Search results for 'design'

Suits Pre-facelift Sportback only Improve the aero aesthetic of your Audi S3 8V PFL Sportback with Flow Designs splitter set! The kit includes front and side splitters, Flow-Lock rear diffuser, rear spats and adjustable accessories all round. Our splitters are designed to fit perfectly to your stock bodykit and are proven as the most durable on the market. Details: Concealed steel brackets are the key feature of this kit. The goal was to create a bracket that is discreet, sturdy and can be assembled without the use of any exposed hardware whilst maintaining the correct angle. Borrowing the technology of Flow-Lock, black powder-coated brackets are slipped in-between each diffuser fin and locked into place. With a simple “push and click” action of the fins, the diffuser is assembled and ready for installation. No “L-Brackets” no double-sided tape, no exposed hardware. The assembled diffuser is now ready to be installed on to the car. Bumper removal is not required, only basic hand tools are necessary. A strong and reliable product that is well designed and easy to install. Kit Includes: Rear valance 4 black powder-coated steel mounting brackets 4 pairs rear Flow-Lock diffuser fins 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite rear valance with bevelled edges 4.5mm thick Scratch resistant textured ABS Flow-Lock Diffuser Fins Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & cracks and become undesirable. Use of ABS Plastic Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.

Volkswagen MK7 Golf GTI Adjustable Rear Spat Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7 Golf GTI Rear Winglets are only compatible with Flow Designs MK7 GTI rear spats only which are designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm. Rear Spats sold separately. Kit Includes: Adjustable Rear Spat Winglets (Pair) 2 Flow Designs Stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf GTI/R Adjustable Rear Spat Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI & R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf GTI/R Rear Winglets are only compatible with Flow Designs MK7.5 GTI/R rear spats only which are designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm. Kit Includes: Adjustable Rear Spat Winglets (Pair) 2 Flow Designs Stickers Fitting kit *** Rear spats are not included *** Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic Fits Models: VW MK7.5 Golf GTI 3 Door VW MK7.5 Golf GTI 5 Door VW MK7.5 Golf R 3 Door VW MK7.5 Golf R 5 Door

Volkswagen MK7.5 Golf GTI Front Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf GTI front winglets are only compatible with Flow Designs MK7.5 GTI front splitter only which is designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. Can also be used in conjunction with MK7.5 Golf GTI Front Extensions (sold separately). Kit Includes: Front winglets 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf GTI Adjustable Front Extensions (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. Our adjustable front extension will directly bolt onto our MK7.5 GTI front splitter thanks to the pre-pressed in threaded brass fittings install int the splitter. Our fitting hard will be provided to ensure perfect fitment and adjustability. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm. VW MK7.5 Golf GTI Front Extensions are only compatible with Flow Designs MK7.5 GTI front splitter only which is designed to be an adjustable direct bolt-on accessory. Accessories not included Volkswagen MK7.5 Golf GTI Front Winglets (Pair) Kit Includes: MK7.5 Golf GTI adjustable front extensions 2 Flow Designs stickers Fitting kit Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic

Volkswagen MK7.5 Golf GTI/R Adjustable Rear Spat Winglets (Pair) Details: The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI & R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. VW MK7.5 Golf GTI/R Rear Winglets are only compatible with Flow Designs MK7.5 GTI/R rear spats only which are designed to be an adjustable direct bolt-on accessory. Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm. Kit Includes: Adjustable Rear Spat Winglets (Pair) 2 Flow Designs Stickers Fitting kit *** Rear spats are not included *** Material: 4.5mm thick ABS plastic Finish: Scratch resistant textured ABS plastic Fits Models: VW MK7.5 Golf GTI 3 Door VW MK7.5 Golf GTI 5 Door VW MK7.5 Golf R 3 Door VW MK7.5 Golf R 5 Door

Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation.

Details:

Why is our splitter so strong? Our front splitter for the MK3.5 ST features 2^nd piece which forms a bridge that is bolt together at specific points to create a brace that spans along the centre of the splitter.

When installed onto your bumper using specially designed steel brackets and mounting hardware (supplied), your bumper is reinforced and our splitter can take on all the scrapes protecting your bumper.

The pre-installed brass thread will accept our adjustable front winglets and extensions, create your own style with our bolt-on accessories which are sold separately.  

Front extensions and winglets are sold separately.

Kit Includes:

• Splitter (2 piece)
• Threaded brass fittings (Pre-Installed)
• 2 Flow Designs Stickers
• Fitting kit

Material:

• 10mm thick polyethylene composite, bevelled edges

Finish:

• Hand polished satin black

 

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better, isn’t it?

As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & cracks and become undesirable.

Install Instruction ( PDF )

Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set, rear spats & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Details Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you. We also have designed in visual prompts so you know exactly where the splitter is meant to sit in relevance to the OEM side skirt. The pre-installed brass thread will accept our adjustable side winglets which are sold separately as a bolt-on accessory to suit our side splitter. These can be viewed HERE. Side winglets are sold separately. Kit Includes: Side splitters (pair) Threaded brass fittings (pre-installed) 2 Flow Designs Stickers Fitting kit Material: 10mm thick polyethylene composite, bevelled edges Finish: Hand polished satin black Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better, isn’t it? As strong and light as Carbon fiber is, it CRACKS on impact or when under load and/or stress. Clearcoat will eventually fade & crack and become undesirable.

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI adjustable front lip splitter extensions
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic

DESCRIPTION
Suitable for MK8 Golf GTI model
INSTALL DOES NOT REQUIRE BUMPER REMOVAL

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable front extension will bolt directly onto our MK8 Golf GTI front lip splitter thanks to the pre-pressed threaded brass fittings installed into the splitter.
Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Front Extensions are only compatible with Flow Designs MK8 GTI front lip splitter which is designed to be an adjustable direct bolt-on accessory.

Front Lip Splitter with Bumper Reinforcement Plate & Front Lip Splitter Extensions (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Front Lip Splitter Winglets (Pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 4.5mm thick ABS plastic
• Scratch resistant textured ABS plastic