Search results for 'xforce exhaust'
XFORCE - Audi RS3 PFL 8V 4" 200 CEL Cat Downpipe & Catless Tuning Pipe
Introducing the NEW XFORCE Downpipe offering to suit Audi PFL RS3 8V 09/2015-12/2016.
Experience more performance from your Audi RS3 by bolting on our XFORCE Performance Exhaust Turbo Downpipe.
The turbo downpipe stainless steel pipe kit which is equipped with a high-flow cat to achieve maximum flow. Your Audi RS3 will come alive and demand attention!
Over 20 years of exhaust development and technical expertise have gone into creating the ultimate bolt-on performance downpipes, providing power increases throughout the rev range.Dump-Pipe & Cat Kit
-
Features
- Stainless Steel
- Non Polished 3.5″ – 3″ pipe work
- Stainless Steel Flex Bellow
- 200 Cell Metallic High Flow Cat
- Additional Tuning pipe
- 3″ to Twin OEM size adaptor pipe
- Fitting kit supplied
Part No: ESRS315KITB Vehicle Model: RS3 Material: 304 Stainless Steel
COMPATIBLE
- AUDI RS3 8V PFL (2015-2016)
Regular Price: $1,350.00
Special Price $1,189.00
-
XFORCE - Subaru VB WRX Turbo Exhaust Downpipe With Hi flow Catalytic Converter
Description
Downpipe & cat kit
Features
Take your Subaru VB WRX to the next level of performance with the Xforce Downpipe. Crafted from high-quality stainless steel, this downpipe is designed to optimize exhaust flow, reduce back pressure, and increase horsepower and torque for an exhilarating driving experience.
Featuring a direct bolt-on design and a 200 cell high flow cat converter. The larger diameter of the downpipe allows for improved exhaust flow, helping to unleash the full potential of your WRX’s engine.
Upgrade your Subaru VB WRX with the Xforce Downpipe and experience the thrill of enhanced performance and power.
- 3.5″ reducing to 3″ after first bend
- 304 stainless steel
- Brushed finish
- 200 cell cat converter
- Only bolts to Xforce cat back system
Regular Price: $925.00
Special Price $815.00
XFORCE - Facelift 8V RS3 Sedan - Stainless Steel Cat Back Exhaust System with Varex
Twin 2.5" to 3" 304 Stainless Steel Cat Back Exhaust System With Varex
Features
- 3″ Brushed finish stainless steel pipe work
- Hot Dog resonator centre
- Polished Varex R series rear muffler
- Quad 4″ polished stainless tip outlet
Regular Price: $2,650.00
Special Price $2,330.00
XFORCE - VW GOLF GTI MK7/MK7.5 & MK8 2013+ 3" STAINLESS STEEL Downpipe & 200 CELL CAT - CAST TOP V2 2021 Release
This product will only bolt directly to an Xforce axle back system.
- 3" dump pipe from turbo
- 100 cell high flow cat
- "3 connector pipe with resonator
- Will only bolt directly to an Xforce axle back system
Regular Price: $1,200.00
Special Price $1,055.00
XFORCE - 4″ANGLE CUT BLACK TIPS - Fits VW MK6 & MK7/MK7.5 GTI
4" Black Tips for use with Xforce MK6 & MK7/MK7.5 GTI Systems.
Regular Price: $170.00
Special Price $149.00
XFORCE Ford Focus RS Full Turbo Back Exhaust 3" Stainless Varex System
Description
Ford Focus ST Turbo Cat Back Varex System
Features
- Polished stainless steel
- Cat back system
- 3″ pipe work
- Varex rear muffler
- 4″ double walled stainless tips
Part No: ES-FST16-VMK-CBS Vehicle Model: FOCUS Diameter [in]: 3 Material: Stainless Steel Description
Focus ST Turbo 2016- Dump Pipe & Cat
Features
- Brushed finish stainless steel
- 3″ pipe work
- Dump Pipe
- 100 cell high flow cat
- Only directly bolts to Xforce cat back system
Part No: ES-FST16-KITB Vehicle Model: FOCUS Diameter [in]: 3 Material: Stainless Steel Regular Price: $2,465.00
Special Price $2,169.00
XFORCE CEL Eliminator / O2 Sensor spacer
When a high-flow catalytic converter or test pipe is used on a late model car it's guaranteed that CEL (Check Engine Light) will come on.
