Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

• Distinctive vent-to-atmostphre BOV sound
• Suitable for stock or lightly modified vehicles
• Supplied blanking plug gives the option of converting to a full recirculating or full vent-to-atmosphere valve
• Eliminates compressor surge, even in stock applications

ADD POWER, TORQUE, AND SOUND

The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine. 

LEADING FEATURES

• INCREASED HORSEPOWER & TORQUE
• ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
• HIGH-FLOW BELLMOUTH
• MASSIVE OVER-SIZED AIR FILTER
• BLACK POWDER COAT FINISH
• EASY INSTALL WITH NO MODIFICATIONS
• USES FACTORY MOUNTING GROMMETS & HARDWARE
• HEAT SHIELDING & DIRECTED AIR FLOW
• REINFORCED SILICONE HOSES
• FITS DSG AND MANUAL TRANSMISSIONS

YOUR BUILD DESERVES THE BEST

Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.

STOCK-LIKE DIRECT FIT

This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

HIGH-FLOW VELOCITY STACK

The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!

THERMAL BLOCKING HEAT SHIELD

The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

DO YOU NEED AN SAI KIT?

The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.

CLICK HERE to view and download the Cold Air Intake install guide

IE ULTIMATE PERFORMANCE VALVE SPRING & RETAINER KIT FOR 2.0T TSI

This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.

LEADING FEATURES

Description:

Eibach Sportline is an extremely powerful spring system that has been specially designed for enthusiastic motor sports fans who are looking for racing car performance for the road with minimal loss of comfort and maximum driving quality. You achieve ultimate driving dynamics by particularly sporty lowering of the vehicle centre of gravity and by precisely designed, progressive spring rates. Thanks to the lower vehicle centre of gravity, the Sportline sport suspension springs also reduce building up when accelerating, the rolling tilt of the body during cornering and immersion when braking. For Sportline springs, we strongly recommend the use of sports shock absorbers. The Bilstein sport shock absorbers are ideal for this.

Eibach Part: E20-85-051-05-22
Range: Sportline
Front Lowering: 20-30mm (Max front axle load: 1170kg)
Rear Lowering: 20mm (Max rear axle load: 930kg)
Axle: Multi-Link Axle, for all standard damping systems

Eibach performance lowering springs Pro-Kit

The absolute top seller. The number one choice of automotive enthusiasts worldwide. The Eibach Pro-Kit springs are the ideal solution for your series vehicle . The proven spring system maximizes the handling of your vehicle and ensures a sporty look .

The Pro-Kit lowers the center of gravity of your vehicle and reduces the rebound during accelerating, reduces the tendency of the body to roll when cornering and the dipping when braking drives.

The Eibach Pro-Kit in combination with appropriate wheels and tires is the guarantee of success for optimal performance. The lowering with Eibach Pro-Kit springs reduces the unnecessary distance between the tires and the wheelhouse and gives the vehicle a sporty look.

Eibach Pro-Kits are designed by Eibach's chassis engineers and test experts designed to deliver a combination of sporty looks and performance without sacrificing safety or ride quality.

• A leading performance suspension spring system worldwide
• tested for the combination with stock and retrofit dampers
• First step towards a complete sport suspension system
• Lower center of gravity – lowers vehicle up to 40 mm (depending on the vehicle)
• Spring design for traction and attraction
• Progressive spring design
• Performance Handling
• ABE or parts certificate

H&R springs 28826-1 for Audi A3 incl. Lim./ Sedan + Sportback Quattro

H&R sport springs 28826-1 for Audi are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. H&R springs have superb ride comfort and increased driving convenience. 

All H&R springs are made from high-strength spring steel to ensure first-class quality and performance. The springs are designed in such a way that they can be easily combined with standard or retrofit dampers and offer a sporty look. A powder coating also improves corrosion resistance while giving the spring a high-quality appearance.

Product benefits:

• Sporty appearance
• Improved handling characteristics
• Lowered center of gravity
• Linear or progressive spring design
• Compatible with OE and aftermarket shock absorbers
• Powder coated for anhanced appearance and corrosion resistance
• Delivered with ABE or TUV approval
• Engineered, manufactured and tested in Germany

The secret to such success? To put it simply, the technology H&R employs to develop cutting-edge suspension systems for competition use is the very same used to develop innovative suspension components for street-driven cars. In addition, H&R maintains extensive involvement in several touring car, GT and Monoposto racing series. Not to mention the Formula 1- where each circuit may have its own demanding characteristics. 

In the harsh environs of competition, H&R is able to test new materials and innovate production technologies. All of which can help racing teams adapt to changing road conditions accurately and efficiently. 

Vehicle Compatibility:

• Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
  Audi	A3 incl. Lim./ Sedan + Sportback Quattro	Type 8V 4WD without MRC and/or Audi Drive Select/ without MRC and/ or Audi Drive Select for multi-/four-link rear axle / for multi-link /four-link RA	40/40	/

Description:

Eibach performance lowering springs Pro-Kit

The absolute top seller. The number one choice of automotive enthusiasts worldwide. The Eibach Pro-Kit springs are the ideal solution for your series vehicle . The proven spring system maximizes the handling of your vehicle and ensures a sporty look .

The Pro-Kit lowers the center of gravity of your vehicle and reduces the rebound during accelerating, reduces the tendency of the body to roll when cornering and the dipping when braking drives.

The Eibach Pro-Kit in combination with appropriate wheels and tires is the guarantee of success for optimal performance. The lowering with Eibach Pro-Kit springs reduces the unnecessary distance between the tires and the wheelhouse and gives the vehicle a sporty look.

Eibach Pro-Kits are designed by Eibach's chassis engineers and test experts designed to deliver a combination of sporty looks and performance without sacrificing safety or ride quality.

A leading performance suspension spring system worldwide
tested for the combination with stock and retrofit dampers
First step towards a complete sport suspension system
Lower center of gravity – lowers vehicle up to 40 mm (depending on the vehicle)
Spring design for traction and attraction
Progressive spring design
Performance Handling
ABE or parts certificate

Compatible Vehicles:

Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
VW	CC B7 (358)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 BlueTDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg