Search results for 'cs'

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Part No: ESAS3SVKCS RRP: $2,120.00 Diameter [in]: 3 Material: Stainless Steel FEATURES; 3″ Pipe work Brushed finish stainless steel pipe work Hot Dog resonator Polished Varex Race rear muffler Quad 4″ polished stainless tip outlet Installation instructions Download Installation Instructions

Part No: ESKC19VKCS RRP: $1,350.00 Diameter [in]: 3" Material: Stainless Steel Suppliers Product Group: Cat Back System Feature; 3″ Stainless steel pipe work Varex rear Muffler Cat Back system 3.5″ double wall tips Factory secondary cat converter is deleted Smartbox is NOT included Installation instructions Download Installation Instructions

• Part No: ESHY31VKCS
• RRP: $1,599.00
• Diameter [in]: 3"
• Material: Stainless Steel
• Suppliers Product Group: Cat Back System

Cat-Back System 3″ Cat-Back System With Varex in 304 Stainless Steel Part No: ESA45VKCS RRP: $2,120.00 Diameter [in]: 3 Material: Stainless Steel Suppliers Product Group: Cat-Back System : Feature: 3″ cat back system Polished 304 stainless steel mufflers Brushed pipe work Varex rear muffler Fits to factory bumper tips

Details: Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear adjustable diffuser set & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Kit Includes: Front splitter Side splitters (pair) Rear diffuser set WITH adjustable fins Adjustable front extensions (pair) Adjustable front winglets (pair) Adjustable side winglets (pair) Adjustable rear winglets (pair) 2 Flow Designs Stickers Fitting kit Material: Front splitter, side splitters, rear diffuser valance: 10mm thick polyethylene composite, bevelled edges Extensions & winglets: 4.5mm thick textured ABS Finish: Hand polished satin black Rear diffuser fins and accessories: scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Details: Please select your choice of WITHOUT accessories or WITH all accessories in the MK3.5 Focus ST range. Make your MK3.5 Focus ST unique with the Flow Designs splitter set, complete with front & side splitters, rear spats valance & adjustable accessories. Flow Designs splitters are the most durable on the market, with guaranteed fitment to your MK3.5 Focus ST & easy installation. Kit Includes: Front splitter Side splitters (pair) Rear spats valance set (no adjustable fins) WITH all accessories package: Adjustable front extensions (pair) WITH all accessories package: Adjustable front winglets (pair) WITH all accessories package: Adjustable side winglets (pair) WITH all accessories package: Adjustable rear winglets (pair) 2 Flow Designs Stickers Fitting kit Material: Front splitter, side splitters, rear spats valance: 10mm thick polyethylene composite, bevelled edges Extensions & winglets: 4.5mm thick textured ABS Finish: Hand polished satin black Rear diffuser fins and accessories: scratch resistant textured ABS plastic Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

Description: