DESCRIPTION Fits Ford MK3 Focus RS DETAILS: Make your Ford MK3 Focus RS unique with the Flow Designs body kit lip splitter kit, complete with front lip & side skirt extension splitters, rear adjustable under spoiler & fairing, rear spats/pods & adjustable accessories. Flow Designs splitters, with a 10 year warranty and are the most durable on the market, with guaranteed fitment to your MK3 Focus RS & easy installation. Pre-installed brass fittings allows you to add on Focus RS side skirt winglets (sold separately). Installation is simple, and to make things even easier, we have pre-drilled all our parts so there is no guesswork for you. We have designed in visual prompts so you know exactly where the lip splitter is meant to sit in relevance to the OEM side skirt. The pre-installed brass thread will accept our MK3 Focus RS adjustable side winglets which are sold separately as a bolt-on accessory to suit our MK3 Focus RS side splitter. OTHERS WHO OWN THIS KIT: MK3 Focus RS Splitter Set MK3 FOCUS RS SIDE SPLITTER KIT INCLUDES: MK3 Focus RS Side Skirt Extension Splitters (pair) 2 Flow Designs stickers Pre-installed threaded brass fittings Fitting kit MK3 FOCUS RS SIDE SPLITTER KIT MATERIAL & FINISH: 10mm thick polyethylene composite, bevelled edges Hand polished satin black Install Instructions (PDF)

Compatible with all Mk1 Q5 Models (8R)

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

OEM Vent Option

• We install the display in an OEM vent to make your install even easier

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!

Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

Need more details? 

Check out the V3 install page for configuration and installation info.

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? (hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

OEM Vent Option

• We install the display in an OEM vent to make your install even easier

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!

Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

Details:

Why is our splitter so strong? 
Our secret is in the cross bar studs. 4 stainless steel studs matched with coupling nuts are bolted directly into the lower OEM crossbar. This allows the splitter to attach directly onto a solid metal section of the vehicle whilst also supporting the front bumper.

When installed correctly, the studs reinforces the splitter from the inside, making this splitter an integral part of the vehicle. This achieves higher tensile load giving it unrivalled rigidity and strength taking on scrapes whilst protecting your bumper. Provisions for transmission and brake cooling have also been taken into consideration.

Pre-assembled aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and spreads the load from impacts as evenly across the surface, it also allows the splitter to follow the contour of the bumper keeping it flat and level.

Not including the hardware that holds all the components together the splitter alone is made up of 5 induvial parts, all designed and developed in Melbourne.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7.5 R such as winglets and splitter extensions.

---

KIT INCLUDES:

• Splitter
• Pre-mounted Adjustable Aero Spacers
• Pre-installed brass thread to accept bolt-on accessories
• 2 Flow Designs Stickers
• Fitting kit

CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

MATERIAL:

• 10mm thick polyethylene composite, bevelled edges

FINISH:

• Hand polished satin black

DETAILS

Front lip extensions and front winglets are sold separately.

Get the original and best front lip splitter for your MK7 Golf GTI, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and car tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest front lip splitters on the market, all our front splitters are backed by our 10 year warranty. Our 10mm polyethylene composite used in our front splitters are completely impact-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our front splitters really are. 

All Flow Designs MK7 Golf GTI front splitters are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship. 

All our front splitters are precision designed to accurately suit the OEM MK7 Golf GTI front bumper. Perfect fitment is guaranteed and instructions are provided for an easy installation process (which can be completed with simple hand tools). 

The Volkswagen MK7 Golf GTI front splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your front lip splitter with our accessories range (sold separately), which includes adjustable MK7 Golf GTI front lip extensions and MK7 Golf GTI front winglets. These can be installed in our pre-pressed brass fittings already installed on the splitter - the adjustable options allows you to match the width to the wheel setup of your Golf GTI. The complete MK7 Golf GTI Lip Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

VOLKSWAGEN MK7 GOLF GTI FRONT LIP SPLITTER KIT INCLUDES:

• Volkswagen MK7 Golf GTI front lip splitter
• Pre-mounted Aerospacers
• Bumper reinforcement bracket
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI FRONT LIP SPLITTER MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black
• Reinforcement bracket: 4.5mm corrosion-resistant aluminium with 10mm polyethylene backing

---

DESCRIPTION
Suitable for MK8 Golf GTI model
OEM SIDE SKIRT REMOVAL REQUIRED

DETAILS:
The Flow Designs splitter set is the best exterior mod for your VW MK8 Golf GTI! With front & side splitters & rear diffuser, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

Our adjustable side skirt splitter winglets will bolt directly onto our MK8 Golf GTI side skirt splitters thanks to the pre-pressed threaded brass fittings installed into the splitter. Adjustable anywhere between 5mm - 25mm on each side increasing the overall width up to 50mm.

VW MK8 Golf GTI Side Skirt Splitter Winglets are only compatible with Flow Designs MK8 GTI Side Skirt Splitters which is designed to be an adjustable direct bolt-on accessory.

MK8 Golf GTI Side Skirt Splitter Winglets (Pair) sold seperately

KIT INCLUDES:

• MK8 Golf GTI Side Skirt Splitters (pair)
• 2 Flow Designs stickers
• Fitting kit with black stainless hardware

MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black