Regular Price: $269.00
Special Price $198.00
DESCRIPTION
Suits RS3\S3 8V Sedan models
Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
Details
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your S3 8V Sedan (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi S3 Sedan, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle
Eliminate baffling noises
To protect your windows and tint from scratching
KIT INCLUDES:
MATERIAL & FINISH:
FITS MODELS
DESCRIPTION
Window Vents Compatible For RS3 8V Sportback (PFL) model
Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
Details
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your RS3 8V Sportback (Pre-Facelift) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Audi RS3 Sportback, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle
Eliminate baffling noises
To protect your windows and tint from scratching
KIT INCLUDES:
MATERIAL & FINISH:
DESCRIPTION
Suits VA WRX & STI (2014-2020) models
Flow Designs window vents are tested for solid construction and are superior to basic plastic window vents on the market!
PLEASE NOTE: Flow Designs window vents are compatible with any existing air defectors, snap shades and window visors.
TWO rubber trims are included:
Details
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your VA WRX/STI window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your VA WRX/STI, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
Less vibrations at speed and idle
Eliminate baffling noises
To protect your windows and tint from scratching
KIT INCLUDES:
MATERIAL & FINISH:
Keep your car cabin cool during track days with the Flow Designs Australia window vents! These window vents provide much needed air circulation during warmer weather, and are a much more solid construction and safer than any standard window vents available.
Included are rubber seals to prevent any vibrations and grips tight to your MK5 Golf (GTI & R32) window so it is secure to drive with at speed. Our team has ensured the window vents do not allow for any baffling wind noise during driving.
Whether you want to keep your cabin cool during track days, or improve the aesthetic of your Volkswagen MK5 Golf GTI & R32, the Flow Designs window vents are the best option currently on the market!
Rubber seals: please note the rubber seals are a very tight fit. To make the install process easier, soak the seals in warm water to create more flexibility. Once installed the rubber will shrink back for tight fitment. We have developed this tight fitment for the following benefits:
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Check out the V3 install page for configuration and installation info.
Regular Price: $594.00
Special Price $535.00
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price: $594.00
Special Price $534.60
Details:
Why is our splitter so strong?
Our secret is in the cross bar studs. 4 stainless steel studs matched with coupling nuts are bolted directly into the lower OEM crossbar. This allows the splitter to attach directly onto a solid metal section of the vehicle whilst also supporting the front bumper.
When installed correctly, the studs reinforces the splitter from the inside, making this splitter an integral part of the vehicle. This achieves higher tensile load giving it unrivalled rigidity and strength taking on scrapes whilst protecting your bumper. Provisions for transmission and brake cooling have also been taken into consideration.
Pre-assembled aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and spreads the load from impacts as evenly across the surface, it also allows the splitter to follow the contour of the bumper keeping it flat and level.
Not including the hardware that holds all the components together the splitter alone is made up of 5 induvial parts, all designed and developed in Melbourne.
By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7.5 R such as winglets and splitter extensions.
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.