LEYO AIR Cold Air Intake System
Description:
LEYO Cold Air Intake System for the Polo GTI (AW) guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.
LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
Note:
-Only for petrol EA888.3b MQB cars, not for diesel cars.
-Only for vehicles with air flow sensor on factory intake.
-This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3' inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Heat shield included.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
$699.99-
LEYO - AUDI 2.5TFSI EVO 4" COLD AIR INTAKE SYSTEM
Description:
We take our most popular extension to date, throw in some innovation, throw in some creativity and voilà, honey I’ve vanished my paddle extension!
A world first, paddle shift extension that is transparent. See your dashboard unobstructed through the clear extension as well as the glow of the cabin lighting and you might for a split second think they are not even there.
Clear your mind as you blast down the racetrack; Clear your thoughts as you cruise along the coastline; Clear the clutter in front of you, Clear Extension, a first by Leyo Motorsport.
Specifications:-
The ultimate addition to your performance vehicle.
-
Futuristic see-through design.
-
Patented design (Pending).
-
Direct OEM bolt-on. Clips right over existing paddle shifters.
-
Scratch free for your factory paddle.
$919.99-
LEYO - 8V.1 RS3 4" PIPING COLD AIR INTAKE SYSTEM
Description:
Introducing the refreshed Leyo intake system for 8V RS3 (pre-facelift) now with a massive 4” intake pipe! For those of you shopping for a new intake, on the 8V RS3, bigger IS better. Those that says the opposite have factory intake on their cars and you listening to them?
The 8V RS3 with its gorgeous 2.5l engine is one of the most tuned cars on the market. Unleash its full potential, feed more air into it as it has been begging you to. Our new 4” piping is a tuner’s dream come true.
*This product is only for use on the race track.
*This intake does not fit the 2017+ aluminum block 8V RS3.
Specifications:
-
OEM fitment requires no fabrication.
-
Unique quality and design.
-
4’inch diameter for greater air induction.
-
Track and dyno proven for greater horsepower gain.
-
Increased induction sound.
-
Heat shield included.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
COMPATIBLE VEHICLES
For 2015-2017 Audi RS3 8V, does not fit the 2017+ RS3 facelift (8V.2).
AUDIYear ModelTypeEngine2015-2017RS38V2.5 TFSI$899.99-
LEYO AIR Cold Air Intake System V2 - Audi RS3 8V 17-18
Product Details:
Proudly presenting you Leyo Motorsport Cold Air Intake for the facelifted Audi RS3 with the all new 400HP aluminum block. This intake builds on the airbox design of our pre-facelift RS3 intake while integrating factory dampening design on the intake pipe. The intake pipe with the wide 100mm filter flange tapering to 76mm creating a velocity stack design efficiently feeds cold air into the turbo.
Specially designed air box prevents heat soak, effectively extracting colder induction air. For those that wants the open airbox design, Leyo RS3 intake airbox can be both enclosed or open. No fabrication required for installation, bolts straight onto factory mounting points.
*Fits up to 2019 model year.
*This product is only for use on the race track.COMPATIBLE VEHICLES
Brand Year Model Gen Engine Audi 2015-2017 RS3 8V.1 2.5TFSI $749.00
LEYO AIR Cold Air Intake System
Description:
Leyo Motorsport’s CAI for the A4 B9 is a must have for those seeking to upgrade their car. By removing some factory air flow restrictions together with a massive 4 inch conical filter, this intake guarantees more horse power at an affordable cost.
High grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. A secondary heat shield is incorporated into the design to block excessive heat from the exhaust manifold.
Installation is easy and straight forward, no fabrication required.
*This product is only for use on the race track.
*Please note that if your car has air flow sensor on the inlet pipe, this intake does not fit.
Specifications:
-
4” high flow conical filter.
-
Aluminum heat shield.
-
Increased induction sound.
-
Easy installation.
$699.00-
LEYO - MK8 GTI COLD AIR INTAKE SYSTEM
Description:
This MQB Cold Air Intake System for the 2.0T EA888 EVO4 MK8 Golf GTI engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance
This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.
Installation is simple and straight forward, no fabrication required.
*This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3.5’inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Increased induction sound.
-
Direct bolt on & easy installation.
-
Open or closed intake design.
COMPATIBLE VEHICLES
For VW Golf MK8 GTI 2.0 TSI EA888 gen4 engine.
Year ModelGenEngine2020+Golf GTIMK82.0L TSI EA888 evo4$719.99-
LEYO - Oil Catch Can Kit V2 Black
Description:
Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can Kit had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
-
Installs under factory engine cover.
-
Uniquely designed filtration system.
-
Pre-installed drain valve for easy draining.
$919.00-
SAFE & SECURE SHOPPING