This CEL is caused by a fault code that indicates an inefficient catalytic converter.
Our CEL eliminator is CNC machined in-house from high quality cold roll steel for a long-lasting effective performance.
Install this spacer on your REAR (downstream, post-cat) oxygen sensor to effectively remove the code for catalyst efficiency.
This is recommended for vehicles that do NOT have "stage 2" software.
This product is not intended to and will not provide emissions compliance.
FOR OFF-ROAD USE ONLY!
Emissions laws vary by state and by province. Check local and federal laws before modifying your exhaust system.
Emissions compliance is the sole responsibility of the vehicles owner. This is a universal product that works on variety of vehicles, however it is not effective on all cars.
$52.00
XFORCE - Toyota Yaris GR Titanium Cat Back System with Burnt Blue Tips
Description
3" XFORCE Titanium cat back system with Burnt Blue Tips to suit Toyota Yaris GR
Features
TITANIUM IS HERE!Transform the driving experience of your Toyota GR Yaris with our ALL-NEW TITANIUM Cat Back Exhaust System, engineered to take your GR to the next level.The Titanium Toyota Yaris GR Cat-back system offers improved performance, amazing sound quality, and impressive weight savings of 4.5 kg below the OEM Toyota GR system. Both plain polished finish and burnt blue tip options are available.These systems are limited in stock, so please contact us today to secure yours.- 3″ Cat Back manufactured in 100% Titanium
- Centre hotdog resonator with anti-resonance chamber
- Dual Rear Muffler with Twin 2.5″ outlets
- Polished Burnt Blue 4″ Angle Cut Tips
- 4.5 kg weight saving over OEM Toyota GR system
- Fits to factory centre joint or bottom of downpipe to give you flexibility in choice
Regular Price: $4,179.00
Special Price $3,680.00
XFORCE - BMW G80 M3 G82 M4 Varex Cat Back System
Description
Varex Dual 3" Cat Back System
Features
Let your twin-turbo S58 sing with our VAREX Valve equipped exhaust system to suit the BMW G80 M3 and G82 M4 Engineered with 3” 304 stainless steel with quad 4” tip outlets, this system projects a symphony like no other. Not only will your M sound the best, it will look the part as well. Designed for the spirited driver seeking a performance exhaust solution with user-adjustable sound control, our system for the G80 M3 completely transforms your behind-the-wheel experience.
- Dual 3” VAREX Cat Back System.
- Mandrel Bent 304 Stainless Steel Brushed Finish.
- Dual 2.75″ OEM Inlet to Dual 3″ Pipework with V-Band Flanged Clamping System for ease of installation and future serviceability.
- Single East-West Dual 3″ Inlet VAREX™ Muffler with Dual VAREX™ valves.
- Quad 3″ Outlet with Polished Double Wall Angle 4″ Tips with bolt on installation
Regular Price: $4,749.00
Special Price $4,179.00
XFORCE - BMW F87 M2 Varex Cat Back System
Description
Varex Dual 2.5"-3" Cat Back System
Features
Introducing the highly anticipated Xforce Varex cat back exhaust system for the BMW F87 M2. Engineered for performance and precision, this exhaust system takes your driving experience to the next level.
Designed to bolt directly to the factory downpipe, the system seamlessly splits into a twin 2.5″ center section, ensuring excellent ground clearance. The flow then collects into a single 3″ pipe, entering the Varex muffler. Experience a deep and aggressive exhaust note that will turn heads wherever you go.
Crafted with meticulous attention to detail, the Xforce Varex cat back exhaust system is built to last, providing maximum durability and performance. The quad 4″ tip outlet adds a touch of style to your BMW F87 M2, making a bold statement.
Get ready to unleash the true potential of your BMW F87 M2 with the Xforce Varex cat back exhaust system. Elevate your driving experience and enjoy the power, performance, and the commanding sound that this system delivers. Upgrade today and make a statement on the road.
- 304 Stainless steel
- Clamps to factory down pipe slip joint
- Slits to twin 2.5″
- Collects to single 3″
- Varex rear muffler with dual outlet
- Quad 4″ tips
$2,199.00
SAFE & SECURE SHOPPING
